272G5 www.philips.
Table of Contents 1. Important ................................................1 1.1 Safety precautions and maintenance...1 1.2 Notational Descriptions .............................2 1.3 Disposal of product and packing material ................................................................3 2. Setting up the monitor .........................4 2.1 Installation ...........................................................4 2.2 Operating the monitor ...............................5 2.
1. Important Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions Humidity: 20-80% RH The following subsections describe notational conventions used in this document. IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company. 1.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2.1 Installation Package contents 272G5 2. Hold the stand with both hands. (1) Gently attach the stand to the VESA mount area until the latch locks the stand. user s manual 使用产品前请阅读使用说明 2014 保留备用 (2) Gently attach the base to the stand.
2. Setting up the monitor Connecting to your PC Note 1. The SmartKeypad is functional for Philips 272G5DJEB, do not connect to other devices. 2. The SmartKeypad port on rear of the the 272G5DJEB display is design for SmartKeypad only. 11 10 9 12 13 1 2 3 4 5 6 7 8 13 2 3 5 5 6 4 2.
2. Setting up the monitor Description of the SmartKeypad Basic and simple instruction on the control keys You are engaged in immersive gaming. You need quick access to your favorite settings without having to take your eyes off the screen. The Philips SmartKeypad enables you to do just that. With its 2x preset buttons, it enables you to customize and save your favorite settings for gaming. It also conveniently allows you to control the menu for quick OSD access and quick select various settings.
2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 2.3 Remove the Base Assembly for VESA Mounting 2.4 MHL (Mobile High-Definition Link) introduction Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. What is it? Mobile High Definition Link (MHL) is a mobile audio/video interface for directly connecting mobile phones and other portable devices to high-definition displays. 1. Place the monitor face down on a smooth surface.
2. Setting up the monitor MHL-HDMI MHL Note 1. The port marked [MHL-HDMI] is the only port on the monitor that supports the MHL function when the MHL cable is used. Note that the MHL certified cable is different than a standard HDMI cable. 2. A mobile device with MHL certification must be purchased separately. 3. You may have to manually switch the monitor to MHL-HDMI mode in order to activate the monitor, if you have other devices already working and connected to available inputs. 4.
3. Image Optimization 3. The SmartImageGAME on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. There are six modes to select: FPS, 5DFLQJ, RTS, *DPHU , *DPHU , and Off. 3. Image Optimization 3.1 SmartImageGAME What is it? SmartImage GAME GAME SmartImage provides presets that optimize display for different types of gaming content, dynamically adjusting brightness, contrast, color and sharpness in real time.
3. Image Optimization pop up on the screen and remain on Gamer1 or Gamer3 which you selected. SmartSize 1. Panel Size v select from the hot key on the front bezel by pressing SmartimageGAME and keep pressing “ ”to select. 2. 1:1 3. Aspect Audio 1. Volume 2. Mute 3. Audio Source Color 1. Color Temperature 2. sRGB 3. User Define 2. Click “Ok” on SmartKeypad or by pressing hot key on the front bezel. 3.
3. Image Optimization Installation 3.2 SmartContrast v Follow the instruction and complete the installation. What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. v You can launch after installation is completed.
3. Image Optimization Start with Standard pane Adjust menu v Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. v You can follow the instruction and do the adjustment. v Cancel prompts user if you want to cancel installation.
3. Image Optimization Color menu v Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage (Please refer to SmartImage section). v You can follow the instruction and do the adjustment. v Refer to below table for sub-menu item base on your input. v Example for Color Calibration. 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4.
3. Image Optimization ECO menu v Previous button is disabled until the second color screen. v Next goes to the succeeding target (6-targets). v Finally go to File > Presets pane. v Cancel closes the UI and returns to the plug in page. Options menu Theft Deterrence Pane will only be active when selecting Theft Deterrence Mode from the drop-down Plug Ins menu. SmartImage Allows user to change setting for better display setting based on content.
3. Image Optimization v Enable Task Tray icon is checked (On) by default. Enable context menu shows the task tray menu for SmartControl. A right click on the task tray icon displays the menu options for Help, Technical Support. Check for Update, About, and Exit. When Enable task tray menu is disabled, the task tray icon will only display EXIT. v Minimum minutes set to 5. Slider set to 5 by default. v Does not require the display be attached to a different host to go into Theft Deterrence mode.
3. Image Optimization On a non-supported display capable of DDC/ CI, only the Help and Options tabs are available. +HOS!9HUVLRQ - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Option>Auto Pivot Help menu +HOS!8VHU 0DQXDO - Will only be active when selecting User Manual from the drop-down Help menu.
3. Image Optimization &KHFN IRU 8SGDWH - Takes the user to PDI Landing and checks the user’s version against the most current available. $ERXW - Displays detailed reference information: product version, release information, and product name. Off FPS Racing RTS Gamer1 Gamer2 ([LW - Close SmartControl. To run SmartControl again, either select SmartControl from Program menu, double-click the desktop PC icon, or restart the system.
7HFKQLFDO 6SHFLÀFDWLRQV 4. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Brightness SmartContrast Contrast Ratio (typ.) Response Time (typ.) SmartResponse Maximum Resolution Optimum Resolution Standard Resolution Viewing Angle Picture Enhancement Display Colors Vertical Refresh Rate Horizontal Frequency sRGB Connectivity Signal Input Audio In/Out Input Signal Convenience SmartKeypad TN LCD LED 27" W (68.6cm) 16:9 0.31 x 0.
7HFKQLFDO 6SHFLÀFDWLRQV Power On Mode Sleep (typ.) Off (typ.) Power LED indicator Power Supply Dimension Product with stand (WxHxD) Product without stand (WxHxD) Weight Product with stand Product without stand Product with packaging 33.52W (typ.), 63.84W(max.) 0.5W 0.3W On mode: White, Standby/Sleep mode: White (blinking) 100-240VAC, 50-60Hz 639 x 580 x 242 mm 639 x 405 x 64 mm 7.5 kg 5.1 kg 10.
7HFKQLFDO 6SHFLÀFDWLRQV 4.1 Resolution & Preset Modes Maximum Resolution: 1920x1080@ 144Hz (Dual-link DVI/ DP) Optimum Resolution: 1920x1080@ 120Hz (Dual-link DVI/ DP) Standard resolution: 1920x1080@ 60Hz(VGA, HDMI, Dual-link DVI, DP) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 60.94 640x480 119.72 37.88 800x600 60.32 46.88 800x600 75.00 76.30 800x600 119.97 48.36 1024x768 60.
5. Power Management 5. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
6. Regulatory Infomation Certified Displays: 6. Regulatory Information v Production facilities have an Environmental Management System (EMAS or ISO 14001) Lead-free Product v Low energy consumption to minimize climate impact Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.
6. Regulatory Infomation EPEAT CE Declaration of Conformity (www.epeat.net) This product is in conformity with the following standards The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. v EN60950-1:2006+A11:2009+A1: 2010+A12:2011 (Safety requirement of Information Technology Equipment).
6. Regulatory Infomation Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Energy Star Declaration Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. (www.energystar.
6. Regulatory Infomation Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière.
6. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
6. Regulatory Infomation China RoHS EU Energy Label The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request. The European Energy Label informs you on the energy efficiency class of this product.
7. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country CSP Hotline Number Price Opening hours Austria RTS +43 0810 000206 € 0.07 Mon to Fri : 9am - 6pm Belgium Ecare +32 078 250851 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center CSP Consumer care number Belarus N/A IBA +375 17 217 3386 +375 17 217 3389 Bulgaria N/A LAN Service +359 2 960 2360 Croatia N/A MR Service Ltd +385 (01) 640 1111 Czech Rep.
7. Customer care and warranty Contact Information for APMEA region: Country ASP Consumer care number Opening hours $XVWUDOLD $*26 1(7:25. 37< /7' 0RQ a)UL DP SP 0RQ a)UL DP SP 1HZ =HDODQG 9LVXDO *URXS /WG +RQJ .RQJ 0DFDX +RQJ .
7.
8. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 8. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
8. Troubleshooting & FAQs Image appears blurred, indistinct or too dark v Adjust the contrast and brightness on On-Screen Display. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. An "after-image", "burn-in" or "ghost image" remains after the power has been turned off. 8.
8. Troubleshooting & FAQs corresponding companies’ web site. Install the driver. Remove SmartControl , and re-install it once more. If it is still not working, we are sorry that the graphic adaptor is not supported. Please visit Philips website and check if an updated SmartControl driver is available. 8.3 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this monitor: 1920x1080@ 60Hz.
8. Troubleshooting & FAQs Monitor drivers (.inf and .icm files) will be installed automatically. 2. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc) Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". 3.
8. Troubleshooting & FAQs the display. Once the mobile device wakes up, the monitor’s display will wake and show the images. You may need to make sure that the correct input is selected if in between you have used or connected any other device program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
8. Troubleshooting & FAQs 8.5 Gaming FAQs 1. Can I see 3D images ? A: No, this is not 3D monitor. 2. Can I upgrade this monitor to 3D monitor? A: No, this cannot be upgraded to 3D technology. 3. Do I need special video card to achieve 144 Hz refresh rate? A: Yes, your graphics card need to have dual link DVI capability with 144Hz refresh rates and updated with the latest driver. Please refer to your card vendor directly. 4. I cannot see 144 Hz refresh rate with my DVI cable/ VGA card.
2014 © Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
