Register your product and get support at www.philips.
Contents 1 Notice 2 2 Important 3 3 Your TV 5 4 Side controls and indicators 5 Sockets 5 Remote Control Functions 7 6 7 8 FAQ 14 Attention: 14 Frequently Asked Question 14 Other Information 15 Troubleshooting 15 Product information 16 Supported display resolutions 16 Multimedia 16 Use your TV 8 Switching on 8 Switching off 8 Tuner/Reception/Transmission 16 Automatic Channel Set-up 9 Remote control 16 Intelligent Channel Set-up 9 Power 16 Manual Channel Set-up
1 Notice Pixel characteristics Warranty This LCD/LED product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen.This is a structural proper ty of the display (within common industry standards) and is not a malfunction. No components are user serviceable. Do not open or remove covers to the inside of the product.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire ! Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. .
When you disconnect the power cord, always pull the plug, never the cable. Disconnect the TV from the power outlet and antenna before lightning storms. Dur ing lightning storms, never touch any par t of the TV, power cord or antenna cable. Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time.
3 Your TV Side controls and indicators PR 1 PR 2 3 4 5 1. CHANNEL UP/DOWN button Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the remote and adjust menu controls. 2. VOLUME UP/DOWN button Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote and adjust menu controls (Note: In some menus, VOLUME UP also acts like the OK button on the remote.
Headphone socket (output) This socket can be used to connect headphones or stereo earphones. or HEADPHONE Warning: Excessive sound pressure from earphones and headphones can cause hearing loss. HDMI1 and HDMI2 socket (input) The HDMI (High-Definition Multimedia Interface) socket can be used to connect a PC with a compatible video card installed, certain DVD players or a high-definition compatible digital satellite decoder.
Remote Control Functions Note: -Remote Control ( Depending on the models) and operation of remote control may be affected by bright artifical light near to the TV. Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. (On/Off button) Turns the TV on or off. TV Access the TV mode. INCR. SURR Enables Incredible Surround for stereo sources.
4 Use your TV Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries.
Automatic Channel Set-up Manual Channel Set-up Channel set-up involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified hereafter. Follow the below procedure if you find that some channels have not been stored after the automatic set-up as well as the intelligent set-up. Manual Tuning Display the menu by pressing the Menu button.
Channel Edit 5 Use more of your TV You can use this function to skip a channel or swap two channels. 1. Activate the Channel menu and press the up or down direction button to select the Channel Edit option. 2. Press the right direction or OK button to enter the Channel Edit menu. Channel Edit Current Channel Target Channel. Skip Swap 1 1 Yes ? Skipping a Channel If a channel was stored twice or its reception is poor, you can simply skip it.
Tint: adjusts the balance between the red and green levels. Note: Tint is available to be adjusted only when the system of the video signal is NTSC. button to enter, then press the up or down direction button to select an option and press the left or right direction button to adjust. Note: The EQ setting is adjusted, only when the Sound Mode is in Personal Mode. Color Temperature: adjusts the color temperature of the picture.
Language: using the left or right direction button to select your desired menu language. Note: The available languages might differ depending on the model. Color System: use the right direction or OK button to display the selectable options, then press the up or down direction button to select your desired color system and press OK to confirm. (Note: The available color system might differ depending on the model.Color system for india:PAL.
Geometry Settings Display the menu by pressing the MENU button. Press the Playing Movie: left or right direction button to select the Geometry icon and press the up or down direction or OK button to 1. Select Movie Show item, then press the right or OK display the Geometry menu. button to enter the USB device. Note: This function is only available in PC mode. 2. Press the left or right direction button to select the USB Geometry disk symbol and press the OK button to enter the selected disk.
2. Press the left or right direction button to select the USB disk symbol and press the OK button to enter the selected disk. 3. Press the up, down, left or right direction button to select your desired music file and press OK to play it. Auto Play 1. Select the Auto Play item and press right direction or OK button to enter the USB device. 2. Press the left or right direction button to select the USB disk symbol and press the OK button to Auto Play. 4.
7 Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. No picture, no sound 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3. Power plug is in a bad contact with the outlet. 4. Check the signal source. No color 1. Change the color system. 2. Adjust the saturation. 3. Try another channel. Black-white program may be received.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Multimedia Supported USB storage device: (Only FAT 16 or FAT 32 USB stor age devices are supported) Suppor ted storage file formats: Images: JPEG, BMP, PNG Audio: MP3,WMA Video: H.
Supported TV mounts To mount theTV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. TV screen size (inches) Required pitch (mm) Required mounting bolts 24PFL5555/V7 100X100 4 x M4 32PFL5355/V7 200X100 4 x M4 42PFL5555/V7 200X200 4 x M6 46PFL5755/V7 400X400 4 x M6 32PFL5355/V7 Without TV stand Dimensio n (WxHxD): 809 x 550 x 52 (mm) Weight: 9.
Consumer Guidelines 1. Kindly ensure that the dealer fills up Warranty card correctly. 2. To avail the Warranty please register your product with the Philips Logon to www.Philips.com OR Contact Philips Consumer Care Centre 3. In the unlikely event of a defect developing in the TV set contact the Philips Customer Care Centre for obtaining warranty service and inform of the defect observed in the set, the type no.and serial no.of the set. 4.
WARRANTY This TV receiver is covered under From whom the set has been purchased or warranty against any defect arising out through an Authorised Service Center for of faulty or defective material or workman warranty service. However, if the ship for a period of 12 months from the Purchaser has to shift his residence to date of purchase.
