Specifications

Mechanical Instructions

EN 9L04.6HU CA 4.

4.3.6 SP/LS Module/Panel Removal

Figure 4-8 SP/LS Module

1. Loosen the screw [1] that fixes the bracket with the

Interface module to the TV chassis, and position the

bracket in such a way that it no longer blocks access to the

SP/LS module (see Figure “Bracket with Interface

Module”).

2. Unlock the connector [1] that fixes the SP/LS module to the

chassis, and take out the SP/LS module (see Figure “SP/

LS Module”).

3. Disconnect all cables that lead to the module.

4.4 Set Re-assembly

To re-assemble the whole set, do all processes in reverse

order.

Note: before you mount the rear cover, perform the following

checks:

• Check whether the AC power cord is mounted correctly in

its guiding brackets.

• Check whether all cables are replaced in their original

position

G_16430_006.eps

210406