246E8 276E8 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor..........................5 2.1 Installation...................................... 5 2.2 Operating the monitor..................7 3. Image Optimization................................9 3.1 SmartImage.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important screen for a constant period of time by : • Looking at something varying distances after a long period focusing on the screen. • Conscious Blinking often while you work. • Gently closing and rolling your eyes to relax. • Reposition your screen to appropriate height and angle according to your height. • Adjusting the brightness and contrast to appropriate level.
1. Important Service • The casing cover should be opened only by qualified service personnel. • If there is any need for any document for repair or integration, please contact with your local service center. (Please refer to Service contact information listed in Important information manual.) • For transportation information, please refer to "Technical Specifications". • Do not leave your monitor in a car/ trunk under direct sun light. 1.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. 2.1 Installation Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. Package contents Register your product and get support at www.philips.com/welcome 246E8 276E8 2. Hold the base stand with both hands and firmly insert the base stand into the base column. (1) Gently attach the base to the base column until the latch locks the base.
2. Setting up the monitor Connecting to your PC Connect to PC 1. 2x6E8FJS： 1 2. Turn off your computer and unplug its power cable. 2 3 4 5 3. Connect the monitor signal cable to the video connector on the back of your computer. 6 3 2 4 4. Plug the power cord of your computer and your monitor into a nearby outlet. 5 1 AC/DC power input HDMI input Display port input VGA input Audio out 6 Kensington anti-theft lock 5. Turn on your computer and monitor.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Front view product description On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below: Press to switch power on.
2. Setting up the monitor The OSD Menu Resolution notification Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu LowBlue Mode This monitor is designed for optimal performance at its native resolution, 2560×1440@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 2560×1440@60Hz for best results.
3. Image Optimization 1. 3. Image Optimization Toggle to the left to launch the SamrtImage on screen display. 2. Toggle to the up or down to select among Standard, Internet, Game, LowBlue Mode. 3.1 SmartImage What is it? 3. The SmartImage on screen display will remain on screen for 5 seconds or you can also toggle to the left to make confirmation. There are multiple selections : Standard, Internet, Game, LowBlue Mode.
3. Image Optimization Studies have shown that just as ultra-violet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. 3.
4. FreeSync • • • • • • • • • • 4. FreeSync PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.” Gamers can fix tearing with a feature called “v-sync,” but the image can become jerky as the GPU waits on the monitor to call for an update before delivering new pictures.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Optimum Resolution Viewing Angle Picture Enhancement Color gamut Display Colors Flicker Free Vertical Refresh Rate Horizontal Frequency LowBlue Mode sRGB FreeSync Connectivity Signal Input Audio In/Out Input Signal Convenience Built-in speaker OSD Languages Other Convenience Plug & Play Compatibility Stand Tilt IPS Technology W-LED system 246E8: 23.8" (60.
5. Technical Specifications Heat Dissipation* Normal Operation Sleep(Standby) Off Power LED indicator Power Supply AC Input Voltage at 100VAC, 50Hz 103.4 BTU/hr(typ.) <0.853 BTU/hr <0.853 BTU/hr AC Input Voltage at 115VAC, 50Hz 105.2 BTU/hr(typ.) <0.819 BTU/hr <0.819 BTU/hr AC Input Voltage at 230VAC, 50Hz 102.5 BTU/hr(typ.) <0.922 BTU/hr <0.
5. Technical Specifications Relative humidity (Non-operation) Atmospheric pressure (Non-operation) 10% to 90% 500 to 1060hPa Environmental ROHS Packaging Specific Substances Energy Star Compliance and standards YES 100% recyclable 100% PVC BFR free housing YES Regulatory Approvals CE Mark, FCC Class B, RCM, CU, EPA, WEEE, TCO Certified, CCC, CECP Cabinet Color Finish Black / White Glossy Note 1. This data is subject to change without notice. Go to www.philips.
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920x1080@60Hz (analog input) 2560x1440@60Hz (digital input) Recommended Resolution 2560x1440@60Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 35.16 800x600 56.25 37.88 800x600 60.32 48.08 800x600 72.19 46.88 800x600 75.00 47.73 832x624 74.55 48.36 1024x768 60.00 56.48 1024x768 70.
6. Power Management 6. Power Management The following setup is used to measure power consumption on this monitor. If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
8. Troubleshooting & FAQs 8. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 8.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
8. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
8. Troubleshooting & FAQs Q5: What if I get lost when I am making monitor adjustments via OSD? Ans.: Simply press the button, then select 'Reset' to recall all of the original factory settings. tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 2560x1440 pixels. • Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 2560x1440@60Hz.
8. Troubleshooting & FAQs colors between different device (e.g. digital cameras, monitors, printers, scanners, etc) gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. 3. User Define; the user can choose his/her preference color setting by adjusting red, green blue color.
© 2017 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
