E line 271E1/272E1/ 275E1/278E1 241B8 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 4 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor................. 9 2.3 Remove the Base Assembly for VESA Mounting ...........................
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important screen for a constant period of time by : • If your monitor gets wet, wipe it with dry cloth as soon as possible. • Looking at something varying distances after a long period focusing on the screen. • • Conscious Blinking often while you work. • Gently closing and rolling your eyes to relax. If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord.
1. Important that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Service • The casing cover should be opened only by qualified service personnel. • If there is any need for any document for repair or integration, please contact with your local service center.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 275E1S 2. Setting up the monitor E line 275E1S Quick Start 2.1 Installation Register your product and get support at www.philips.com/welcome Package contents 271E1S/271E1SD/272E1SA Monitor User’s Manual 使用产品前请阅读使用说明 E line 271E1S/272E1S Contents: 20 1 9 © 278E9 User’s Manual Drivers 保留备用 t or in Ch tm es nv aut h or ized duplicatio on o n is a vio lati f ap pr in .
2. Setting up the monitor 275E1/275E1S/278E1/278E1A: Use only the AC/DC adapter model: Philips ADPC2065 27xE1 1. Install base stand Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 27xE1S 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2. (1) Hold the base stand with both hands and firmly insert the base stand into the base column.
2.
2. Setting up the monitor 278E1 Connect to PC 1. 1 2 3 4 Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 5 3. Connect the monitor signal cable to the video connector on the back of your computer. 6 4. Plug the power cord of your computer and your monitor into a nearby outlet. 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor 272E1SA/278E1A 2.2 Operating the monitor Front view product description 271E1S/271E1SD/275E1/275E1S/278E1 3 7 6 3 7 6 5 4 2 5 4 2 1 Switch monitor’s power ON and OFF. 1 Access the OSD menu. Confirm the OSD adjustment. Switch monitor’s power ON and OFF. Adjust the OSD menu. Access the OSD menu. Confirm the OSD adjustment. Adjust the speaker volume. Change the signal input source. Adjust the OSD menu. Adjust the brightness level. Return to previous OSD level.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Main menu LowBlue Mode Input Picture Sub menu On 1, 2, 3,4 Off VGA(271E1S/271E1SD/272E1SA/275E1/275E1S) DVI(271E1SD) HDMI 1.4(271E1S/271E1SD/272E1SA/275E1/275E1S) 1 HDMI 2.0(278E1/278E1A) 2 HDMI 2.
2. Setting up the monitor Resolution notification 27xE1 This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz(271E1S/271E1SD/272E 1SA), 2560×1440@60Hz(275E1/275E1S), 3840×2160@60Hz(278E1/278E1A). When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080(271E1S/271E1 SD/272E1SA), 2560×1440(275E1/275E1S) , 3840×2160(278E1/278E1A)for best results.
2. Setting up the monitor 2.3 Remove the Base Assembly for VESA Mounting 4. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 27xE1S 1. Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface.
2. Setting up the monitor Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 27xE1 1. Place the display face down on a smooth surface. Pay attention not to scratch or damage the screen. 100mm 100mm 2. Use screwdriver to loosen the screw located at the bottom of the base,and remove the base from the stand.
3. Image Optimization How to enable SmartImage? 3. Image Optimization 27xE1S 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance.
3. Image Optimization 271E1S/271E1SD/272E1SA/275E1/275E1S 278E1/278E1A • FPS: For playing FPS (First Person Shooters) games. Improves dark theme black level details. • • Racing: For playing Racing games. Provides fastest response time and high color saturation. FPS: For playing FPS (First Person Shooters) games.
3. Image Optimization smart software technology to reduce harmful shortwave blue light. • • 3.2 SmartContrast What is it? SmartUniformity: Fluctuations in brightness and color on different parts of a screen are a common phenomenon among LCD monitors. Typical uniformity is measured around 75-80%. By enabling Philips SmartUniformity feature, display uniformity is increased to above 95%. This produces more consistent and true images.
4. Adaptive Sync • • • • 4. Adaptive Sync 271E1S/271E1SD/272E1SA/275E1/275E1S AMD Radeon R9 285 AMD Radeon R7 260X AMD Radeon R7 260 ■■ Processor A-Series Desktop and Mobility APUs Adaptive Sync • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image. This is called “tearing.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight IPS Technology W-LED system Panel Size 27” W (68.6cm) Aspect Ratio 16:9 271E1S/271E1SD/272E1SA: 0.311 x 0.311 mm 275E1/275E1S: 0.233 x 0.233 mm 278E1/278E1A: 0.155 x 0.155 mm Pixel Pitch Contrast Ratio (typ.
5.
5. Technical Specifications Heat Dissipation* Normal Operation Sleep (Standby) Off Power LED indicator Power Supply AC Input AC Input AC Input Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 81.23 BTU/hr 81.57 BTU/hr 81.91 BTU/hr (typ.) (typ.) (typ.) <1.71 BTU/hr <1.71 BTU/hr <1.71 BTU/hr (typ.) (typ.) (typ.) <1.02 BTU/hr <1.02 BTU/hr <1.02 BTU/hr (typ.) (typ.) (typ.
5. Technical Specifications Off Power LED indicator Power Supply <1.02 BTU/hr <1.02 BTU/hr <1.02 BTU/hr (typ.) (typ.) (typ.) On mode: White, Standby/Sleep mode: White (blinking) External, 100-240VAC, 50-60Hz Power(278E1/278E1A) Consumption Normal Operation Sleep (Standby) Off Heat Dissipation* Normal Operation Sleep (Standby) Off Power LED indicator Power Supply AC Input AC Input AC Input Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 29.70 W (typ.) 29.80 W (typ.) 29.
5. Technical Specifications Product with packaging Operating Condition Temperature range (operation) Relative humidity (operation) Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental ROHS Packaging Specific Substances Cabinet Color Finish 271E1S: 5.61 kg 271E1SD: 5.84 kg 272E1SA: 5.85 kg 275E1S: 5.71 kg 275E1: 5.59 kg 278E1/278E1A: 6.
5. Technical Specifications 5.
6. Power Management 275E1/275E1S 6. Power Management Power Management Definition If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Three adjacent lit sub pixels (one white pixel). Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer to Warranty Statement in Important Information Manual. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
8. Troubleshooting & FAQs 8. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 8.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
8. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
8. Troubleshooting & FAQs can set it up to 75Hz to see if that removes the disturbance. Q3: What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .icm)? 8.2 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this monitor: 1920x1080@60Hz(271E1S /271E1SD/272E1SA), 2560x1440@6 0Hz(275E1/275E1S),3840x2160@6 0Hz(278E1/278E1A).
8. Troubleshooting & FAQs please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Q8: Can I change the color setting of my monitor? to connect the monitor to your Mac system. Please contact your Philips sales representative for more information. Q10: Are Philips LCD monitors Plugand- Play? Ans.: Y es, you can change your color setting through OSD control as the following procedures, • Press "OK" to show the OSD (On Screen Display) menu Ans.
8. Troubleshooting & FAQs SA), 2560x1440@60Hz(275E1/ 275E1S), 3840x2160@60Hz (278E1/278E1A). For best display, please use this resolution. Q13: How to unlock/lock my hot key? Ans.: Please press for 10 seconds to unlock/lock the hot key, by doing so, your monitor pops out “Attention” to show the unlock/lock status as shown below illustrators.(271E1S/275E1S) Ans.: To lock the OSD, press and hold the button while the monitor is off and then press button to turn the monitor on.
2019 © TOP Victory Investment Ltd. All rights reserved. This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. Specifications are subject to change without notice.
