273V5 www.philips.
Table of Contents 1. Important.................................................1 1.1 Safety precautions and maintenance....1 1.2 Notational Descriptions..............................3 1.3 Disposal of product and packing material.................................................................4 2. Setting up the monitor..........................5 2.1 Installation............................................................5 2.2 Operating the monitor................................7 2.
1. Important seconds before attaching the power cable or DC power cord for normal operation. 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important • • Adjusting the environment lighting similar to that of your screen brightness, avoid the fluorescent lighting, and surfaces that don’t reflect too much light. • Humidity: 20-80% RH Important information for Burn-in/Ghost image • Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: Note This icon indicates important information and tips that help you make better use of your computer system.
1. Important 1.3 Disposal of product and packing material Taking back/Recycling Information for Customers Waste Electrical and Electronic EquipmentWEEE Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation Package contents Register your product and get support at www.philips.com/welcome 273V5 Quick Start 2. Attach the base column with the monitor until it clicks into position. user s manual 使用产品前请阅读使用说明 2013 保留备用 * CD * Audio Power * VGA 3.
2.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Front view product description On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor The OSD Menu Model 273V5LHAB Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
2. Setting up the monitor Resolution notification 2.3 Remove Base Stand and Base This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1080 @ 60 Hz for best results. Remove the Base Stand Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1.
2. Setting up the monitor Note This monitor accepts a 100mm × 100mm mounting interface. 100mm 100mm Caution For use only with UL Listed Wall Mount Bracket with minimum weight/load 3.
3. Image Optimization 3. Image Optimization 3.1 SmartContrast What is it? A unique technology that dynamically analyzes displayed content and automatically optimizes an LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. Why do I need it? You want the very best visual clarity and viewing comfort for every type of content.
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Response Time (typ.) SmartResponse Optimum Resolution Viewing Angle Display Colors Vertical Refresh Rate Horizontal Frequency sRGB Connectivity Signal Input Input Signal Audio In/Out Convenience Built-in speakers TN-LCD(273V5L); MVA LCD(273V5Q) LED 27" W (68.6 cm) 16:9 0.311 × 0.
4. Technical Specifications Picture/Display Other Convenience Plug & Play Compatibility Stand Tilt Kensington Lock DDC/CI, sRGB, Windows 8/7, Mac OSX, Linux -5 / +20 273V5LHSB/273V5LHAB/273V5QHAB/273V5QHABP Power 273V5LHSB: 29.10 W (typ.), 34.26 W (max.) 273V5LHAB: 27.19 W (typ.), 34.84 W (max.) On Mode 273V5QHAB: 40.74 W (typ.), 47.59 W (max.) 273V5QHABP: 25.49 W (typ.), 28.18 W (max.) Sleep (Standby) 0.5W Off 0.
4. Technical Specifications Cabinet Color Finish Black/White Glossy/Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 2. Smart response time is the optimum value from either GtG or GtG (BW) tests.
4. Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 1920 × 1080 @ 60 Hz (analog input) 1920 × 1080 @ 60 Hz (digital input) Recommended Resolution 1920 × 1080 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 × 400 70.09 31.47 640 × 480 59.94 35.00 640 × 480 66.67 37.86 640 × 480 72.81 37.50 640 × 480 75.00 37.88 800 × 600 60.32 46.88 800 × 600 75.00 48.36 1024 × 768 60.00 60.02 1024 × 768 75.03 44.77 1280 × 720 59.86 63.
5. Power Management 5. Power Management Power Management Definition If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Active ON Yes Yes Power Used LED Color 32.53 W (typ.) 33.
5. Power Management The following setup is used to measure power consumption on this monitor. • Native resolution: 1920 × 1080 • Contrast: 50% • Brightness: 100% • Color temperature: 6500k with full white pattern Note This data is subject to change without notice.
6. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 6. Customer care and warrant Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 6.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
6. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
6. Customer care and warranty 6.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
7. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 7. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 7.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
7. Troubleshooting & FAQs • Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. For further assistance, refer to the Service contact information listed in Important information manual and contact Philips customer service representative. Image appears blurred, indistinct or too dark • Adjust the contrast and brightness on On-Screen Display. 7.
7. Troubleshooting & FAQs computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically. in the 6500K range the panel appears "warm, with a red-white color tone", while a 9300K temperature yields "cool, bluewhite toning". 2.
7. Troubleshooting & FAQs "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
© 2014 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
