Specifications

Tips

PC and PIP modes

don’t work?

Standby

• Check that you have conﬁgured the computer on a compatible display

resolution (refer to page 15).

• If the set receives no signal for 15 minutes, it automatically goes into

standby mode. To save power, your set is ﬁtted with components that

give it a very low power consumption when in standby mode (less than 1 W).

• Only use a clean, soft and lint-free cloth to clean the screen and the

casing of your set. Do not use alcohol-based or solvent-based products.

• Disconnect the mains plug of the TV for 30 seconds then reconnect it.

• If your TV set breaks down, never attempt to repair it yourself: contact

your dealer’s after-sales service.

26PF5320

Visible screen size 660 mm

Audio Output : 2 x 5 W RMS

TV System NTSC M (3.58 – 4.5)

NTSC (4.43 – 5.5)

PAL B/G

PAL D/K

PAL I

SECAM B/G

SECAM D/K

SECAM K1

Playback System NTSC 3.58, NTSC 4.43, PAL 60

Set Dimensions with stand:

Width 804.5 mm

Depth 222 mm

Height 477 mm

Net Weight of set with 16 kg

stand (approximate )

Note

For Operating Voltage, Frequency, Power Consumption and Version Number, refer to the

type number at the rear of the set.

Specifications

Cleaning the set

Still no results?