Register your product and get support at www.philips.
Contents 1 Notice 2 2 Important 3 Product disposal Guidelines 4 3 Use your TV 5 4 Use more of your TV 11 5 Play photos, music and videos on USB storage devices 14 6 Troubleshooting 16 7 Product information 18 8 Table Stand Installation 20 9 Consumer Guidelines 21 10 Warranty 22 EN 1
1 Notice Pixel characteristics This LCD/LED product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. 2 EN Warranty No components are user serviceable. Do not open or remove covers to the inside of the product.
2 Important Risk of injury or damage to the TV! • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. Read and understand all instructions before you • When stand mounting the TV, use only use your TV. If damage is caused by failure to the supplied stand. Secure the stand to follow instructions, the warranty does not apply. the TV tightly. Place the TV on a flat, level surface that can support the combined weight of the TV and the stand.
Risk of damage to the TV! • Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. Risk of injury, fire or power cord damage! • Never place the TV or any objects on the power cord. • To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times.
3 Use your TV Congratulations on your purchase, and welcome to Philips. To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. 3.
3.
3.
3.
1 • 2 Multimedia Control buttons • Control video or music. 3 • SOURCE Selects connected devices. • TV Access the TV mode. • LIST Access the Channel List. 4 5 6 • 7 (Standby-On) Switches the TV ON or OFF. The TV is not powered off completely unless it is physically unplugged (Navigation buttons) Navigate through menus and select items. (Also in USB mode). OK • Confirm an entry or selection. 8 • FORMAT Adjust picture format. 9 • 10 Return to the previous menu or exit a function.
3.6 Battery Installation 1. Remove the battery compartment door. 2. Install 2 “AAA” or UM-4 (1.5V) batteries or equivalent with the correct polarity as indicated. 3. Refix the battery compartment door.
4 Use more of your TV Dynamic Contrast Picture Sound Noise Reduction Off Middle Flesh Tone Off Dynamic Backlight Off Features 4.1 Main Menu Installation Menus help you to install channels, change picture and sound settings and access other TV features. 1 Press » The menu screen appears. 1 Press . 2 Select [Setup] then press OK > Select [Picture]. 3 Select one of the following settings, then Press to move, and press to adjust. [Smart picture] : Access predefined smart picture settings.
4.4 Manually adjust sound setting Color Temp. Picture Freeze Smart Sound Sound Picture Features Sound Balance Treble Features Installation Bass AVL Installation Equalizer Incredible Surround [Color Temp.] : Adjust the color balance in an image. [Freeze] : Select option as ON to freeze the picture. • • Note • Depending on the format of the picture 1 Press . 2 Select [Setup] then press OK • > Select [Sound]. Select one of the following settings, then Press to move, and press to adjust.
4.6 Features Menu • [Max Volume]: This function is used to limit the max volume in TV. Select [Setup] then pressOK > Select [Features] • [Start Source]: This function is used to set the signal source after TV power on. Select one of the following settings then Press to move, and press to adjust. • [Start Channel]: This function is used to set the access channel after TV power on. • [Volume Default]: This function is used to set the default volume value after TV power on.
2 Press . Select [Setup] then press OK > Select [Installation] 3 Select one of the following settings, then 1 • • • • • Press to move, and press to adjust. [Color System] : Change the color system (AUTO/PAL/NTSC) setting if the picture is not reproduced properly. Note: For India color system is Auto or PAL. [Sound System]: Change the sound sound system (BG/M/DK/I) setting if sound is not reproduced properly. Note: For India sound system is BG. [Skip]:This function is used to Skip any program.
5.1 Connect a USB storage device to play photos, music or videos stored on it. 1 2 3 4 Switch on the TV. Connect the USB device to the USB port on the side of your TV. Press Select [Browse USB], then press OK The USB browser appears. 5.7 Music, Photo, Movie, Text mode control menu bars You can select the multimedia functions like play, Pause, FF, FB, Next, Previous. Stop etc. To use above functions press OK key while playing files on TV screen. Picture mode menu bar: 5.
6 Troubleshooting 6.3 Picture issues The TV is on, but there is no picture: Check that the antenna is properly This section describes commonly encountered connected to the TV. issues and accompanying solutions. Check that the correct device is selected as the TV source. There is sound but no picture: Check that the picture settings are 6.1 General TV issues correctly set. The TV does not switch on: There is poor TV reception from an antenna Disconnect the power cable from the power connection: outlet.
6.4 Sound issues 6.7 Contact us There is a picture but sound quality is poor: If you cannot resolve your problem, refer to the FAQs for this product at www.philips.com/support. or Contact Customer Service Center. Note If no audio signal is detected, the TV automatically switches the audio output off this does not indicate malfunction. Check that all cables are properly connected. Check that the volume is not set to 0. Check that the sound is not muted.
7 Product information 7.3 Remote control Type: YKF293-001 Batteries: 2 x AAA (LR03 type) Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. 7.4 Multimedia 7.
7.6 Supported TV mounts To mount the TV, purchase a Philips TV mount - compatible TV mount. To Prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5 cm from the back of the TV. Warning Follow all instructions provided with the TV mount. PE Electronics Ltd. bears no responsibility for improper TV mounting that results in accident, injury or damage.
Table Stand Installation Notes: If the table stand has been assembled, just ignore the following instructions. Follow the instructions accordingly based on the table stand supplied to you and graphics shown below are for illustrative purposes only. The TV unit and screws is subject to material object. 1. Place the TV with the display side down on a flat surface, Use a cloth to protect the display. 2. Attach the stand Pillar to the TV set and fix the stand pillar with scerw supplied.
Consumer Guidelines 1.Kindly ensure that the dealer fills out warranty card correctly. 2.To avail the Warranty please register your product with the Philips• Log on to www.Philips.com OR • Contact Philips Consumer Care Centre 3.In the unlikely event of a defect developing in the TV set contact the Philips Customer Care Centre for obtaining warranty service and inform of the defect observed in the set, the type no. and serial no. of the set. 4.
WARRANTY This TV receiver is covered under warranty against any defect arising out of faulty or defective material or workman ship for a period of 12 months from the date of purchase. Should a defect develop in this set during the period of warranty, PE Electronics Limited undertakes to get the set repaired free of charge either from whom the set has been purchased or through an Authorised Service Center for warranty service.
