User manual

12
EN
2 Enter the password and select
[Channel
Lock].
3 Choose a channel. Press
OK to lock or
unlock the channel.
4 Repeat this step to lock or unlock multiple
channels.
•
[Channel Lock]: When channels are
locked:
•
You need to enter the four digit
password to enter the channel
blocking menu.
•
You need to enter the four
digit password to watch locked
channels.
•
You need to enter the four digit
password to enter the parental
menu.
•
[Clear All]: This function will clear all
the locked channels and signal sources
that you have previously saved.
•
The default password is
“0000”
.
Users may change or set the
password themselves.
Notes
•
If you visit a locked channel, you will be prompted to
enter the password.
Adjusting VGA
Setup
1
Press ADJUST and select [VGA setting].
»
The [VGA setting] menu will be
displayed.
2
Press Select and adjust the setup:
•
[Auto adjust]: Automatically adjusts
the TV to synchronize its resolution
with that of the PC, so that programs
are displayed in full screen.
•
[H.Position]: Adjusts the horizontal
position.
Use
timer
You can set the timer to switch the TV to standby
mode at a set time.
Tip
•
Before using the timer, please set the sleep timer.
Setting the sleep timer
Tip
•
You can turn the TV off earlier, or reset the sleep timer
before the TV switches off.
1
Press ADJUST and select [Setup].
2
Press Select [Sleep Timer]
.
3 Press You can select a time for the sleep
timer to turn the TV off.
»
The longest time that can be set for the
sleep timer is 180 minutes.
TV lock
By locking the TV remote control, you can prohibit
childrenfromwatchingspecicprogramsor
channels.
Setting or changing your password
1
Press ADJUST and select [Parental].
2
Select [Enter Password] or [Change
Password].
3
Use the number buttons on the remote
control to enter a password.
4
Create or change a password by following the
instructions on screen.
Locking channels
1
Press ADJUST and select [Parental].