Information for users in the UK {Not applicable outside the UK) Service for you Your color television has hen designed and manufactured to the highest standards, and subject to rigorous testing. Provided It Is properly operated and maintained it will perform wile for many years, However, we all know that in such complex equipment components can sometimes fall. The algal responsibility for meeting any in-guarantee service needs for your receiver rests with the dealer from whom you bought it.
Installation In addition to the Operating Instructions, a remote control and 2 batteries are supplied in a separate packaging with this TV. Introduction The easiest way to [darn how to use this TV is to perform the operations described in the order shown. Important The drawings in the text are accompanied by figures, e.g. MR These correspond to the figures on the fold-out flap. This enables you to easily find the corresponding buttons on the TV and remote control.
SEARCH STORE X Qm @0 EXTERNAL 8P @ 0O PROGRAM D+ P SEARCH STORE EX. Stunning to a TV station # Press button B and release immediately. bars” will appear In the window to indicate on which band the stations are heeling searched for. Hi= f Viy R *bar = Nonvoting UK} bars VHF I {not in UK} bars = UHF At the same time the digits 110 8 {marking the beginning to the end of the band) indicate the position where one is searching on the band.
Operating the TV Switching On/Off To switch on: * Press button @. A programmer number appears in the window. To switch off ® Press button © again. Selecting the required programmer number # Select the required programmer number with the digit buttons. ® Press button -~ for programmer numbers containing two digits. To return to single-digit programmer numbers: * Press hut ion *again.
PROGRAM VOLUME + A BRIGHT, SAT. @+ @ SEARCH STORE EX, Qm @O EXTERNAL PP 6= 6o Operating the TV without remote control To do this, press the plus + or minus — side of the relevant buttons: Programmer selection P Volume 1 Brightens: Go lour saturation @ Button {) The personal preference setting of picture and sound can be cached up by pressing the bunion, Teletext important! This applies only to TV sets equipped for Teletext. Teletext is an information system that displays text on your TV screen.
select double height ext # Press the button for the top half of the information page to be displayed in double height text. # Press the <4 button for the bot torn half of the information page to be displayed in double height text. * Press the button again for the full page of normal height text. To reveal ‘concealed’ information {Sometimes a Teletext page contains concealed information, for example ina quiz or puzzle.} ® Press the ? button.
To ‘fast’ select Teletext pages {Sometimes & page of Teletext information can be selected quickie) # The next sequential page of Teletext information can be selected by pressing the RED button (e.g. page 101 can be selected after page 100}, or, The subject-heading for the information may have a particular color, or can be placed inside a colored box. « Press an appropriate RED, GREEN, YELLOW or BLUE button. To exit Teletext » Press the (O button.
Video Recorder {intended for most Video Recorders in aur range) L Installation Connection via aerial cable & Connect the TV aerial cable to input I on the Video Recorder. & Connect the cable supplied with the Video Recorder to output TV on the Video Recorder and aerial input T on the TV, Connection via Euro connector if required, you may also connect a Educable. Consult your dealer for the correct Euro cable.
Technical information Euro connector = The specification of the Connector is as follows: Pin 1 audio output {connected to pin 8} 8.3 Arms/ < 1 ohm 2 audio Input {contact to pin 8} 0.5 Firms/ > 10 ohms 8 audio output 0.5 Sims/ <1 ohm 4 earth connection for audio 5 earth connection B input 8 audio Input 0.5 Arms/ > 10 ohms 7 Lilliput 0.7 Vop/75 ohms 8 remote control signals + status input > 10 ohms 9 earth connection G input 10 not connected 11 Gen put 0.
