User Guide

7
Tuning-in the digital channels
To use the digital menus
Store channels
Change channel number
This menu enables you to make all the adjustments required to
receive digital channels.
æ Press the MENU key on the remote control to display the main menu.
If the main menu does not appear,the television is in analogue mode.
Press the key on the remote control to switch the TV in digital mode.
 Use the cursor key in the up/down,left/right direction (xyÏq) to
select a menu item.For more information see page 4.
ê Press the key in the centre of the cursor to activate.
® Use the RED key or the EXIT key to return or to switch menu off.
You can also use the digital keys to for direct access to the menu item
æ From the main menu,use the y key to highlight the getting started
option and press the key in the centre of the cursor to select.
Alternatively,you can press the key for direct access to this option.
 Now select the store channels option (y key) and press .
The television begins to search for all available channels.The search
operation takes approximativaly 20 minutes.The display on screen will
indicate the number of channels that have been found and the
percentage of the installation that has been completed.
When complete,the channel list menu is automatically displayed.
ê You can check what channels have been found by using the xy keys
to consult the list displayed on the screen.
® Press the EXIT key.The television then displays the current programme
being broadcast on channel 1.
If no picture is found,refer to the chapter entitled Tips on page 27.
If you want to stop the search, press the EXIT key.
This menu enables you to choose the order in which your channels
a re stored fo l l owing initial installation.You can exchange a channel fro m
i t ’s current position to an alternative position.
æ Within the getting started menu,press to select change channel
numbers.A menu with a complete list of channels currently available
is displayed.
 To move a channel to an alternative location,firstly highlight the
channel using the xy keys and press to select.
ê Now select the new channel location using the xy keys to highlight
the channel number where you want to move the channel to.
® Press the key to move the channel to it’s new location.
† Repeat operations  to ® to move further channels or press the
EXIT key to return to a normal TV picture.