278C4 www.philips.
Table of Contents 1. Important �����������������������������������������������1 1.1 Safety precautions and maintenance ����������������������������������������������������1 1.2 Notational Descriptions ���������������������������2 1.3 Disposal of product and packing material ���������������������������������������������������������������3 1.4 Important safety information �����������������3 2. Setting up the monitor �����������������������4 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important • Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions • Humidity: 20-80% RH The following subsections describe notational conventions used in this document. Important information for Burn-in/Ghost image • • Notes, Cautions and Warnings Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic EquipmentWEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on a soft and smooth surface to avoid scratching or damaging the screen. 2.1 Installation Package contents 2. Hold the stand with both hands. (1) G ently attach the stand to the VESA mount area until the latch locks the stand. (2) U se your fingers to tighten the screw located at the bottom of the base, and secure the base to the stand tightly.
2. Setting up the monitor Connecting to your PC 2.2 Operating the monitor 6 Front view product description 6 4 5 4 3 1 DC power input 2 VGA input 3 HDMI inputs (HDMI1, HDMI2, and HDMI3) 7 4 HDMI audio output 5 Kensington anti-theft lock 6 5 4 2 Switch monitor’s power ON and OFF. 6 Ambiglow LED lights Connect to PC Access the OSD menu. Confirm the OSD adjustment. 1. Connect the power cord to the back of the monitor firmly. Adjust the OSD menu. 2.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1080 @ 60 Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
3. Image Optimization 3. Image Optimization 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. 3.1 SmartImage 4. When SmartImage is enabled, the sRGB scheme is disabled automatically. To use sRGB, you need to disable SmartImage with the button at the front bezel of your monitor. Except using key to scroll down, you can also press buttons to choose and press “OK” to confirm selection and close the SmartImage OSD.
3. Image Optimization • • Movie: Ramped up luminance, deepened color saturation, dynamic contrast and razor sharpness displays every details in darker areas of your videos without color washout in brighter areas maintaining a dynamic natural values for the ultimate video display. 3.
3. Image Optimization Installation • Follow the instruction and complete the installation. • You can launch after installation is completed. • If you want to launch later, you can either click the shortcut on desktop or toolbar. Start with Standard pane Adjust menu First launch -Wizard • The first time after installation of SmartControl Premium, it will automatically go to Wizard for first time launch. • The wizard will guide you through adjustment your monitor performance step by step.
3. Image Optimization Color menu 11 • Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage (Please refer to SmartImage section). • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input. • Example for Color Calibration.
3. Image Optimization First Color Calibration Screen • Previous button is disabled until the second color screen. • Next goes to the succeeding target (6-targets). • Finally go to File > Presets pane. • Cancel closes the UI and returns to the plug in page. SmartImage Allows user to change setting for better display setting based on content. When Entertainment is set, SmartContrast and SmartResponse are enabled. 1. "Show Me" starts color calibration tutorial. 2.
3. Image Optimization ECO menu • Does not require the display be attached to a different host to go into Theft Deterrence mode. After creating PIN, the Theft Deterrence pane will indicate Theft Deterrence Enabled and provide PIN Options button: • Theft Deterrence Enabled is displayed. • Disable Theft Deterrence Mode opens pane screen on next page. • PIN Options button only available after user creates PIN, button opens secure PIN web site.
3. Image Optimization Options>Audio - Will only be active when selecting Audio from the drop-down Options menu. A right click on the task tray icon displays the menu options for Help, Technical Support. Check for Update, About, and Exit. When Enable task tray menu is disabled, the task tray icon will only display EXIT. • On a non-supported display capable of DDC/ CI, only the Help and Options tabs are available. Run at Startup is checked (On) by default.
3. Image Optimization Help menu Context Sensitive menu Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. The Context Sensitive menu is Enabled by default. If Enable Context Menu has been checked in the Options>Preferences pane, then the menu will be visible.
3. Image Optimization The task tray has five entries: • Help - Access to User Manual file: Open User Manual file using the default browser window. • Technical Support - Displays the tech support page. • Check for Update - Takes the user to PDI Landing and checks the user’s version against the most current available. • About - Displays detailed reference information: product version, release information, and product name. • Exit - Close SmartControl Premium.
4. Ambiglow 4. Ambiglow 10 ~ 15 cm How to enable Ambiglow Ambiglow function can be selected by simply press the hotkey on the front bezel: 1. Press hotkey display. What is it? Ambiglow adds a new dimension to your viewing experience. This patented Philips technology uses two rear facing rows of bright LED’s projecting a glow of light on the surrounding wall. The innovative Ambiglow processor continuously adjusts the overall color and brightness of the light to match the on screen image.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Brightness SmartContrast Contrast Ratio (typ.) Response Time (typ.) SmartResponse Time (typ.
5. Technical Specifications Weight Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Temperature range (Non-operation) Relative humidity MTBF Environmental ROHS EPEAT Packaging Specific Substances Energy Star Compliance and standards Regulatory Approvals Cabinet Color Finish 5.44 kg 5.00 kg 8.84 kg 0°C to 40 °C -20°C to 60°C 20% to 80% 30,000 hrs YES Silver (www.epeat.
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920 x 1080 @ 60 Hz (analog input) 1920 x 1080 @ 60 Hz (digital input) Recommended Resolution 1920 x 1080 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 37.88 800 x 600 60.32 46.88 800 x 600 75.00 48.36 1024 x 768 60.00 60.02 1024 x 768 75.03 63.89 1280 x 1024 60.02 79.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Regulatory Infomation • This display is designed for both you and the planet. Restrictions on chlorinated and brominated flame retardants, plasticizers, plastics and heavy metals such as cadmium, mercury and lead (RoHS compliance). • Both product and product packaging is prepared for recycling. The display you have just purchased carries the TCO Certified label.
7. Regulatory Infomation Lead-free Product CE Declaration of Conformity Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle.
7. Regulatory Infomation Energy Star Declaration Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (www.energystar.gov) As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
7. Regulatory Infomation Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes: EN 55022 Compliance (Czech Republic Only) • Réorienter ou déplacer l’antenne de réception.
7. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
7. Regulatory Infomation EU Energy Label China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products produced and sold for China market have to meet China RoHS request. 中国电子信息产品污染控制标识要求(中国 RoHS法规标示要求)产品中有毒有害物质或 元素的名称及含量 有毒有害物质或元素 部件名称 The European Energy Label informs you on the energy efficiency class of this product.
8. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 8. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
8. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
8. Customer care and warranty 8.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country ASC Consumer care number Price Germany Siemens I&S +49 01803 386 853 € 0.
8. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center ASC Consumer care number Belarus NA IBA +375 17 217 3386 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA Renoprom +385 1 333 0974 Estonia NA FUJITSU +372 6519900 Latvia NA “ServiceNet LV” Ltd. +371 7460399 Lithuania NA UAB "Servicenet" +370 7400088 Romania NA Blue Ridge Intl. +40 21 2101969 Serbia & Montenegro NA Kim Tec d.o.o.
8. Customer care and warranty Contact Information for APMEA region: Country Call center ASC Consumer care number Australia NA AGOS NETWORK PTY LTD 1300 360 386 New Zealand NA Visual Group Ltd. 0800 657447 Hong Kong / Macau NA Smart Pixels Technology Ltd. Hong Kong:Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 India NA REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Indonesia NA PT.
9. Troubleshooting & FAQs 9. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 9.1 Troubleshooting Visible signs of smoke or sparks This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
9. Troubleshooting & FAQs Image appears blurred, indistinct or too dark • For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Adjust the contrast and brightness on On-Screen Display. An "after-image", "burn-in" or "ghost image" remains after the power has been turned off. • 9.
9. Troubleshooting & FAQs Q3. Ans.: After installing SmartControl Premium, when clicking on SmartControl Premium tab, nothing shows up after a while or a failure message shows, what happened? 9.3 Ambiglow FAQs It might be your graphic adaptor is not compatible with the SmartControl Premium. If your graphic adaptor is one of the above mentioned brands, try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver.
9. Troubleshooting & FAQs Q4. Ans.: Why sometimes Ambiglow is too bright / dark!? Please adjust intensity from OSD hot key ▲▼, and select your preference “Bright, Brighter, Brightest”. Please refer to page 8 for hotkey operation. . In the Ambiglow “Auto”, the intensity is variable and depends on the actual screen image. For example, if the movie has dark images, then the intensity will be less.
9. Troubleshooting & FAQs Q2: What is the recommended refresh rate for LCD monitor? Q7: How should I clean the LCD surface? Ans.: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Ans.: Recommended refresh rate in LCD monitors is 60 Hz, In case of any disturbance on screen, you can set it up to 75 Hz to see if that removes the disturbance.
9. Troubleshooting & FAQs Q9: Can I connect my LCD monitor to any PC, workstation or Mac? Q12: Why is my Display not showing sharp text, and is displaying jagged characters? Ans.: Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your Philips sales representative for more information. Ans.: Your LCD monitor works best at its native resolution of 1920 x 1080 @ 60 Hz.
© 2012 Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
