User manual

16
EN
3
Select [Start frequency (MHz) / End
Frequency (MHz)] and use the number
keys to enter
the three-digit channel
frequencies.
4 Select
[Start Search] and press OK.
5
Press (Home) Exit
.
Skipping channels
1
Press ADJUST.
2 Press Select
[TV] > [Channels]
> [Channel Edit].
» The
[Channel Edit] menu will be
displayed.
3
Press Select
the channel you wish to
skip and press OK.
Select [Skip], then press
to make the change.
4
Ifyouwishtoconrm,pleaseselect[Save]
and press OK.
5
You can skip more channels by repeating
the steps above. Press OK tostartnding
channels.
Tip
•
Use the number buttons on the remote control to access
channels that were skipped.
•
If you want to watch the channel, please repeat steps
1 to 4, thenpress OK Cancel them.
Swapping channels
1
Press ADJUST
.
2 Press Select
[TV] > [Channels]
> [Channel Edit].
» The
[Channel Edit] menu will be
displayed.
3
Press Select
the channel you wish to
swap, then press the red button.
4
Press Selectthe channel you wish to
swap,thenpresstheredbuttontoconrm.
6 Setting up
channels
Thischapterexplainshowtorecongureand
ne-tunechannels.
Setting up channels
automatically
Automaticallyndsandsaveschannels.
1
Press ADJUST.
2
Press Select [TV] > [Channels] >
[Channel Scan].
3
Press OK.
»
The TV will automatically start searching
for channels.
Updating channels
1
Press ADJUST.
2
Press Select [TV] > [Channels] >
[Update Scan]
.
3
Press OK
.
»
The TV will start to update the channels.
Setting channels manually
YoucanmanuallyndandsaveanalogTVchannels.
Finding and saving new TV channels
1
Press ADJUST.
2 Press Select
[TV] > [Channels] >
[Search for Analog Channels] .
»
The [Search for Analog Channels] menu
is displayed.