B Line 276B1 241B8 www.philips.
Table of Contents 1. Important �������������������������������������� 1 1.1 Safety precautions and maintenance ��������������������������������� 1 1.2 Notational Descriptions ������������ 3 1.3 Disposal of product and packing material ������������������������������������������ 4 2. Setting up the monitor �������������� 5 2.1 Installation ������������������������������������ 5 2.2 Operating the monitor �������������� 8 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important tilt angle maximum is exceeded, the monitor damage will not be covered under warranty. • • • panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel. Do not knock or drop the monitor during operation or transportation. • Oil-based cleaning solutions may damage the plastic parts and void the warranty. • Unplug the monitor if you are not going to use it for an extensive period of time.
1. Important Important information for Burn-in/ Ghost image • • Note Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 2. Hold the stand with both hands. (1) Gently attach the base to the stand. 2. Setting up the monitor 2.1 Installation 1 (2) Use your fingers to tighten the screw located at the bottom of the base. Package contents (3) Use a screwdriver to tighten the screw located at the bottom of the base, and secure the base to the stand tightly. B B Line Line 276B1 Quick Start Register your product and get support at www.philips.
2. Setting up the monitor 4 Connecting to your PC 1 Power Switch 2 AC power input Fast Charger 3 HDMI1 input 4 3 1 2 6 5 8 7 10 4 HDMI2 input 11 9 5 DisplayPort input 12 6 USB C 7 RJ45 input 8 DisplayPort output 9 Audio out RJ45 USB docking (USB C-C) 10 USB downstream 11 USB downstream/USB fast charger a-1 12 Kensington anti-theft lock a-2 a Connect to PC b USB C USB 1. Connect the power cord to the back of the monitor firmly. USB Type-C OR 2.
2. Setting up the monitor 2. Double click driver to install, and follow Window’s instructions to proceed with installation. powered ON at all times to be able to use this function. Some select Philips displays may not Power or Charge your device when it enters to “Sleep/Standby” mode (White power LED blinking). In that case, please enter to OSD Menu and select “USB Standby Mode”, then, turn the function to “ON” mode (default=OFF).
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification Note This monitor is designed for optimal performance at its native resolution, 2560 x 1440. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 2560 x 1440 for best results. If this display has "DPS" for ECO design, the default setting is "ON" mode: it makes the screen looks slightly dim; for optimum brightness, enter to the OSD to set "DPS" to "OFF" mode.
2. Setting up the monitor Physical Function Height adjustment Tilt 35° -5° 150mm Pivot Swivel +180° -180° 0° 0° -90° 90° Warning 10 • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Extend the monitor base to its maximum height. 100mm 100mm 2. Place the monitor face down on a smooth surface.
3. Image Optimization 3. Image Optimization 1. Press to launch the SmartImage on screen display. 3.1 SmartImage 2. Keep pressing to toggle among EasyRead, Office, Photo, Movie, Game, Economy, LowBlue Mode, Off. What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time.
3. Image Optimization • • Photo: This profile combines color saturation, dynamic contrast and sharpness enhancement to display photos and other images with outstanding clarity in vibrant colors all without artifacts and faded colors. 3.
3. Image Optimization 3.3 LightSensor What is it? Light Sensor is a unique and intelligent way of optimizing picture quality by measuring and analyzing the incoming signal to automatically adjust picture quality settings. Light Sensor uses a sensor to adjust the picture brightness depending on the room light conditions. How to enable LightSensor? 1. Press button on the front bezel to enter OSD menu screen. 2.
4. Power Delivery and Smart Power 3 Power through USB-C port: 4. Power Delivery and Smart Power 1. Connect the device to the USB-C port. You can power your compatible device with up to 90 Watts of power from this monitor. 2. Turn on [Smart Power]. 3. If [Smart Power] is on, and USB-C is used for power, then maximum power delivery depends on the brightness value of the monitor. You may adjust the brightness value manually to increase power delivery from this monitor.
5. PowerSensor™ 5. PowerSensor™ • • • • How does it work? PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect user-presence. When the user is in front of the monitor, the monitor operates normally, at the predetermined settings that the user has set- i.e.
5. PowerSensor™ returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection.
6. Daisy-chain function DisplayPort multi-streaming over USB Type-C 6. Daisy-chain function DisplayPort Multi-Stream feature enables multiple monitor connections. This Philips display is equipped with DisplayPort interface and DisplayPort over USB-C which enables daisychaining to multiple displays. PC Now you can daisy chain and use multiple monitors via a single cable from one display to the next.
6. Daisy-chain function Note The secondary monitor in the chain must support DisplayPort multistreaming, and the maximum resolution support is 2560 x 1440@60Hz.
7. Designs to prevent computer vision syndrome • Gently stretch your neck, and slowly tilt your head forward, backward, side for pain relief. 3. Ideal working posture 7. Designs to prevent computer vision syndrome (CVS) • Reposition your screen to appropriate height and angle according to your height. 4. Choose Philips monitor for easy-oneyes. Philips monitor is designed to prevent eye strain caused by prolonged computer use.
8.Technical Specifications 8. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Contrast Ratio(typ.) Optimum Resolution Viewing Angle Display Colors Flicker Free WCG Picture Enhancement Vertical Refresh Rate Horizontal Frequency sRGB LowBlue Mode EasyRead Connectivity IPS Technology LED 27" W (68.6 cm) 16:9 0.2331 (H) mm x 0.2331 (V) mm 1000:1 2560 x 1440 @ 60 Hz 178° (H) / 178° (V) @ C/R > 10 (typ.) 16.
8.Technical Specifications OSD Languages Other Convenience Plug & Play Compatibility Stand Tilt Swivel Height adjustment Pivot English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean VESA mount (100 x 100 mm), Kensington Lock DDC/CI, sRGB, Windows 10/8.
8.Technical Specifications Product without stand Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental and energy ROHS Packaging Specific Substances Cabinet Color Finish 5.47 kg 10.
8.Technical Specifications 8.1 Resolution & Preset Modes Maximum Resolution 2560 x 1440 @ 75 Hz Recommended Resolution 2560 x 1440 @ 60 Hz H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 35.16 800 x 600 56.25 37.88 800 x 600 60.32 46.88 800 x 600 75.00 48.08 800 x 600 72.19 47.73 832 x 624 74.55 48.36 1024 x 768 60.00 56.48 1024 x 768 70.07 60.02 1024 x 768 75.03 44.
9.Power Management 9. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition Power Used LED Color Yes 29.5 W (typ.) 168.6 W (max.) White No No 0.
10.Customer care and warranty of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 10. Customer care and warranty 10.
10.Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
10.
10.Customer care and warranty 10.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
11.Troubleshooting & FAQs • 11. Troubleshooting & FAQs AUTO button doesn't function • 11.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Visible signs of smoke or sparks No Picture (Power LED not lit) Make sure the power cord is plugged into the power outlet and into the back of the monitor.
11.Troubleshooting & FAQs Horizontal flicker appears damage mentioned above is not covered under your warranty. Image appears distorted. Text is fuzzy or blurred. • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
11.Troubleshooting & FAQs tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 2560 x 1440 pixels. Ans.: Simply press button, then select ‘Setup’ >'Reset' to recall all of the original factory settings. • Open 'Advanced Properties' and set the Refresh Rate to 60 Hz, then click OK. Q6: Is the LCD screen resistant to scratches? • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 2560 x 1440.
11.Troubleshooting & FAQs 2. sRGB: This is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc). "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burn-in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended.
11.Troubleshooting & FAQs Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
2021 © TOP Victory Investments Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
