fi fi flfiff www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor..................7 2.3 Remove the Base Assembly for VESA Mounting.............................
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours. Try to keep your eyes from eye strain while using the screen for a constant period of time by : such as, alcohol, or ammonia-based liquids to clean your monitor. • To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.
1. Important “burn-in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “afterimage” or “ghost image” symptoms that will not disappear and cannot be repaired.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. 2.1 Installation In order to well protect this monitor and avoid scratching or damaging of the monitor, keep the monitor face down in the cushion for the base installation. Package contents E line 292E2 Quick Start Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands. (1) Gently attach the base to the stand.
2. Setting up the monitor Connecting to your PC Connect to PC 1. 292E2AE Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 2 3 4 5 6 1 3. Connect the monitor signal cable to the video connector on the back of your computer. 2 1 4. Plug the power cord of your computer and your monitor into a nearby outlet. 2 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below: Press to switch power on.
orthemni2.Sgup Main menu Sub menu Resolution notification MPRT MPRT Level On, Off 0~20 SmartResponse SmartFrame Off, Fast , Faster, Fastest On, Off Size (0,1,2,3,4,5,6,7) Brightness (0~100) Contrast(0~100) H. position V. position LowBlue Mode On Off 1,2,3,4 Input 1 HDMI 1.4 2 HDMI 1.4 DisplayPort Auto On, Off Game Setting Picture PIP/PBP Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 2.3 Remove the Base Assembly for VESA Mounting 1. 2.4 MultiView Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. What is it? Multiview enables active variety connect and view so that you can work with multiple devices like PC and Notebook side-by-side simultaneously, making complex multi-tasking work a breeze. 2. While keeping the release button pressed, tilt the stand and slide it out.
2. Setting up the monitor 1. Toggle to the right to enter OSD Menu Screen. When the sub source is not detected. 2. Toggle to the up or down to select main menu [PIP / PBP], then toggle to the right to confirm. 3. Toggle to the up or down to select [PIP / PBP Mode], then toggle to the right. Note The black strip shows on the top and the bottom of the screen for the correct aspect ratio when in the PBP mode.
2. Setting up the monitor Top-Left B A Top-Right B A (main) (main) Bottom-Left B • A Bottom-Right A (main) B (main) Swap: The main picture source and the sub picture source swapped on the display. Swap A and B source in [PIP] mode: B A (main) A ↔ B (main) Swap A and B source in [PBP] mode: A • (main) B ↔ B (main) A Off: Stop MultiView function. A (main) Note When you do the SWAP function, the video and its audio source will swap at the same time.
3. Image Optimization How to enable SmartImage? 3. Image Optimization 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance. 1. Toggle to the left to launch the SmartImage on screen display. 2.
3. Image Optimization • RTS: For playing RTS (Real Time Strategy) games, a user-selected portion can be highlighted for RTS games (through SmartFrame). The picture quality can be adjusted for the highlighted portion. • Gamer 1: User’s preference settings saved as Gamer 1. • Gamer 2: User’s preference settings saved as Gamer 2.
4. AMD FreeSyncTM • AMD Radeon R7 260X • AMD Radeon R7 260 4. AMD FreeSyncTM ■■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. Technical Specifications 5. Technical Specifications Picture/Display Display Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio (typ.
5.
5. Technical Specifications Environmental and energy RoHS Packaging Specific Substances Cabinet Color Finish Yes 100% recyclable 100% PVC BFR free housing Black Textured Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
5. Technical Specifications your capability of graphics card and BluRay/video players. 5.1 Resolution & Preset Modes Maximum Resolution 2560 x 1080 @ 75 Hz Recommended Resolution 2560 x 1080 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 35.16 800 x 600 56.25 37.88 800 x 600 60.32 48.08 800 x 600 72.19 46.88 800 x 600 75.00 47.73 832 x 624 74.55 48.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.
7. Customer care and warranty Three adjacent lit sub pixels (one white pixel). Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
8. Troubleshooting & FAQs • 8. Troubleshooting & FAQs Visible signs of smoke or sparks 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Make sure the signal cable is properly connected to your computer. • Make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable.
8. Troubleshooting & FAQs “after-imaging” or “ghost imaging” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. 8.2 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this monitor: 2560 x 1080. Image appears distorted. Text is fuzzy or blurred.
8. Troubleshooting & FAQs Q3: How do I adjust the resolution? enter color setting, there are three settings as below. 1. Color Temperature; With settings in the 6500K range the panel appears "warm, with a redwhite color tone", while a 9300K temperature yields "cool, bluewhite toning". Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties".
8. Troubleshooting & FAQs Q9: Are Philips LCD monitors Plugand- Play? Q12: How to unlock/lock my hot key? Ans.: Please press for 10 seconds to unlock/lock the hot key, by doing so, your monitor pops out “Attention” to show the unlock/ lock status as shown below illustrators. Ans.: Y es, the monitors are Plug-andPlay compatible with Windows 10/8.1/8/7, Mac OSX. Q10: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? Ans.
2020 © TOP Victory Investment Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
