Register your product and get support at www.philips.
Cover 2 Blank
Contents 1 Notice 2 2 Important 3 Product disposal Guidelines 3 Use your TV 4 5 4 Use more of your TV 5 Play photos, music and videos 16 on USB storage devices 9 6 Troubleshooting 18 7 Product information 21 8 Consumer Guidelines 23 9 Warranty 24 EN 1
1 Notice Pixel characteristics This LCD/LED product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. 2 EN Warranty No components are user serviceable. Do not open or remove covers to the inside of the product.
2 Important Risk of injury or damage to the TV! Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. Read and understand all instructions before you When stand mounting the TV, use only use your TV. If damage is caused by failure to the supplied stand. Secure the stand to follow instructions, the warranty does not apply. the TV tightly. Place the TV on a flat, level surface that can support the combined weight of the TV and the stand.
Low temperatures Risk of damage to the TV! • If the TV is transported in temperatures • Before you connect the TV to the power below 5°C or 41°F, unpack the TV and outlet, ensure that the power voltage wait until the TV temperature matches matches the value printed on the back room temperature before connecting the of the TV. Never connect the TV to the TV to the power outlet. power outlet if the voltage is different.
3 Use your TV Congratulations on your purchase, and welcome to Philips. To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. 3.
3.
(Standby-On) Switches the TV ON or OFF. The TV is not powered off completely unless it is physically unplugged 1 • 2 Multimedia Control buttons • Control video or music. 15 TEXT • Not applicable for 5400 series model’s. 16 • 17 • 3 • 4 • TV Access the TV mode. • LIST Access the Channel List. 5 6 7 8 SOURCE Selects connected devices. • (Navigation buttons) Navigate through menus and select items. (Also in USB mode). 18 • 19 20 Mute or restore audio.
3.4 Battery Installation 1. Remove the battery compartment door. 2. Install 2 “AAA” or UM-4 (1.5V) batteries or equivalent with the correct polarity as indicated. 3. Refix the battery compartment door.
4 Use more of your TV 4.2 Manually adjust picture setting Smart Picture Picture Contrast Sound Brightness Color 4.1 Main Menu Installation Menus help you to install channels, change picture and sound settings and access other TV features. Features Hue Sharpness Color Temperature Parental Blueback Digital Crystal Clear Pixel Precise HD 1 Press » The menu screen appears.
[Pixel Precise HD ] : 4.3 Use Smart Picture To enhance the picture quality Use smart picture to apply pre-defined picture settings. • [Flesh Tone] : Adust Flesh tone • [Noise Reduction]: Filter and reduce noise in an Image Smart Picture Vivid Smart Sound • [Dynamic contrast] : Enhance contrast. Picture Format Freeze • [Color enhancement] : Make colors more vivid and improve the details in bright colors. You can switch this feature ON or OFF.
4.6 Manually adjust sound setting Smart Sound Picture Sound Equalizer 4.7 Use Smart Sound Use smart sound to apply pre-defined Sound settings. Bass Treble Installation Balance Features Volume Smart Picture Smart Sound Speakers Picture Format AVL Freeze Parental Standard Sleep Timer 1 Press . 2 Select [Setup] > [Sound] then press OK 3 Select one of the following settings, then Press to move, and press to adjust. • [Smart Sound] : Access predefined smart sound settings.
Program Edit 4.9 Installation Menu 1 Channel No. Picture Installation Features 83.25MHZ 3 105.25MHZ 4 169.25MHZ 5 Color System Sound 48.25MHZ 2 175.25MHZ 6 203.25MHZ Sound System 7 224.25MHZ Auto Install 8 463.25MHZ 9 545.75MHZ Manual Install 10 551.25MHZ Program Edit 1 Delete Parental OK Press . 2 Select [Setup] > [Installation] then press OK 3 Select one of the following settings, then • • • • Prev./Next FAV MENU Reutrn [Channel No.
4.10 Features Menu Note 1 Press 2 Select [Setup] > [Features] then press OK 3 Select one of the following settings. then press. OK. Press to move, and press Press any key ( except Find, Text, subtitle Vol +/- and Mute) to exit 'Audio only' mode • to adjust.
[Child Lock Switch]:Make the child lock switch ON to lock the source/channel. [Change Password]: Select this option to change. the password. [Channel Block]: Select the channels to to be locked . and press ‘2’ to lock or unlock the channels. [Video Lock]: Select the sources with up/down keys on remote and press OK to set or clear lock. [Clear All]: Reset the child lock option to default value. • • • • 4.
4.17 Use Geometric Use Geometric to automatically adjust phase and Clock for VGA mode Smart Picture Smart Sound Picture Format Freeze Sleep Timer Geometric 1 Press ADJUST. 2 Select [Geometric], then press OK. This automatically adjust H & V-position, Phase and Clock for VGA mode 4.18 Use the Options menu Status Energy Saving Guide Bar Visit options relevant to current action or selection. 1 2 While you watch TV, press OPTIONS key. The TV options menu appears.
5 Play photos, music and videos on USB storage devices 5.3 View a slide show of your photos Press the following buttons to control play of selected photos.: Select photos by OK key : to play. • • to pause. • CH- or CH+ to play the previous or next photo. PHOTO MUSIC VIDEO TEXT ABC 5.4 Listen to music 5.1 Connect a USB storage device to play photos, music or videos stored on it. 1 Switch on the TV. 2 Connect the USB device to the USB port on the side of your TV.
5.7 Use the Options menu Music mode menu bar: 00:00:33/00:04:22 Status Pause FR FF Prev. Next Stop Energy Saving All Playlist 00:00:33/00:04:22 Guide Bar Info. Goto Time Visit options relevant to current action or selection. 1 While you watch TV, press OPTIONS key. » The TV options menu appears. Press to select the function icon, press OK button to confirm the function. Video mode menu bar: 00:00:33/00:04:22 AB 2 Select one of the following options, then press OK.
6 Troubleshooting 6.2 TV channel issues This section describes commonly encountered issues and accompanying solutions. Previously installed channels do not appear in the channel list: Check that the correct channel list is selected. 6.1 General TV issues 6.3 Picture issues The TV does not switch on: The TV is on, but there is no picture: Disconnect the power cable from the power Check that the antenna is properly outlet. Wait for one minute then reconnect it. connected to the TV.
6.4 Sound issues 6.7 ARC issues There is a picture but sound quality is poor: Note If no audio signal is detected, the TV automatically switches the audio output off this does not indicate malfunction. Check that all cables are properly connected. Check that the volume is not set to 0. Check that the sound is not muted. There is a picture but the sound quality is poor: Check that the sound settings are correctly set.
6.8 MHL issues 6.9 Contact us If you cannot resolve your problem, refer to the Mobile High-definition Link (MHL) is an interface FAQs for this product at www.philips.com/support. or Contact Customer Service Center. for transmitting digital audiovisual signals from mobile phones to supported television sets. Note that it works only for the MHL-enabled Phones, to confirm MHL Support in your Phone check operation manual of phone.
7 Product information 7.3 Remote control Type: RC-Z8091-800 Batteries: 2 x AAA (LR03 type) Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. 7.4 Multimedia 7.
7.6 TV mount To wall mount the TV, kit is provided in accessory bag along with TV set. Warning Follow all instructions provided with the TV mount. PE Electronics Ltd. bears no responsibility for improper TV mounting that results in accident, injury or damage. 7.7 Product specification Design and specifications are subject to change without notice. 24PFL5459/V7 : With TV stand Dimension(WxHxD): 562 x 377 x 127 (mm) Weight: 3.8 kg Without TV stand Dimension(WxHxD):562 x 329 x 49(mm) Weight: 3.
Consumer Guidelines 1.Kindly ensure that the dealer fills out warranty card correctly. 2.To avail the Warranty please register your product with the Philips• Log on to www.Philips.com OR • Contact Philips Consumer Care Centre 3.In the unlikely event of a defect developing in the TV set contact the Philips Customer Care Centre for obtaining warranty service and inform of the defect observed in the set, the type no. and serial no. of the set. 4.
WARRANTY This TV receiver is covered under warranty against any defect arising out of faulty or defective material or workman ship for a period of 12 months from the date of purchase. Should a defect develop in this set during the period of warranty, PE Electronics Limited undertakes to get the set repaired free of charge either from whom the set has been purchased or through an Authorised Service Center for warranty service.
Cover 3 Blank
1100109098 LCD/LED TV 24~20” Rev.
