Moda 279C9 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor..................7 2.3 Remove the Base Assembly for VESA Mounting............................
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours. Try to keep your eyes from eye strain while using the screen for a constant period of time by : Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off.
1. Important • “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 2 Install the base 1. In order to well protect this monitor and avoid scratching or damaging of the monitor, keep the monitor face down in the cushion for the base installation. 2. Setting up the monitor 2.1 Installation Package contents Moda 279C9 278E9 Quick Start 2. Hold the stand with both hands. (1) Gently attach the stand to the VESA mount area until the latch locks the stand. Register your product and get support at www.philips.
2. Setting up the monitor Connecting to your PC 4 USB hub To comply with International energy standards, the USB hub/ports of this display are disabled during Sleep and Power Off modes. 11 1 2 4 Connected USB devices will not work in this state. 10 6 To permanently put the USB function in “ON” state, please go to OSD Menu, then select “USB standby mode”, and switch it to “ON” state. Somehow if your monitor reset to factory setting, ensure to select "USB standby mode" to “ON” state in OSD Menu.
2. Setting up the monitor 2.2 Operating the monitor Description of the control button < Note If you Turn OFF your monitor via the power switch at any given time, all the USB ports will power OFF. Press more than 3 seconds to switch display power OFF. Press to switch display power ON Warning USB 2.4Ghz wireless devices, such as, wireless mouse, keyboard, and headphones, maybe have interference by the high-speed signal of USB 3.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Height adjustment Resolution notification This monitor is designed for optimal performance at its native resolution, 3840x2160. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 3840x2160 for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor Note 2.3 Remove the Base Assembly for VESA Mounting This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Extend the monitor base to its maximum height. 100mm 100mm 2. Place the monitor face down on a smooth surface.
3. Image Optimization 3. Image Optimization 1. Toggle to the left to launch the SamrtImage on screen display. 3.1 SmartImage 2. Toggle to the up or down to select among EasyRead, Office, Photo, Movie, Game, Economy, LowBlue Mode and Off. What is it? 3. The SmartImage on screen display will remain on screen for 5 seconds or you can also toggle to the left to make confirmation.
3. Image Optimization • • Photo: This profile combines color saturation, dynamic contrast and sharpness enhancement to display photos and other images with outstanding clarity in vibrant colors - all without artifacts and faded colors. 3.
4. AMD FreeSyncTM • AMD Radeon R7 260X • AMD Radeon R7 260 4. AMD FreeSync™ ■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. HDR 5. HDR HDR Settings in Windows10 system. Steps 1. Right click on the desktop, enter to Display settings. STEP 5 2. Select the display/monitor. 3. Adjust resolution to 3840 x 2160 Turn the “HDR and WCG” to on mode. 4. Adjust Brightness for SDR content. Note Windows10 edition is required; always upgrade to the most updated version. Note To switch off HDR function, please disable from Input device and its content. Below linkage is for the further more information from mircrosoft official website.
6. Technical Specifications 6. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio (typ.) Optimum Resolution Viewing Angle Picture Enhancement Display Colors Flicker Free Vertical Refresh Rate Horizontal Frequency sRGB LowBlue Mode AMD FreeSyncTM HDR EasyRead Connectivity Signal Input IPS Technology W-LED system 27" W (68.47 cm) 16:9 0.1554 x 0.1554 mm 1,300:1 3840x2160 @ 60Hz 178° (H) / 178° (V) @ C/R > 10 (typ.) SmartImage 1.
6. Technical Specifications Plug & Play Compatibility Stand Tilt Swivel Height adjustment Pivot DDC/CI, Mac OS X, sRGB, Windows 10/8.1/8/7 -5 / +20 degree -175 / +175 degree 130mm 90 degree Power Consumption Normal Operation Sleep(Standby) Off Heat Dissipation* Normal Operation Sleep(Standby) Off Power LED indicator Power Supply AC Input Voltage at 100VAC, 60Hz 46.0 W (typ.) 0.5 W 0.3 W AC Input Voltage at 100VAC, 60Hz 157.0 BTU/hr(typ.) 1.71 BTU/hr 1.02 BTU/hr AC Input Voltage at 115VAC, 60Hz 45.
6. Technical Specifications Environmental ROHS Packaging Specific Substances Cabinet Color Finish YES 100% recyclable 100% PVC BFR free housing Black Texture Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6. Technical Specifications 6.1 Resolution & Preset Modes Maximum Resolution 3840x2160@60Hz Recommended Resolution 3840x2160@60Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 35.16 800x600 56.25 37.88 800x600 60.32 48.08 800x600 72.19 46.88 800x600 75.00 47.73 832x624 74.55 48.36 1024x768 60.00 56.48 1024x768 70.07 60.02 1024x768 75.03 44.77 1280x720 59.86 60.
7. Power Management 7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
8. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8. Customer care and warranty 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
8. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
8. Customer care and warranty Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
8. Customer care and warranty 8.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center. For Warranty Period please refer to Warranty Statement in Important Information Manual.
9. Troubleshooting & FAQs 9. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 9.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
9. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
9. Troubleshooting & FAQs making monitor adjustments via OSD? Ans.: Simply press the button, then select 'Reset' to recall all of the original factory settings. labelled 'desktop area', move the sidebar to 3840x2160 pixels. • Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 3840x2160@60Hz. • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.
9. Troubleshooting & FAQs (e.g. digital cameras, monitors, printers, scanners, etc) after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. 3. User Define; the user can choose his/her preference color setting by adjusting red, green blue color.
2020 © TOP Victory Investment Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
