Specifications

Mechanical Instructions
EN 8 L04.6HU CA4.
4.3.3 ATSC Module/Panel Removal
Figure 4-4 ATSC bracket
1. Disconnect all cables that lead to the module.
2. Unlock the clip [1] at the left side of the bracket and pull out
the ATSC module [2].
3. Release the fixation clips that hold the panel [3] and take
out the panel (it hinges at the bottom).
4.3.4 EPS1B Module/Panel Removal
Figure 4-5 EPS1B Module
1. Disconnect all cables that lead to the module.
2. Unlock the clip [1] at the lower side of the bracket and pull
out the EPS1B bracket.
3. Release the fixation clips that hold the panel [2] and take
out the panel.
4.3.5 Interface Module/Panel Removal
Figure 4-6 Bracket with Interface Module
Figure 4-7 Interface Module
1. Loosen the screw [1] that fixes the bracket with the
Interface module [2] to the TV chassis, and reverse the
bracket to get access to the Interface Module (see Figure
“Bracket with Interface Module”).
2. Loosen the screw [1] in the middle of the Interface Module,
release the fixation clips (or shift the Interface Module
aside), and take it out of its bracket (see Figure “Interface
Module”).
3. Disconnect all cables that lead to the Interface Module.
F_15760_009.eps
151105
1
2
3
3
G_16430_003.eps
210406
1
22
1
G_16430_004.eps
210406
22
1
G_16430_005.eps
210406
1