Specifications

Directions for Use
EN 12 L03.1U AA3.
16
C
hannel Edit makes it easy for you to ADD or DELETE channels from the list of
channels stored in the TV’s memory.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP ▲ or DOWN
▼ buttons to scroll through the on-
screen menu until the word INSTALL is highlighted.
3
Press the CURSOR RIGHT  but-
ton to display the INSTALL menu
features.
4
Press the CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the words CHANNEL EDIT are highlighted.
5
Press the CURSOR RIGHT  but-
ton to display the CHANNEL EDIT
options.
6
With the CHANNEL EDIT options
displayed, and CHANNEL NO. high- lighted; enter the channel number (with the NUMBERED or the CH + or – buttons) you wish to add (Skipped OFF), or delete (Skipped ON) from the TV’s memory.
7
Using the CURSOR DOWN ▼ but-
ton, scroll the menu to highlight the word SKIPPED.
8
Now use the CURSOR RIGHT 
button to toggle between ON or OFF. If ON is selected the channel is skipped when scrolling channels with the CH + or – buttons. If OFF is selected the channel is not skipped when scrolling channels with the CH + or – buttons.
9
When finished, press the STATUS
/EXIT button to remove the menu from the TV’s screen.
H
OW TO
A
DD OR
D
ELETE
C
HANNELS
VOL
9
2 4 7
3 5 8
1
2 4
Channel Edit
Channel No. Skipped
12
Main
Picture Sound Features Install
Brightness Color Picture Sharpness Tint More...
Main
Picture Sound Features Install
Language Tuner Mode Auto Program Channel Edit
Install
Language Tuner Mode Auto Program Channel Edit
Channel No. Skipped
Channel Edit
Channel No. Skipped
On
Channel Edit
Channel No. Skipped
Off
6 8
6
15
Y
our TV can automatically set itself for local area (or Cable TV) channels. This
makes it easy for you to select only the TV stations in your area when the CHANNEL (+), (–) buttons are pressed.
Note: Make sure the antenna or cable signal connection has been completed before AUTO PROGRAM is activated. 1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP ▲ or DOWN
▼ buttons to scroll through the on-
screen menu until the word INSTALL is highlighted.
3
Press the CURSOR RIGHT  but-
ton to display the INSTALL menu
features.
4
Press CURSOR UP ▲ or DOWN ▼
buttons to scroll the Install features until the words AUTO PROGRAM are highlighted.
5
Press the CURSOR RIGHT  but-
ton to start the Auto Program scanning of channels. Auto Programming will store all available channels in the TV’s memory then tune to the lowest avail- able channel when done.
6
When finished, press the STATUS
/EXIT button to remove the menu from the TV’s screen.
H
OW TO
A
UTOMATICALLY
P
ROGRAM
C
HANNELS
When CABLE is selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-
69 are available.
When AUTO is selected, the TV will auto-
matically set itself to the correct mode based on the type of signal it detects when the AUTO PROGRAM feature is activated.
H
ELPFUL
H
INT
VOL
6
2 4
3 5
1
2 4
Auto Program
Channel
12
Main
Picture Sound Features Install
Brightness Color Picture Sharpness Tint More...
Main
Picture Sound Features Install
Language Tuner Mode Auto Program Channel Edit
Install
Language Tuner Mode Auto Program Channel Edit
Auto Program
Channel
13
Auto Program
Channel
14