Specifications

Mechanical Instructions

EN 7L05.1U AA 4.

4. Mechanical Instructions

Index of this chapter:

4.1 Assy/Panel Removal

4.2 Set Re-assembly

Notes:

• Only the ATSC module and deflection controller panel

disassembly are described. For other disassembly

instructions, see the Service manual for

L05U AA.

• Figures below can deviate slightly from the actual situation,

due to different set executions.

4.1 Assy/Panel Removal

4.1.1 ATSC Assy

1. Release the fixation clamp and pull the bracket backwards.

Figure 4-1 ATSC bracket

4.1.2 ATSC Module Removal

1. Disconnect all cables that lead to the module.

2. Unlock the clip at the left side of the bracket and pull out the

ATSC module.

4.1.3 ATSC Panel Removal

Figure 4-2 ATSC Module Top Shield Removal

Figure 4-3 ATSC Panel Removal

1. Unscrew the shield mounting screws [1] and lift the top

shield.

2. Unscrew the ATSC panel mounting screws [2] and take out

the ATSC panel.

4.1.4 Deflection Control Panel

1. Remove all cables.

2. Pull the panel upwards out of the connectors.

4.2 Set Re-assembly

To re-assemble the whole set, do all processes in reverse

order.

Note: before you mount the rear cover, perform the following

checks:

• Check whether the AC power cord is mounted correctly in

its guiding brackets.

• Check whether all cables are replaced in their original

position

F_15060_041.eps

180305

F_15060_042.eps

180305

F_15060_043.eps

180305