Colour Television 29PT7322 29PT8322 34PT8322 User manual
Thank you for purchasing this televison set.You are now the proud owner of a PHILIPS TV set which promises full value to you as a customer. Please read the instruction manual carefully and thoroughly to help you install and operate your TV set. Introduction Safety Information/Useful Tips .................................................................................................. 3 Before Calling Service ..................................................................................................
Safety Information • – – – Disconnect mains plug when : the red light below the TV screen is flashing continuously. a bright white line is displayed across the screen. cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth. – there is a lightning storm. – the set is left unattended for a prolonged period of time. • No naked flame sources, such as lighted candles, should be placed on top of the TV or in the vicinity.
Below is a list of frequently occurred symptoms. Before you call for service, make these simple checks. Some of these symptoms can easily be rectified if you know what to do. Symptom What you should do Colour patch • Switch off the TV by the mains power button. Wait for 20 (uneveness) minutes before switching on again. • Check the TV is not placed too near speakers or magnetic objects. No power • Check the TV’s AC power cord is plugged into the mains socket.
Antenna Connection 75 • Connect the aerial plug to the antenna socket ¬ on the backcover. • Insert the mains plug into the wall socket. Mains Connection • For correct mains voltage, refer to type sticker at the rear of the TV set • Consult your dealer if mains supply is different. Note: This diagram is not representative of the actual plug and socket. Switching on the Set • Press the main power button to switch on/off the TV.
AV sockets on rear of TV Back of VCR OUT OUT ANTENNA VIDEO IN IN OUT R AUDIO L IN VCR (Equipped with Video and Audio Output sockets You can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO and VIDEO INPUT sockets on the rear of the TV. – Connect the VIDEO and AUDIO IN sockets on the rear of the TV to the AUDIO and VIDEO OUT sockets on the VCR.
Camcorder Connect headphone jack to socket for personal listening For more convenient direct playback connections, the Side Audio/Video Input sockets allow for quick and easy connections, particularly Camcorder tape recordings. – Connect the S-VIDEO socket (if available) from the Camcorder to the Side S-VIDEO socket of the TV. You need not connect the Side VIDEO IN socket of the TV if the S-VIDEO socket is connected.
Connection for recording from the TV channel AV sockets on rear of TV VCR (Equipped with Video and Audio Input sockets – Connect the corresponding INPUT sockets of the VCR to the MONITOR OUTPUT sockets on the rear of the TV. – To enhance the sound of your TV, connect the AUDIO L and R sockets to an external audio system instead of the VCR. For mono equipment, connect only the AUDIO L socket.
Power button Switch set off temporarily to standby mode. (The red light indicator lights up when the set is on standby mode). To switch on set from standby mode, press Channel +/– , Digit (0 -9) or Power button. Teletext Colour buttons In teletext mode, the colour buttons allow you to access directly an item or corresponding pages. Teletext buttons Allows you to access teletext information. For detailed description of functions, refer to section on “Using the Teletext” Smiley button Not applicable.
Main Index Button Not applicable. Frownie button Not applicable Smart Picture Button Press the Smart Picture button repeatedly to access 5 different types of picture settings and choose your desired setting. Incredible Surround Button Allows you to select Incredible Surround, *Virtual Dolby® Surround and Stereo sound when transmission is in stereo mode. Dolby Virtual allows you to enjoy the sensation of Home Cinema surround sound with just 2 front speakers.
‘ & ( § é “ & Remote Sensor Acts as a sensor for activating the controls of the TV when remote control handset is aimed at it. é Standby Light indicator Indicate red light when standby mode is activated. “ Mains Power button Switch mains power on or off. ‘ Volume – / + button Adjust sound volume softer/louder. ( Menu button Display the main menu on the TV screen. § Channel œ / o button Select channel in descending/ascending order.
Operating instructions generally explains the operation of the TV set using the buttons on the remote control unless otherwise stated. Please read the following instructions carefully and follow the steps as shown to familiarise yourself with the installations and all features available in your set. Before you tune in the channels by the AUTO STORE method, select the menu language of your choice. The LANGUAGE feature allows you to set the TV’s on-screen menu to be shown in your desired language.
Step Result on screen Press button Enter LANGUAGE mode. 5 or Select desired language. INSTALL Ñ LANGUAGE • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT Ñ 4 •É ENGLISH B.MELAYU É INSTALL Ñ LANGUAGE • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT Select AUTO STORE. INSTALL • LANGUAGE Ñ AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT •É ENGLISH B.MELAYU É Exit from language mode. Ñ 6 Ñ 7 •É SEARCH É Start automatic tuning.
Manual tuning allows you to store each programme manually. Result on screen Press button 1 Enter main menu. 2 Press button repeatedly until INSTALL is selected. 4 É INSTALL Enter INSTALL menu. • LANGUAGE • AUTO STORE Press button repeatedly until MANUAL STORE is selected. Ñ • • LANGUAGE AUTO STORE MANUAL STORE SORT CHANNEL EDIT Ñ 3 • PICTURE • SOUND • FEATURES • INSTALL É Step COLOUR SYSTEM É •SOUND SYSTEM MANUAL STORE SEARCH SORT CHANNEL CHANNEL EDIT STORE É 14 •É 196.
This feature allows you to select your desired COLOUR and SOUND system. If AUTO is selected, the respective colour and sound system will be automatically selected according to the transmission system. Note : Select your desired colour and sound system manually if reception is poor at AUTO mode. Step Result on screen Press button Repeat step 1 to step 5 as in “MANUAL TUNING OF CHANNELS” COLOUR SYSTEM is selected. Enter COLOUR SYSTEM mode. 7 Select the desired colour system.
This feature allows you to adjust picture reception in areas of weak reception. Ñ INSTALL Ñ LANGUAGE • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT •É ENGLISH B.MELAYU ÉÉ 1. Enter main menu. 2. Select INSTALL. 3. Enter install menu. Step Result on screen Press button Press button repeatedly until MANUAL STORE is selected. Ñ Ñ INSTALL • LANGUAGE • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT Ñ 4 COLOUR SYSTEM SYSTEM SEARCH CHANNEL STORE É •SOUND É 5 Enter MANUAL STORE menu.
This feature allows you to change the channel number to your choice for a particular TV station. Ñ INSTALL Ñ LANGUAGE • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT •É ENGLISH B.MELAYU ÉÉ 1. Enter main menu. Step Result on screen Press button Press button repeatedly until SORT is selected. FROM •É TO EXCHANGE Ñ Ñ INSTALL • LANGUAGE • AUTO STORE • MANUAL STORE •É SORT • CHANNEL EDIT Ñ 4 2. Select INSTALL. 3. Enter install mode.
This feature allows you to edit or skip channels which have bad or weak TV signal or channels that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by the CHANNEL + or – button.You can only access the channel by the DIGIT (0 -9) button. Ñ INSTALL Ñ LANGUAGE • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT •É ENGLISH B.MELAYU ÉÉ 1. Enter main menu. Step 2. Select INSTALL. 3. Enter install mode.
This feature allows a selection of 10 channels of pre-defined names. It also allows you to enter a new name or modify an existing name of a channel for 40 channels including external channels. Ñ INSTALL Ñ LANGUAGE • AUTO STORE • MANUAL STORE • SORT • CHANNEL EDIT •É ENGLISH B.MELAYU ÉÉ 1. Enter main menu. Step 2. Select INSTALL. 3. Enter install mode. Result on screen Press button Press button repeatedly until NAME is highlighted.
The picture and sound menus allow you to make adjustments to the picture and sound. It also allow you to select and activate other features in the menu. (MENU) button to enter main menu. 1. Press the (CURSOR UP / DOWN) buttons to select the items on the or 2. Use the PICTURE / SOUND menu. (CURSOR LEFT / RIGHT) buttons to access the sub-menus. or 3. Use the Activities PICTURE Ñ Picture menu items Ñ Increase or decrease brightness level. Increase or decrease color level.
This feature automatically adjust settings for optimal picture quality continuously under any signal conditions. To activate the Active Control feature, select the “ON” option in the Active Control menu. How to access the Active Control function É É FEATURES • TIMER Ñ (CURSOR DOWN) button to 3. Press the select ACTIVE CONTROL. 5. Press the (OSD) button to exit menu from screen. 21 ACTIVE CTRL • CHILD LOCK • FORMAT • ROTATION •É OFF FEATURES Ñ (CURSOR RIGHT) button 4.
The Timer feature allows you to set the timer to switch to another channel at a specified time while you are watching another channel or when the TV is on standby mode. Note : For the timer to function, the set must not be switched off. Once the set is switched off, the timer is disabled. Step 1 Result on screen Press button Enter TIMER menu. 8 Exit from START TIME mode. 9 Select STOP TIME. 10 Enter STOP TIME mode. 11 Key in the time you want the programme to be switched off.
Step Result on screen Press button Exit from STOP TIME mode. 13 Select CHANNEL. •É 8 ÉÉ Select ACTIVATE. FEATURES TIMER • TIME • START TIME • STOP TIME Ñ CHANNEL • ACTIVATE 3 Ñ 15 Key in the channel you want to switch to.
The Child Lock feature allows you to lock channels to prevent your children from watching programmes you deem undesirable. Note :You cannot have access to the locked channels via the top controls of the TV set. You can only have access to the locked channels via the remote control. Keep the remote control out of reach so as to prevent your children from having access to it. FEATURES Ñ Ñ •É TIMER • ACTIVE CTRL • CHILD LOCK • FORMAT • ROTATION 1. Enter main menu.
Step 8 Result on screen Press button Select CHANGE CODE. 9 Enter CHANGE CODE mode. 10 Key in the access code of your choice. 11 Confirm access code. When the new code is confirmed, the message CORRECT will appear.
FEATURES Ñ Ñ •É TIMER • ACTIVE CTRL • CHILD LOCK • FORMAT • ROTATION 1. Enter main menu. Step 2. Select FEATURES. 3. Enter FEATURES menu. Result on screen Press button 4 TIME START TIME STOP TIME CHANNEL ACTIVATE Select CHILD LOCK . FEATURES • TIMER • ACTIVE CTRL •É CHILD LOCK • FORMAT • ROTATION Ñ Ñ ACCESS CODE ---- 5 Enter ACCESS CODE mode. 6 Key in access code . FEATURES • TIMER • ACTIVE Ñ Enter LOCK CHANNEL mode. 7 10 Select the channel you want to block.
To unlock channels that you have locked, enter the Child Lock menu and activate the CLEAR ALL mode. FEATURES Ñ Ñ •É TIMER • ACTIVE CTRL • CHILD LOCK • FORMAT • ROTATION TIME START TIME STOP TIME CHANNEL ACTIVATE 1. Enter main menu. 2. Select FEATURES 3. Enter FEATURES menu. Step 4 Result on screen Press button Select CHILD LOCK. FEATURES • TIMER • ACTIVE CTRL •É CHILD LOCK • FORMAT • ROTATION Ñ Ñ ACCESS CODE ---- 5 6 Enter ACCESS CODE mode. FEATURES • TIMER • ACTIVE Key in access code.
You can have a choice of different formats for your viewing pleasure, namely : - Auto, EXPAND 4:3 mode, COMPRESS 16:9 mode and 4:3 mode through the FORMAT menu. How to access the Screen Format É • PICTURE • SOUND • FEATURES • INSTALL É É (MENU) button to enter main menu 1. Press the (CURSOR DOWN) button and press the repeatedly until FEATURES is selected. (CURSOR RIGHT) button to 2. Press the enter FEATURES menu. TIMER ACTIVE CTRL CHILD LOCK FORMAT ROTATION (CURSOR DOWN) button 3.
Due to the earth’s magnetic field and positoin of the TV set, slight tilting of the picture to the left or right may occur when the set is switched on. When this phenomenon occurs, select ROTATION in the FEATURE menu and adjust accordingly by the Cursor Right or Left button. (CURSOR DOWN) button 3. Press the repeatedly until ROTATION is selected.
Blue Mute feature indicates to you the absence of signalwhen the TV screen turns blue. To activate the Blue Mute feature, select the “ON” option in the Blue Mute menu. How to access the Blue Mute function (CURSOR DOWN) button 3. Press the repeatedly until BLUE MUTE is selected. É FEATURES • ACTIVE CTRL • CHILD LOCK • FORMAT • ROTATION Ñ (OSD) button to exit menu from screen. 30 •É OFF FEATURES • ACTIVE CTRL • CHILD LOCK • FORMAT • ROTATION Ñ 5. Press the BLUE MUTE Ñ (CURSOR RIGHT) button 4.
SMART PICTURE feature offers you a choice of 5 picture settings, namely, PERSONAL, RICH, NATURAL, SOFT and MULTIMEDIA. SMART SOUND feature offers you a choice of 4 sound settings, namely PERSONAL, VOICE, MUSIC and THEATRE. (SMART SOUND) button repeatedly to cycle (SMART PICTURE) or Press through the settings to select your desired mode. Definition of Picture Settings PERSONAL RICH : Picture settings are set to your preference. : Emphasize very vibrant colours.
If a TV channel broadcast contains teletext information, each channel that broadcasts teletext transmits a page (index page) with information on how to use the teletext system, usually on page 100. The system transmitted is indicated in the option line at the bottom of the screen. Press button Result on screen On/Off teletext and Superimpose teletext page over TV programme Press the button once to switch on teletext display. (A channel in which teletext is being transmitted must be selected).
Press button Result on screen Hold Not applicable. Interrupt Not applicable. Selecting a subpage For a teletext page with subpages, press the Cursor Left or Right button to access the previous subpage or the next subpage. Reveal/Conceal Press the button once to reveal hidden information (solutions to puzzles, riddles, etc). Press the button the second time to conceal information. This button is applicable only to teletext page with puzzles, riddles, etc.
29PT7322 29PT8322 34PT8322 Picture tube screen size 72 cm 72 cm 85 cm Picture tube visible area 68 cm 68 cm 80 cm Audio Output : Speaker Subwoofer 2 x 10W RMS – 2 x 10W RMS 10W TV System NTSC M PAL B/G PAL D/K PAL I SECAM B/G SECAM D/K SECAM KI Playback System 480p 1080i NTSC 3.58 NTSC 4.43 PAL 60 Set Dimensions : Width Depth Height Net Weight of Set (approximate) 74.6 cm 49.3 cm 57.8 cm 74.6 cm 49.3 cm 57.8 cm 87.2 cm 55.8 cm 67.8 cm 44.
3139 125 32361
