About this Handbook This is a handbook 16 help you with the installation and operation of your new menu TV. With a menu TV, menus can be called up on the screen. These menus provide information either about operations to be carried out or about functions that you can select. This handbook consists of two parts Installation This part helps you with installing your TV and with locating and storing your TV channels. To do this, follow the directions of the INSTALLATION menu very closely and step by step.
Preparation Place the TV on a solid surface. For ventilation, leave a space of at least 5 cm. free all around the set. This TV requires a mains voltage of 220 V -~ 240 insert the mains plug in the wall socket. Hook supplied for educable, see Peripherals Connecting, p. 20. 5 Insert the aerial plug tightly into the aerial socket "I on the back of the TV with an aerial cable of good duality.
Installation I -t el Switching TV on o Press the switch ® on the front of your TV set. = A green or red lamp lights up. green ® or red D e, = The TV is switched on, The TV Is switched on but the screen stays The screen lights up. dark. Your TV is on standby. o Press the TV key on the remote control. Pontoon. = The green lamp lights up and blinks every time you press a key on the remote control, = The TV switches on. The screen lights up. Pontoon.
4 step G Searching for and storing TV channels After you have switched on your TV and selected your menu languages, you can search for and store your TV channels, To search for and store your TV channels, you need the INSTALLATION menu. Within the installation menu you yourself assign each of these TV channels a number and a name of your own choice, which are then used to call the channels up for viewing. © Open the control panel cover on the front of the TV, o Press Install on the TV control panel.
" Installation Searching for a TV channel This can be done in two different ways ! Either automatic searching or else entering a frequency yourself. Automatic searching OF Entering a given frequency yourself The TV itself searches for the channel. ATV channel is transmitted at a certain frequency. Press the green key by you know the-frequency; you can enter it SEARCHING appears and the TV is searching for directly and in this way call up the TV channel. a channel.
A step __J Entering the programmer number o Now you yourself must assign a number of your choice to the TV channel located. In this way you decide for yourself the order of all your TV channels, With the assigned programmer number you can call up your TV channel again later. Press the yellow key ¢, Hold down the P~ or + key on the remote control until the desired programmer number appears in the menu. Go on to step d.
step ._J Storing steps A to d Now the TV system, the located TV channel, its programmer number and its programmer name must be stored in the memory. o Press the white key e. B PROGRAMMER STORED appears briefly at the top of the menu, B The TV channel Is stored in the memory. repeat Do you want to store another TV channel? © Then repeat steps a-b-c-d-e. Are you connected to the cable system? < Then begin immediately with step b, You have already selected the TV~ system in step a for all channels.
°ovgao Operation After the installation you can operate the with the remote control. TUNER OO TAPE] A Every time you press a key on the remote control, the green lamp @ on the front of your D06 TV set blinks. @ The letters TV in the display must be Grey block. ® O If this is not the case, then first press the TV T key under the display. Switching TV on and off Press © on the front of your TV. A green lamp O lights up. pr1 appears briefly and possibly also the programmer name.
‘Operation _| Main Menu s> You use the keys in the Grey area of the drawing to operate the main menu. o000 006 000 ET in the main menu you can: « adjust picture and sound according to personal preference. + select recording sources for your video recorder «+ select from among various special features. «+ calf up a programmer list with an overview of the TV channels stored. Press m Menu, The MAIN MENU appears. MAIN MENU Press off to switch off sate menu. 5= ond & m recording source A m special lectures.
10 7o Adjusting the Sound SHUT Press MENU. o butane Press the green key b. e off The SOUND menu appears. om sound made select: a8 mean ol Balance, treble, bass Press one of the color keys to select the adjustment you want to regulate, The selected adjustment lights up blue. Press menu order to regulate the selected adjustment, Press a color key again to select another adjustment. Do you want to store the modified adjustment in the memory? Press PP store on the control pane on the TV.
MENU OFF © yo gooey Special Features Press MENU. Press the blue key d. SPECIAL FEATURES appears. Press a color key in order to choose between child lock, sleep timer, display programmer number, demonstration or pip size. {for the sets with the picture in picture option) Your choice lights up blue. Press menu order to regulate the selected adjustment. Press once more on & color key to make another choice.
12 Other functions TARS attaining H PP key With the PP key you can call up again the picture and sound adjustments which have been stored with the PP stare in the picture and sound menu. © Press PP On Screen Display (OSD) After the selection of a TV channel the following information appears briefly on your screen: « the programmer number and name + DIGITAL SOUND AVAILABLE if the TV-station transmits digital sound.
Operation _| Spatial and Surround Sound © Press GD. @D &= The lamp & on the TV lights up. 1t seems as though the loudspeakers are spread further apart from one anther. You get a spatial sound effect, o Press @® again in order to switch off. \% @l You achieve a Surround Sound sound effect if you have two or fora o < maximum effect four extra loudspeakers connected. “ " See Peripherals, p. 21. o Place the loudspeakers in the corners of an imaginary square.
14 Pip Picture in Picture & essayer GO—O® 000 o ° Q@O 900 @® 2 22 020 Picture In Pistils 00 For TV sets with the Picture in Picture option. With pip, picture in picture, you can call up a little screen within the main TV screen. Thus at the same time you can watch a programmer from other equipment, connected with a educable, The picture in the small screen has no sound, Switching pip on and off o Press (M, = The pip screen appears and the image is the same as in the main screen.
° Switching screens Press (3. The main screen and the pip screen exchange places . if the TV channel is only in the pip screen and not in the main screen, then use the pip keys in order to change your TV channel in the pip screen . Still Picture Press 3. The picture-in the pip screen stands still .« Even when pip is not switched on, the main screen will appear as a still picture in the pip screen . Press (M again or select another channel in the pip screen in order to cancel the still picture .
Teletext Tavern 2000 [towelette] [footnote] Switching Teletext On and Off Most TV channels broadest information via teletext. Each channel which broadcasts teletext transmits g page with information on how to use its teletext system. Look for the teletext page with the index {usually page 100). TV programmed are sometimes subtitled for the hard of hearing. Depending on the TV channel, teletext is transmitted in different systems: WST, TOP, FLOG.
Special teletext functions Hold A selected page number sometimes contains automatically rotated sub pages. The total number of sub pages and the sub page displayed are indicated on the screen. For example: 1/4, Press € in order to hold a sub page. 2% appears in the information line. “The information in this sub page is not being updated by the teletext editorial office. Press s again. The sub pages rotate again. Reveal Some pages contain concealed information, such as solutions to riddles and puzzles.
18 google 7o 00 evolve 7o Teletext preference list Storing personal preference pages. You can store 20 preference pages in the teletext page memory. Select your TV channel. Press . Press Install on the control panel on the TV, TELETEXT PAGE MEMORY appears. A white bar, the cursor, appears on the first fine of the Hist. Hold the green key b pressed down until the white bar appears on the first free line of the list The programmer number of the selected TV channel appears.
Peripheral Equipment Peripheral Equipment There is a wide range of electronic equipment that can be connected to your TV, This connection diagram shows where the different equipment should be connected. You will find mare information about connecting and operating the various equipment in the fallowing pages.
20 Connecting &. Connecting your video recorder and other electronic equipment with ably an aerial cable © Unplug the aerial plug from your TV and insert it into the aerial input ™™ of your equipment. o Connect the aerial plug supplied to the cutout (Y of your equipment and to the aerial input "™ of your TV. See line [Z]. © Switch on your equipment. o Now look for the test signal of your equipment on your TV, Check in the handbook of the particular equipment 1o see what the test signal looks fiche.
d. Connecting equipment with audio/video cables Audio equipment o Connect the audio cables to the audio input of your e audio L {white} and audio R (red} of your TV. See line & You can now listen to your TV sound via your audio equipment, o Press K on the remote control. > The internal loudspeakers of your TV are switched off. Camera/Camcorder/Computer © Connect your camera, camcorder or computer to FRONT at the front of your TV. See line [8], [12] .
22 Reproducing Picture and Sound 000 g Most of the audio and video equipment from our range of products can be operated with the remote control. a. from equipment connected only with an aerial cable < Switch your TV on, © With the digit keys select the programmer number under which you have stored the test signal. © Switch on the equipment with the remote control, = The picture is reproduced.
Peripheral Equipment | d.from equipment connected to the front of the TV. o Switch your TV on. Hold the key Por + pressed in until the indication Front 58 appears on the screen. 9 ROT Switch your equipment on. VCR 1 & The picture is reproduced.
24 @ halal Tips Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the outside aerial. is the picture unrecognizable? Check if you have entered the correct frequency or adjust the frequency by fine tuning. See Installation, p. 4.
