Quick Start Guide
1 How to use this guide The purpose of this Quick Start Guide is to assist you in getting this Philips Commercial television installed as quickly as possible. It contains the necessary information needed for most typical connections and installations. For detailed documentation of additional features, please consult the user manual or online help at www.philips.com/professional.
2 What you can find in the box 42” model 26” / 32” models x4
3 Installing TV Programmes A Insert the aerial plug into the wall socket and the mains power cord into the power outlet. AC in HDMI 1 HDMI 2 EXT 4 EXT 3 To wall socket To power outlet B Slide the button on the remote control to the SETUP position. C Power on the TV.
...... Installing TV Programmes D Press the M button on the remote to display SETUP menu and press the Cursor Down button repeatedly until PROGRAM INSTALL is highlighted. Press the Cursor Right button to access the PROGRAM INSTALL menu and perform the installation of the TV channels. E Refer to “Changing the settings of a channel” section in this guide.
4 Changing the settings of a channel A Note: This section is only applicable after channels have been installed in the TV (refer to Section 3 on “Installing TV Programmes” ). B Press the Cursor Right button to enter into the PROGRAM INSTALL menu and use the Digit 0 - 9 buttons to select a programme number. PROGRAMINSTALL INSTALL CHANNEL PROGRAM NO. TV 1 INPUT TUNER SYSTEM WEST EU FREQUENCY 559 .
5 Configuring the Volume / Picture and Other Common settings A Press the M button on the remote to display the SETUP menu and press the Cursor Down button repeatedly until CONFIGURATION is highlighted. SETUP LANGUAGE COMMUNICATION NO. OF PROGRAMS PROGRAM INSTALL CONFIGURATION CLOCK SETUP ENGLISH > > > > > B Press the Cursor Right button to enter into the CONFIGURATION menu.
..... Configuring the Volume / Picture and Other Common settings D In the CONFIGURATION menu, select PICTURE / SOUND. Press the Cursor Left or Right button to enter the PICTURE / SOUND menu and change to your desired picture and sound settings. PICTURE / SOUND BRIGHTNESS COLOUR CONTRAST SHARPNESS TINT ACTIVE CONTROL TREBLE BASS BALANCE AVL 45 38 70 50 36 YES 52 E In the CONFIGURATION menu, select CONTROL.
6 Cloning the TV configuration to a SmartLoader and the SmartLoader configuration to the TV A B Slide button up on the left of the SmartLoader to the position. Aim SmartLoader at green LED (5 to 15 cm away from TV). Press the MENU button on SmartLoader to display menu on TV. SMARTLOADER SMARTLOADER TO TV TV TO SMARTLOADER MENU C > MENU D To load the TV configuration into a SmartLoader, select “TV to SmartLoader” and press the Cursor Right button to start.
7 Installing a System SmartCard or System Box A Note : Ensure that the TV is turned off. For the System SmartCard, insert the SmartCard into the SmartCard slot on the rear of the TV (available for certain models only) and connect the other cables as directed by the System provider. After SmartCard has been inserted and the cables connected, turn on the TV. B Note:The default setting in the Communication menu is OFF.
..... Installing a System SmartCard or System Box C In the CONFIGURATION menu, select FEATURES and press the Cursor Right button to enter the FEATURES menu. Press Cursor Down button and select LOW POWER STANDBY. Press the Cursor RIGHT button to select NO. Note: For the System SmartCard or System Box to function, NO must be selected.
8 Diagnosing Basic Problems If the TV does not seem to communicate with the external interactive terminal, do the following steps. A Press the RECALL button on the remote (in Setup position). Item 08 of the menu should read COMMUNICATION SP - I2C ONLINE. 01 02 03 04 05 06 07 08 09 26HF7875 / 10 SV1A0707100003 IC7E1 - 0 . 18 LC71HEL1 - 0 .
..... Diagnosing Basic Problems C If you are installing a System SmartCard, you must select YES in the ENABLE CARD SLOT option to enable System Card functions. D In the COMMUNICATION menu, press the Cursor Down button repeatedly until ENABLE CARD SLOT is highlighted. Press Cursor Down button and select LOW POWER STANDBY. Press the Cursor Right button to select YES (if applicable). Press the Cursor RIGHT button to select NO. Press the Cursor Up button to select STORE.
© 2007 Koninklijke Philips N.V.
