User Manual 27PT5245 Thank you for choosing Philips. Need help fast? Read your User Manual and/or Quick-Use Guide first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance you may access our online help at www.p4c.philips.com or call 1-888-PHILIPS (1-888-744-5477) while with your product. Model No.: Serial No.
Return your Product Registration Card today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment B. Objects have fallen or liquid has been spilled into the appliance; C. The appliance has been exposed to rain; D. The appliance does not appear to operate normally or exhibits a marked change in performance; E. The appliance has been dropped or the enclosure damaged. 17. Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinet design.
Table of Contents Introduction Welcome/TV Registration Safety/Precautions . . . . . . Table of Contents . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Here are a few of the special features of your new Color Television. .2 .3 .4 .
Basic Cable TV Connection T he Cable TV signal into your home may be a single cable (75 ohm) or may include a Cable Box. In either case, the connection to the TV is easy. If your Cable TV signal comes directly via a 75Ω coaxial cable, use the following steps. 1 2 Connect the Cable TV signal to the 75 OHM ANTENNA INPUT jack on the rear of the TV. Screw it down tight. Plug the TV’s power cord into a power outlet and turn on the TV. Set TV/CABLE to CABLE as detailed on page 11.
Basic Antenna Connection combination antenna receives normal A broadcast channels (VHF 2-13 and UHF 14-69).Your connection is easy since you will connect the antenna to the 75 OHM ANTENNA INPUT jack on the rear of the TV. 1 If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV. Go to step 2. If your antenna has flat twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter (not supplied with TV).
Basic TV to VCR (Accessory) Connection he basic Antenna/Cable TV to Accessory T (VCR, DVD Player, etc.) to TV connection is shown at right. For other hookups (such as DVD IN 2 OUTPUT VIDEO Y those with Cable Boxes), refer to the owner’s manual of the Cable Box or other Accessories. L Cb AUDIO R 1 2 3 4 L (MONO) R Cr Connect a yellow video cable to the VIDEO IN 2 jack on the rear of the TV and to the VIDEO OUT jack on your VCR (or other accessory).
Basic TV and Remote Control Operations Television 1 2 3 4 Press POWER to turn on the TV. Press VOL. 8 to increase the sound level. Press VOL. 9 to lower the sound level. Press CH. ;8 or CH. 9 to select TV channels. Press MENU to see the TV’s on-screen menu. In the menu, use VOL. 8/9 and CH. 8/9 to make adjustments or selections. You can press MENU on either the remote control or the front of the TV to access or remove the menu.
Remote Control STANDBY y Button MUTE Button Press to turn the TV on or off (standby). You also can turn on the TV by pressing the CH (annel) 8/9 buttons on the front of the TV. Press to cancel or restore the TV sound. Pressing the volume buttons (VOL 8/9 or VOL +/-) also will cancel mute and restore the sound. STANDBY MUTE CALL Button SLEEP Button Press to select a time period (10 minutes to 120 minutes in 10-minute increments) after which the TV will turn itself off. Details are on page 21.
Language Y ou can set the TV’s on-screen menu to be in English or Spanish. 1 2 3 4 5 6 7 Press MENU to see the menu. Press VOL + or VOL - to highlight SET. Press CH+ or CH- to highlight LANGUAGE. Press VOL + or VOL - to enter the LANGUAGE menu. Press CH+ or CH- to select ENGLISH, FRANÇAIS(French) or ESPAÑOL (Spanish). STANDBY T MUTE SLEEP CALL BOOKMARK SMART R PICTURE MTS T TV/AV Press VOL + or VOL - to confirm your selection.
TV/Cable TV I t’s important for the TV to know what type of signal - Cable TV or a normal Antenna - you are using. To tell the TV whether you are using a Cable TV signal, set TV/CABLE to TV or CABLE as follows. 1 2 3 4 PIC. SND SET TUN. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press MENU to see the menu. Press VOL + or VOL - to highlight TUN. (tuner). 50 50 50 50 0 ON CHANNEL TV/CABLE ADD/ERASE MANUAL AUTO PROGRAM 2 TV ADD UP ] Press CH+ or CH- to highlight TV/CABLE.
Auto Program (Setting TV Channels) Y ou can set your TV to receive local TV channels (from an Antenna) or Cable TV channels (when you have Cable TV service). Then, use AUTO PROGRAM to set up the channels that are available for you.This makes it easy for you to select only the available TV stations when you press CH+ or CH-. Before you start AUTO PROGRAM, connect the Antenna or Cable TV signal as detailed on pages fivesix; set TV/CABLE as described on page 11. 1 2 3 4 PIC. SND SET TUN.
Manual Channel Tuning M anual Channel Tuning lets you quickly select the next available channel. For example, if you are looking for a channel between 60 and 70, start the search at channel 60 and go up. 1 2 3 4 5 6 7 8 PIC. SND SET TUN. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press MENU to see the menu. Press VOL + or VOL - to highlight TUN. (tuner). PIC. SND SET TUN. CHANNEL TV/CABLE ADD/ERASE MANUAL AUTO PROGRAM Press CH+ or CH- to highlight TV/CABLE.
Adding or Erasing Channels Y ou can add or erase channels from the list in the TV’s memory. 1 2 3 4 5 6 12 Using the Number buttons, select the channel you wish to add or erase. PIC. SND SET TUN. Press MENU to see the menu. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press VOL + or VOL - to highlight TUN. (tuner). 50 50 50 50 0 ON Press CH + or CH- to highlight ADD/ERASE. Press VOL + or VOL - to choose ADD or ERASE.
Picture Adjustments T o adjust your TV picture, select a channel and follow the steps below. 1 2 3 4 Press MENU to see the menu. PIC. SND SET TUN. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press CH + or CH- to highlight your choice: BRIGHTNESS, COLOR, CONRAST, SHARPNESS,TINT, or BLUE BACK (background). Press VOL + or VOL - to increase or decrease the element you chose. However, you can turn BLUE BACK to only ON or OFF (see below). STANDBY Press TV/AV/EXIT to remove the menu from the screen.
SmartPicture W hether you’re watching a movie or a video game, your TV has automatic picture settings matched for your current program. SmartPicture resets your TV’s video settings for different types of programs and viewing conditions. Each SmartPicture setting is preset at the factory to automatically adjust the TV’s Brightness, Color, Contrast, Sharpness, and Tint. 1 2 PICTURE PERSONAL Press SMART PICTURE on the remote control.The current SmartPicture setting will appear on the screen.
Clock F ollow these steps to set your TV’s clock. 1 2 3 4 5 6 7 8 Press MENU to show the on-screen menu. PIC. SND SET TUN. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press VOL+ or VOL- to highlight SET. Press CH+ or CH- to highlight TIMER. 50 50 50 50 0 ON PIC. SND SET TUN. CLOSED CAPTION PARENTAL CONTROL TIMER LANGUAGE CHILD LOCK ] ] ] ] ON Press VOL+ or VOL- to display the TIMER features. STANDBY Press CH+ or CH- to highlight CLOCK SET.
On-Timer T o turn on the TV to a specific channel at a specific time, use the On-Timer. Before you begin, set the clock correctly. Details are on page 17. 1 2 3 4 5 PIC. SND SET TUN. Press MENU to show the on-screen menu. CLOSED CAPTION PARENTAL CONTROL TIMER LANGUAGE CHILD LOCK Press VOL+ or VOL- to highlight SET. ] ] ] ] ON SET TIMER OFF TIMER ON TIMER CLOCK SET ] ] ] Press CH+ or CH- to highlight TIMER, then press VOL+ or VOL-. Press CH+ or CH- to highlight ON TIMER, then press VOL+ or VOL-.
Off-Timer T o turn off the TV at a specific time every day, use the Off-Timer. Before you begin, set the clock correctly. Details are on page 17. 1 2 3 4 5 6 7 8 PIC. SND SET TUN. Press MENU to show the on-screen menu. CLOSED CAPTION PARENTAL CONTROL TIMER LANGUAGE CHILD LOCK Press VOL+ or VOL- to highlight SET. ] ] ] ] ON SET TIMER OFF TIMER ON TIMER CLOCK SET ] ] ] Press CH+ or CH- to highlight TIMER, then press VOL+ or VOL-. Press CH+ or CH- to highlight OFF TIMER, then press VOL+ or VOL-.
Closed Captions C losed Captioning (CC) lets you read the voice content of TV programs on the TV screen. Designed to help the hearing impaired, on-screen text boxes will show dialog, conversations, and activity during TV programming. 1 2 3 4 5 6 7 PIC. SND SET TUN. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press MENU to show the on-screen menu. 50 50 50 50 0 ON PIC. SND SET TUN. CLOSED CAPTION PARENTAL CONTROL TIMER LANGUAGE CHILD LOCK Press VOL+ or VOL- until SET is highlighted.
Sleep Timer H ave you ever fallen asleep in front of the TV, only to have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you that trouble by turning itself off. 1 2 Press SLEEP. The SLEEP display will appear on the screen. SLEEP: OFF Within five seconds, press SLEEP to pick the amount of time (in 10-minute increments up to 120 minutes) before the TV will turn itself off. SLEEP: 120MIN.
Understanding Parental Control S martLock processes program content advisories from broadcasters. SmartLock can respond to the content advisories and block objectionable content (offensive language, violence, sexual situations, etc.).This is a great feature to censor the type of programming children watch. SmartLock offers various blocking options from which to choose: MASTER ENABLE: This is the "master switch" for SmartLock.When ON, all blocking/censoring you have set is enabled.
Parental Control Secret Code O ver the next few pages you’ll learn how to block programs and understand the rating terms for certain broadcasts. First, set a secret code. 1 2 3 4 5 6 7 8 PIC. SND SET TUN. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press MENU to show the on-screen menu. Press VOL+ or VOL- to highlight SET. Press CH+ or CH- to highlight PARENTAL CONTROL. Press VOL+ or VOL- to display the SECRET CODE screen. 5 - Also press CH+ on the front of the TV.
Blocking Programming with Movie Ratings T here are two types of ratings for Parental Control. One is based on movie industry ratings. The other is based on TV industry ratings. Both can be used to censor programming. Let’s first look at the MPAA Rating options of Parental Control. 1 2 3 4 5 6 7 8 9 PIC. SND SET TUN. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press MENU to show the on-screen menu. 50 50 50 50 0 ON Press VOL+ or VOL- to highlight SET.
Blocking Programming with TV Ratings S ome program ratings are based on TV industry ratings as described below. 1 2 3 4 5 6 7 8 9 Press MENU to see the menu. SET PARENTAL CONTROL MPAA RATING TV PARENTAL GUIDELINES BLOCK UNRATED OFF BLOCK NO RATING OFF MASTER ENABLE OFF Press VOL+ or VOL- repeatedly to highlight SET. Press CH+ or CH- to highlight PARENTAL CONTROL. Press VOL+ or VOL- to see the SECRET CODE screen.
Parental Control Blocking Options A fter setting your Secret Code, Parental Control offers special blocking options. 1 2 3 4 5 6 Press MENU to see the menu. PIC. SND SET TUN. Press VOL+ or VOL- to highlight SET. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press CH+ or CH- to select PARENTAL CONTROL. PIC. SND SET TUN. CLOSED CAPTION PARENTAL CONTROL TIMER LANGUAGE CHILD LOCK ] ] ] ] ON Press VOL+ or VOL- to see the SECRET CODE screen.
Child Lock C hild Lock allows you to lock the buttons on the front of the TV. 1 2 3 4 5 Press MENU to show the on-screen menu. PIC. SND SET TUN. CLOSED CAPTION PARENTAL CONTROL TIMER LANGUAGE CHILD LOCK Press VOL+ or VOL- repeatedly until SET is highlighted. Press CH+ or CH- to highlight CHILD LOCK. Press VOL+ or VOL- to choose ON or OFF. Choose ON to disable all the buttons on the front of the TV. CHILD LOCK ON will appear briefly on the TV screen each time you press a button on the front of the TV.
SmartSound W hen you are watching a movie or video game, your TV has sound settings that match these programming types. 1 2 3 4 5 PIC. SND SET TUN. Press MENU to show the on-screen menu. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press VOL+ or VOL- to highlight SND (Sound). Press CH+ or CH- to highlight SMART SOUND. 50 50 50 50 0 ON PIC. SND SET TUN. 0 BALANCE SMART SOUND PERSONAL Press VOL+ or VOL- to select PERSONAL,VOICE, MUSIC, or THEATRE.
Balance Y ou can adjust the balance to increase or decrease the relative volumes of the left and right sound channels. 1 2 3 4 5 PIC. SND SET TUN. Press MENU to show the on-screen menu. COLOR BRIGHTNESS CONTRAST SHARPNESS TINT BLUE BACK Press VOL+ or VOL- to select SND (Sound). Press CH+ or CH- to highlight BALANCE. 50 50 50 50 0 ON PIC. SND SET TUN. BALANCE +10 SMART SOUND PERSONAL Press VOL+ or VOL- to adjust the balance. Press TV/AV/EXIT to remove the menus from the screen.
Stereo and Second Audio Program M ulti-channel Sound (MTS) broadcasts enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program (SAP), which broadcasters can use to transmit a second language or for other purposes. 1 CATV 6 AUTO MONO CATV 22 AUTO MONO STEREO SAP Press MTS on the remote control to select STEREO, MONO, SAP, or MONO+SAP.
Helpful Hints No Power • Check the TV power cord. Disconnect the power cord from the power outlet for 10 seconds, then reinsert the plug into the outlet. Press the STANDBY button to turn on the TV again. • Make sure the outlet is not on a wall switch. • Make sure a fuse has not blown at the power outlet. Remote Control does not work. • Check the batteries. If necessary, replace them with two AAA heavy duty (zinc chloride) or alkaline batteries.
Care and Cleaning WARNING concerning stationary images on the TV screen: Do not leave fixed images on the screen for extended periods of time.This can cause uneven aging of the picture tube. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do not leave nonmoving images on screen for extended periods of time. Do not display the same images too frequently; subtle “ghost” images can be left on the picture tube.
Glossary Audio/Video Inputs • Jacks (standard RCA) on the rear of the TV to which you connect accessory devices.These jacks receive picture and sound from equipment such as a DVD Player,VCR, Camcorder, etc. Coaxial Cable • A single solid wire normally matched with a metal plug (F-type) end connector that screws (or pushes) directly onto a 75-ohm input on the television or VCR. Menu • An on-screen list of controls available for adjustment.
PHILIPS LIMITED WARRANTY 90 Days Labor & One (1) Year Parts & Two (2) Years Display PHILIPS CONSUMER ELECTRONICS warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PUERTO RICO, OR U.S.VIRGIN ISLANDS… Contact Philips Customer Care Center at: 1-888-PHILIPS (1-888-744-5477) PROOF OF PURCHASE: You must have proof of the date of purchase to receive warranted repair on the product.
