Specifications
Table Of Contents
- Colour Television
- 1. Technical Specifications, Connections, and Chassis Overview
- 2. Safety Instructions, Warnings, and Notes
- 3. Directions for Use
- 4. Mechanical Instructions
- 5. Service Modes, Error Codes, and Fault Finding
- 6. Block Diagrams, Test Point Overviews, and Waveforms
- 7. Circuit Diagrams and PWB Layouts
- IBO Zapper Panel: MOJO
- IBO Zapper Panel: Flash Memory
- IBO Zapper Panel: Power Supply
- IBO Zapper Panel: Interface
- IBO Zapper Panel: Analog Back End
- IBO Zapper Panel: Front End
- IBO Zapper Panel: Common Interface
- Layout IBO Zapper Panel (Overview Top Side)
- Layout IBO Zapper Panel (Part 1 Top Side)
- Layout IBO Zapper Panel (Part 2 Top Side)
- Layout IBO Zapper Panel (Part 3 Top Side)
- Layout IBO Zapper Panel (Part 4 Top Side)
- Layout IBO Zapper Panel (Overview Bottom Side)
- Layout IBO Zapper Panel (Part 1 Bottom Side)
- Layout IBO Zapper Panel (Part 2 Bottom Side)
- Layout IBO Zapper Panel (Part 3 Bottom Side)
- Layout IBO Zapper Panel (Part 4 Bottom Side)
- 8. Alignments
- 8.1 General Alignment Conditions
- 8.2 Hardware Alignments
- 8.3 Software Alignments
- 8.3.1 ADC Gain and Grey Scale Alignment
- Table 8-1 ADC gain and grey scale alignment
- 8.3.2 Panel Size Settings
- 8.3.3 Options
- 9. Circuit Descriptions, Abbreviation List, and IC Data Sheets
- 10. Spare Parts List
- 11. Revision List
Technical Specifications, Connections, and Chassis OverviewEN 3LC4.31E AB 1.- 37PF7521D/10 : 111.4 x 61.8 x 10.3- 42PF7421D/10 : 124.9 x 69.7 x 12.8Weight (kg):- 26PF5521D/10/12 : 13.3- 32PF5521D/10/12 : 18.9- 37PF5521D/10 : 25.1- 26PF7521D/10 : 13.0- 32PF7521D/10 : 19.2- 37PF7521D/10 : 25.9- 42PF7421D/10 : 321.2 Connection OverviewNote: The following connector colour abbreviations are used(acc. to DIN/IEC 757): Bk= Black, Bu= Blue, Gn= Green, Gy=Grey, Rd= Red, Wh= White, and Ye= Yellow.1.2.1 Rear ConnectionsFigure 1-1 Rear I/O (26” and 32”)Figure 1-2 Rear I/O (37” and 42”)CI Common Interface: PCMCIA68p- See diagram K7 jkS/PDIF Cinch: OutBk - Coaxial 0.2 - 0.6 VPP/ 75 ohm kqService connector (UART)1 - UART_TX Transmit k2 - Ground Gnd H3 - UART_RX Receive jG_16220_020.eps090206G_16220_021.eps090206
- 8.3.1 ADC Gain and Grey Scale Alignment










