Specifications

Directions for Use
EN 16 L03.1U AA3.
24
T
here may come a time when you want to Block All the television’s channels. Maybe
you don’t want your children to watch TV for a given time. With the Block All control, ALL available channels (including the A/V Inputs) can be set to block at the same time.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP ▲ or DOWN
▼ button until the word FEATURES
is highlighted.
3
Press the CURSOR RIGHT  but-
ton to display the FEATURES menu options.
4
Press the CURSOR UP ▲ or DOWN
▼ button until the words AutoLock are highlighted.
5
Press the CURSOR RIGHT  but-
ton.
6
Enter the correct access code num-
ber. “XXXX” shows on the Access Code display as you press the NUM- BERED buttons. AutoLock menu options will be displayed.
7
Press the CURSOR UP ▲ or DOWN
▼ buttons until the words BLOCK
ALL are highlighted.
8
Press the CURSOR RIGHT  but-
ton to turn Block All ON or OFF. When ON is selected, ALL available channels will be blocked.
9
When finished, press the
STATUS/EXIT button to remove the menu from the screen.
H
OW TO
B
LOCK
A
LL
C
HANNELS AT THE
S
AME
T
IME
VOL
Features
AutoLock Format
Access Code XXXX
Features
AutoLock Format
Access Code - - - -
3 5 8
2 4 7
1
2 4 7
6
9
Main
Picture Sound Features Install
Brightness Color Picture Sharpness Tint More...
Main
Picture Sound Features Install
AutoLock Format
Features
AutoLock Format
Timer Start Time Stop Time Channel Activate Display
AutoLock
Block Channel Setup Code Clear All Block All Movie Rating TV Rating
Off
Channel 12 Blocked By AutoLock Channel Blocking Access Code - - - -
AutoLock
Block Channel Setup Code Clear All Block All Movie Rating TV Rating
On
If you tune to a blocked channel and enter your Access Code to view the channel, ALL blocked channels will be viewable until the TV has been turned off. When the TV is powered back ON, the previously blocked channels will be blocked again.
H
ELPFUL
H
INT
NOTE: The 0,7,1,1 access code shown on this page is the default code or a way to reset the code when the current access code is not known.
Enter your Access Code to
view a tuned channel that is
blocked with Block Channel.
23
A
fter blocking specific channels there may come a time when you want to clear all
the channels so they can be viewed. The fol- lowing steps explain how to CLEAR ALL blocked channels.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP ▲ or DOWN
▼ button until the word FEATURES is highlighted.
3
Press the CURSOR RIGHT  but-
ton to display the FEATURES menu options.
4
Press the CURSOR UP ▲ or DOWN
▼ button until the words AutoLock
are highlighted.
5
Press the CURSOR RIGHT  but-
ton.
6
Enter the correct access code num-
ber. “XXXX” shows on the Access Code display as you press the NUM- BERED buttons. AutoLock menu options will be displayed.
7
Press the CURSOR UP ▲ or DOWN
▼ buttons until the words CLEAR
ALL are highlighted.
8
Press the CURSOR RIGHT  but-
ton to clear all blocked channels. The Clear All option will read, “Cleared.”
9
When finished, press the STATUS
/EXIT button to remove the menu from the TV’s screen.
H
OW TO
C
LEAR
A
LL
B
LOCKED
C
HANNELS AT THE
S
AME
T
IME
VOL
Features
AutoLock Format
Access Code XXXX
Features
AutoLock Format
Access Code - - - -
3 5 8
2 4 7
1
2 4 7
6
9
Main
Picture Sound Features Install
Brightness Color Picture Sharpness Tint More...
Main
Picture Sound Features Install
AutoLock Format
AutoLock
Block Channel Setup Code Clear All Block All Movie Rating TV Rating
OffStop Time Channel Activate Display
Channel 12 Blocked By AutoLock Channel Blocking Access Code - - - -
AutoLock
Block Channel Setup Code Clear All Block All Movie Rating TV Rating
Clear ?
AutoLock
Block Channel Setup Code Clear All Block All Movie Rating TV Rating
ClearedStop Time Channel Activate Display
Features
AutoLock Format
If you tune to a blocked channel and enter your Access Code to view the channel, ALL blocked channels will be viewable until the TV is powered OFF and then turned back ON. When the TV is powered back ON, the previously blocked channels will be blocked again. CLEAR ALL will not work with the Movie and TV Ratings. These options must be reset individually.
H
ELPFUL
H
INT
NOTE: The 0,7,1,1 access code shown on this page is the default code or a way to reset the code when the current access code is not known.
The Clear All option when activated
will unblock ALL blocked channels. It
will not affect programming blocked
by the Movie or TV Rating options.
Or, enter your Access
Code to view a tuned
channel that is blocked
with Block Channel.