Specifications

19
English
Français
Español
Italiano
Deutsch
Suomi
Svenska
Satellite receiver, decoder,CDV, games, etc.
Carry out the connections shown opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to
EXT1, and the equipment which produces the
S-VHS signals (S-VHS and Hi-8 video recorders, certain DVD
drives) to EXT2 and all other equipment to either EXT1 or
EXT2.
To select connected equipment
Press the AV key to select EXT1, EXT2/S-VHS2 (S-VHS
signals from the EXT2 socket).
Make the connections as shown opposite.
With the AV key, select AV/S-VHS3.
For a mono set, connect the sound signal to the AUDIO L (or
AUDIO R) input.The sound automatically comes out of the left
and right speakers of the set.
Headphones
When headphones are connected, the sound on the TV set
will be cut.The VOLUME -/+ keys are used to adjust the
volume level. The headphone impedance must be between 32
and 600 Ohms.
Amplifier
To connect to a hi-fi system, use an audio connection cable
and connect the television’s “SPDIF” output to a “DIGITAL
IN” input on the amplifier (amplifier with coaxial digital
input).
Common interface
A common interface is available to connect a CAM
(conditional access module) and a smartcard. Please contact
your service provider to get more information about these
modules.
Note : the television should always be switched off before any
module is inserted in the common interface slot.
Connecting peripheral equipment
Amplifier connection
SPDIF
CI
DATA
SPDIF
CI
DATA
Common interface
Side connections
Other equipment
iDTV 19141 Eng 17/4/05, 3:13 PM19