E line 276E9 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor..................7 2.3 Remove the Base Assembly for VESA Mounting ............................
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important screen for a constant period of time by : • If your monitor gets wet, wipe it with dry cloth as soon as possible. • Looking at something varying distances after a long period focusing on the screen. • • Conscious Blinking often while you work. • Gently closing and rolling your eyes to relax. If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord.
1. Important 1.2 Notational Descriptions that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Service The following subsections describe notational conventions used in this document. • The casing cover should be opened only by qualified service personnel. Notes, Cautions and Warnings • If there is any need for any document for repair or integration, please contact with your local service center.
1. Important Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. 1.3 Disposal of product and packing material Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. 2.1 Installation Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. Package contents E line 276E9 Quick Start Register your product and get support at www.philips.com/welcome Monitor 2. Hold the base stand with both hands and firmly insert the base stand into the base column. (1) Gently attach the base to the base column until the latch locks the base.
2.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Front view product description On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor The OSD Menu Resolution notification Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu LowBlue Mode Sub menu On Off 1, 2, 3,4 Input VGA DVI (276E9QDS/276E9QS) HDMI 1.
2. Setting up the monitor 2.3 Remove the Base Assembly for VESA Mounting 4. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4.
3. Image Optimization How to enable SmartImage? 3. Image Optimization 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance. 276E9QJA/276E9QDS/276E9QHS: 1.
3. Image Optimization • • Racing: For playing Racing games. Provides fastest response time and high color saturation. RTS: For playing RTS (Real Time Strategy) games, a user-selected portion can be highlighted for RTS games (through SmartFrame). The picture quality can be adjusted for the highlighted portion. • Gamer 1: User’s preference settings saved as Gamer 1. • Gamer 2: User’s preference settings saved as Gamer 2.
3. Image Optimization ultra-violet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. 3.
4. FreeSync • • • • • • 4. FreeSync (276E9QJA/276E9QDS/276E9QHS) AMD Radeon R9 295X2 AMD Radeon R9 290X AMD Radeon R9 290 AMD Radeon R9 285 AMD Radeon R7 260X AMD Radeon R7 260 ■■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight IPS technology W-LED system Panel Size 27” W (68.6cm) Aspect Ratio Pixel Pitch SmartContrast Optimum Resolution Viewing Angle Picture Enhancement Flicker free Display Colors 16:9 0.311 x 0.
5. Technical Specifications Stand Tilt -5° / +20° 276E9QHS Power Consumption Normal Operation Sleep (Standby) Off Heat Dissipation* Normal Operation Sleep (Standby) Off Power LED indicator Power Supply AC Input AC Input AC Input Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 24.20 W (typ.) 24.30 W (typ.) 24.40 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.5 W (typ.) <0.3 W (typ.) <0.3 W (typ.) <0.3 W (typ.
5.
5. Technical Specifications Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental ROHS Packaging Specific Substances Cabinet Color Finish 700 to 1060hPa -20°C to 60°C 10% to 90% 500 to 1060hPa YES 100% recyclable 100% PVC BFR free housing White/Black Glossy Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920x1080@60Hz (analog input) 1920x1080@60Hz (digital input) Recommended Resolution 1920x1080@60Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.02 1024x768 75.03 63.89 1280x1024 60.02 79.98 1280x1024 75.03 55.
6. Power Management 6. Power Management • Contrast: 50% • Brightness: 100% If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Three adjacent lit sub pixels (one white pixel). Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
8. Troubleshooting & FAQs 8. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 8.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
8. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
8. Troubleshooting & FAQs you first install your monitor. Follow the instructions to insert the companion CD-ROM included in this package. Monitor drivers (.inf and .icm files) will be installed automatically. Q4: How do I adjust the resolution? 8.2 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this monitor: 1920x1080@60Hz.
8. Troubleshooting & FAQs • Q11: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in LCD panels? Press "Down Arrow" to select the option "Color" then press "OK" to enter color setting, there are three settings as below. 1. Color Temperature; With settings in the 6500K range the panel appears "warm, with a redwhite color tone", while a 9300K temperature yields "cool, bluewhite toning". Ans.
8. Troubleshooting & FAQs Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: I mportant Information manual can be download on the Philips website support page.
© 2018 Koninklijke Philips N.V. All rights reserved. This product was manufactured and brought to the market by or on behalf of Top Victory Investments Ltd. or one of its affiliates. Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. Specifications are subject to change without notice.
