Specifications

Mechanical Instructions
EN 5LC4.31E AB 4.
4. Mechanical Instructions
Index of this chapter:
4.1 Assy/Panel Removal
4.2 Set Re-assembly
Notes:
• Figures below can deviate slightly from the actual situation,
due to the different set executions.
• Follow the disassembling instructions in described order.
• Only information that is related to the IBO Zapper module
is published in this manual. For the other information, see
the relevant chassis manual (order code on front page).
4.1 Assy/Panel Removal
4.1.1 IBO Zapper Module (26” and 32”)
Figure 4-1 IBO zapper module (26” and 32”)
1. Disconnect the cable [1] from connector 1301 on the IBO
zapper module.
2. Disconnect the flatcable [2] from connector 1500 on the
IBO zapper module and remove the tape which secures it
to the IBO zapper module.
3. Disconnect the antenna cable [3] from the tuner on the IBO
zapper module.
4. Remove the torx screws [4] and remove the IBO zapper
module from the TV set.
4.1.2 IBO Zapper Module Front Panel (26” and 32”)
Figure 4-2 IBO zapper module front panel
1. Remove the two screws [1].
2. Remove the front panel by shifting it sideways to unlock it.
4.1.3 Unlocking the metal cover of the IBO zapper module (26”
and 32”)
Figure 4-3 Unlocking the metal cover of the IBO zapper module
(26” and 32”)
Figure 4-4 Opening the IBO zapper module (26” and 32”)
1. Unlock the metal cover with a screwdriver (see Figure
“Unlocking the metal cover of the IBO zapper module (26”
and 32”)”).
2. Unhook the metal cover from its hinges (see Figure
“Opening the IBO zapper module (26” and 32”)”) and
remove the cover (this is possible only if the front panel has
been removed first).
F_15270_087.eps
310505
1
4
2
3
F_15270_088.eps
300505
1
F_15270_089.eps
300505
F_15270_090.eps
300505