Register your product and get support at www.philips.
Contents 1 2 3 4 5 6 EN Important 3 Safety Care Legal Sustainability Help and support 3 4 5 6 7 Use your TV TV controls Watch TV View program guide Play multimedia files Interactive TV 9 9 10 13 14 15 Use more of your TV 16 Play games Set locks and timers 16 16 Change your TV settings 18 Picture and sound Channels Language settings Universal access settings Other settings Update software Reset all 18 19 21 22 22 22 23 Connect your TV 24 About cables Connect antenna Connect devices C
Safety Precautions Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilled on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips TV Consumer Care to have the TV checked before use.
Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children: • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the surface. • Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. • Educate children about the dangers of climbing on furniture to reach the TV.
Your TV is equipped with a Kensington security slot at the base of the TV. To secure the TV, purchase a Kensington anti-theft lock (sold separately). Legal Notice 2014 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliated companies, further referred to in this document as TP Vision, which is the manufacturer of the product. TP Vision is the warrantor in relation to the TV with which this booklet was packaged.
Trademarks and copyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Manufactured under license from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Energy efficiency This TV is designed with energy-efficient features. To access these features, press the Green button on the remote control. • Energy saving picture settings: You can apply a combination of energy saving picture settings. While you watch TV, press the Green button and select [Energy saving]. Then select the [Energy saving] picture setting. • Screen off: If you only want to listen to audio from the TV, you can switch off the TV display. Other functions continue to operate normally.
Help and support Visit Philips website For more information, visit the Philips support website at www.philips.com/support.
English 2 Use your TV TV controls Sensors and indicators 1. Standby indicator LED and remote control sensor The standby LED indicates when your TV is in standby. Point the remote control at the sensor. Make sure that the line of sight between the remote control and the TV is not blocked. 7. SOURCES: Watch a connected device. (Home): Access the Home menu. 8. 9. OK: Confirm an entry or selection. 10. EXIT: Exit from menus or TV functions to watch TV. (Navigation buttons): Navigate 11.
Watch TV Switch TV on or off 17. 18. 19. +/- (Volume): Adjust volume. (Mute): Mute or restore audio. +/-: Switch channels. 20. 0-9 (Numeric buttons): Select TV channels or enter text. 21. CC (Closed captions): Switch on or off closed captions. For programs that support closed captions. 22. . (Dot): Enter digital sub-channels. EasyLink controls If you connect your TV to HDMI-CEC enabled devices, such as a Blu-ray player or home theater, you can control them at the same time with one remote control.
Adjust TV volume Increase or decrease the TV volume • Press +/- on the remote control. Mute or restore the TV volume on the remote control to • Press mute the volume. • Press again to restore the volume. Adjust headphone volume 1. Press . 2. Select [Setup] > [TV settings] > [Sound] > [Headphone volume], then press OK. 3. Select a level. Switch TV channels • • Press +/- on the remote control. Press the Numeric buttons to enter a channel number.
Switch between antenna and cable channels You can switch between antenna and cable channels. 1. While you watch TV, press . 2. Select [Setup] > [Channel settings] > [Channel installation] > [Antenna connection]. 3. Select [Antenna] to watch antenna channels or [Cable] to watch cable channels, then press OK. Rename channels When you select a channel, its name appears. You can change this channel name. 1. While you watch TV, press LIST. The channel list is displayed. 2.
Change picture format You can change the picture format to suit the video source. 1. Press FORMAT. 2. Select a picture format, then press OK. The available picture formats depend on the video source: • [Auto fill]: Adjust the picture to fill the screen (subtitles remain visible). Recommended for minimal screen distortion but not for HD or PC. • [Auto zoom]: Enlarge the picture to fill the screen. Recommended for minimal screen distortion but not for HD or PC.
Play multimedia files What you can do You can play videos, photos, and music on your TV from a USB device connected to the TV. Play files from USB device If you have photos, videos or music files on a USB storage device, you can play the files on TV. Caution: • Do not overload the USB port. If you connect a USB storage device that consumes more than 500mA power, make sure that it is connected to its own external power supply. Browse USB device 1. Connect the USB device to the USB connector on the TV.
Interactive TV English Music options While you play music, press OPTIONS, then press OK to select an option: • [Repeat]: Select [Play once] to play all of the music files once. Select [Repeat] to play all of the music files repeatedly. • [Shuffle]: Enable or disable random play of tracks. • [Show info]: Display the music information. • [Eco settings]: Adjust to save energy. Note: To view information about a song (for example, title, artist or duration), select the INFO.
3 Use more of your TV Play games What you can do On this TV, you can play regular games in full-screen with optimized picture settings for games. What you need • Connect your game console to this TV. See Connect your TV > Connect devices > Game console (Page 27). Start gaming 1. Press SOURCES. 2. Select the game console, then press OK. 3. If needed, load a game disc on the game console, then select a game to play. 4. Follow the onscreen instructions to start gaming.
Sleep timer You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch off your TV earlier or reset the sleep timer. 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [Sleep timer]. 3. Select the sleep timer duration. The sleep timer can be set up for to 180 minutes. To switch off the sleep timer, set it to zero minutes. 4. Press OK to activate the sleep timer. After the specified time, the TV switches to standby.
4 Change your TV settings • Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Continue], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. • More picture settings You can change the settings in the Picture menu. 1. Press .
Audio format You can change the settings in the Sound menu. 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to change, then press OK. • [Sound style]: Access predefined sound settings. • [Restore style]: Restore the last-selected predefined sound setting. • [Bass]: Adjust the bass level of the speaker and headphones. • [Treble]: Adjust the treble level of the speaker and headphones. • [Surround mode]: Select a surround sound mode to enhance your audio experience.
6. Select [Start], then press OK. 7. Once the channel search is complete, select [Finish], then press OK. LIST to see the channel list. Tip: Press Note: When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename these channels. Install digital channels If you know the channel frequency of the channels you want to install, you can search and store digital channels one by one. For best results, contact the service provider. 1. Press . 2.
Language settings Menu language Note: If you have selected [Alternate audio] for analog channels, select between: • [Main]: Primary audio language or • [SAP]: Secondary audio language English Step 3: Copy channels to a TV with pre-installed channels 1. Switch on the second TV, on which you want to copy the channel list. 2. Press . 3. Select [Setup] > [Search for channels] > [Reinstall channels], then press OK. The country menu is displayed. 4.
Universal access settings Update software Switch on Check version Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired. You can switch these features on or off. 1. Press . 2. Select [Setup] > [TV settings] > [General settings]. 3. Select [Universal access] > [On] or [Off], then press OK. 1. Press . 2. Select [Setup] > [Software settings] > [Current software info], then press OK.
Reset all You can reset all picture and sound settings and reinstall all TV channels on your TV. 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [Reinstall TV], then press OK. 3. Follow the onscreen instructions. EN 23 English 6. For Internet Explorer: Using a file archiver, extract autorun.upg from the downloaded ZIP file. Do not copy or place the extracted file into a folder. 6. For Safari: When the download is complete, autorun.
5 Connect your TV About cables CVBS CVBS only transmits video. For sound, also connect to Audio Left/Right. CVBS connections provides standard picture quality. Cable quality Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better. The connections shown in this user manual are recommendations only. Other solutions are possible.
English Connect antenna Connect the antenna to the TV. Connect devices Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. Connect the disc player with a composite cable (CVBS) and an audio L/R cable to the TV.
TV receiver Connect the digital TV receiver with an antenna cable to the TV. Connect the satellite or digital TV receiver with an HDMI cable to the TV. Connect the digital TV receiver with a composite cable (CVBS) and an audio L/R cable to the TV.
Video recorder English Connect the recorder with an antenna cable to the TV. Connect the recorder with a composite cable (CVBS) and an audio L/R cable to the TV. Game console Connect the game console with an HDMI cable to the TV.
Connect the game console with a composite cable (CVBS) and an audio L/R cable to the TV. Home theater Connect an HDMI-ARC compliant home theater with an HDMI cable to the TV. Connect the home theater with an HDMI cable and a coaxial audio cable to the TV.
English Connect the home theater with a composite cable (CVBS) and an audio L/R cable to the TV. Digital camera Connect the digital camera with a USB cable to the TV. Digital camcorder Connect the digital camcorder with an HDMI cable to the TV.
Connect the digital camcorder with a composite cable (CVBS) and an audio L/R cable to the TV. Connect more devices USB storage device Connect the USB hard drive with a USB cable to the TV. Connect the USB flash drive with a USB cable to the TV.
Computer English Connect the computer with an HDMI cable to the TV. Connect the computer with a DVI-HDMI cable and an audio cable to the TV. Connect the computer with a VGA cable and an audio cable to the TV.
Watch connected devices Set up EasyLink devices Select a device What you can do Before you can watch a device, connect the device to the TV. See Connect your TV > Connect devices (Page 25). Select a device with SOURCES 1. Press SOURCES. 2. Select a device, then press OK. Select a device from Home menu 1. Press . 2. Select [Source], then press OK. 3. Select a device, then press OK. You can get the most out of your HDMI-CEC-compliant devices with Philips EasyLink enhanced control features.
What you need • Connect a HDMI-CEC compliant device to the TV. You can connect more than one HDMI-CEC device. See Connect your TV > Connect devices (Page 25). • Configure each HDMI-CEC compliant device properly. • Switch on EasyLink. Switch on EasyLink 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [EasyLink]. 3. Select [EasyLink] > [On], then press OK.
Note: Make sure that all HDMI-CEC settings are properly set up on the connected device. Set up TV speakers 1. Press . 2. Select [Setup] > [TV settings] > [Sound] > [Advanced] > [TV speakers]. 3. Select an option, then press OK: • [Off]: Switch off TV speakers. • [On]: Switch on TV speakers. • [EasyLink]: Switch off TV speakers, and stream TV audio to a connected HDMI-CEC audio device.
General issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Make sure that the power cable is securely connected. When you are turning the TV on, off or to standby, you hear a creaking sound from the TV chassis: No action is required. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance.
Picture issues The TV is on, but there is no picture or the picture is distorted: • Make sure that the antenna is properly connected to the TV. • Make sure that the correct device is selected as the display source. • Make sure that the external device or source is properly connected. There is sound but no picture: Make sure that the picture settings are set correctly. There is poor TV reception from an antenna connection: • Make sure that the antenna is properly connected to the TV.
Contact Philips There are problems with HDMI devices: • Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from an HDMI device. • If the TV does not recognize the HDMI device and no picture is displayed, switch the source from one device to another and back again. • If there are intermittent sound disruptions, make sure that output settings from the HDMI device are correct.
7 Specifications Power and reception Product specifications are subject to change without notice. Power • Mains power: AC 110-240 V~, 50-60 Hz • Standby power consumption: < 0.5 W • Ambient temperature: 5 to 40degree Celsius • For power consumption, see the product specifications at www.philips.com/support.
Supported audio/video formats Container .mpg .mpeg PS .vob .ts TS .ts .m2ts M2TS .mts TTS .mt2 .ts .m2ts AVCHD .mts .m4v M4V .mp4 MP4 .mkv .mk3d .asf .wmv .avi ,xvid .3gp .3g2 MKV ASF AVI 3GP Video codec Maximum resolution Max. Frame Rate (fps) Max. Bit Rate (Mbps) MPEG-1 1920x1080 25p, 30p, 50i, 60i 30 MPEG-2 1920x1080 25p, 30p, 50i, 60i 30 MPEG-4 ASP 1920x1080 25p, 30p, 50i, 60i 30 H.
Supported audio formats File Extensions Container Video codec Maximum resolution Frequency (kHz) Max. Bit Rate (Mbps) Audio codec .mp3 MP3 - - 48 384 MPEG-1,2,2.5 L3 .wma .asf WMA (V2 up to V9.2) - - 48 192 WMA .wma WMA Pro - - 96 768 WMA, WMA Pro .wav (PC) LPCM - - 192 768 LPCM LPCM - - 192 768 LPCM AAC - - 48 1024 AAC, HE-AAC (v1&v2) M4A - - 48 1024 AAC, HE-AAC (v1&v2) .alf (mac) .alff (mac) .aac .mp4 .m4a .
8 Index connect, USB device • 30 A connectivity • 40 age rating • 17 amplifier, select output • 33 audio language • 21 auto subtitle shift • 34 Auto switch off, devices • 33 C cables • 24 channel list • 11 channel list, copy • 20 channels • 11 channels, favorites • 11 channels, hide or unhide • 11 channels, install (automatic) • 19 channels, install (digital) • 20 channels, logo • 11 channels, reinstall • 23 connectivity guide • 8 connectors • 24 contact Philips • 8 content rating • 17 CVBS, composite
placement, tips • 4 G game console, connect • 27 game settings • 16 play, USB files • 14 power specifications • 38 presets, picture and sound • 12 H product support • 8 HDMI • 24 program guide, broadcaster • 13 HDMI ARC • 24 R home mode • 22 home theater, connect • 28 recorder, connect • 27 recycle • 7 I reinstall • 23 install channels, automatic • 19 remote control • 9 Interactive TV • 15 K Kensington lock • 5 rename channels • 11 rename, connected device • 32 S key beep • 22 safety • 3
English T trademarks and copyrights • 6 TV guide, broadcaster • 13 TV receiver, connect • 26 TV speakers, mute • 11 U universal access, enable • 22 USB, play files • 14 V VGA • 24 volume • 11 EN 43
All registered and unregistered trademarks are the property of their respective owners. Specifications are subject to change without notice. Philips and the Philips’ shield emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. 2014 © TP Vision Europe B.V. All rights reserved. www.philips.
