226E8 246E8 276E8 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 3 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor..................7 3. Image Optimization..................... 9 3.1 SmartImage...................
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center. • Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold. • In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
1. Important 1.3 Disposal of product and packing material 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Waste Electrical and Electronic Equipment-WEEE Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings.
2. Setting up the monitor Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. 2.1 Installation Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. Package contents 226E8 246E8 276E8 使用 2. Hold the base stand with both hands and firmly insert the base stand into the base column. (1) Gently attach the base to the base column until the latch locks the base.
2. Setting up the monitor Connecting to your PC 2X6E8QJA： 2X6E8QS: 6 5 4 1 3 3 7 1 2 4 6 2 5 4 1 2 3 1 AC/DC power input AC/DC power input VGA input DVI input Kensington anti-theft lock 2 Earphone jack 3 Audio input 4 VGA input 5 HDMI input 6 Display port input 2X6E8QDS： 7 Kensington anti-theft lock Connect to PC 2 5 4 3 1 1. 6 5 2. Turn off your computer and unplug its power cable. 3 4 Connect the power cord to the back of the monitor firmly. 2 3.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Front view product description On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor The OSD Menu Resolution notification Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu LowBlue Mode This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080@60Hz for best results.
3. Image Optimization 1. 3. Image Optimization Toggle to the left to launch the SamrtImage on screen display. 2. Toggle to the up or down to select among Standard, Internet, Game, LowBlue Mode. 3.1 SmartImage What is it? 3. The SmartImage on screen display will remain on screen for 5 seconds or you can also toggle to the left to make confirmation. There are multiple selections : Standard, Internet, Game, LowBlue Mode.
3. Image Optimization ultra-violet rays can cause eye damage, shortwave length blue light rays from LED displays can cause eye damage and affect vision over time. Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. 3.
4. FreeSync • • • • • • 4. FreeSync (2X6E8QDS, 2X6E8QJA) AMD Radeon R9 295X2 AMD Radeon R9 290X AMD Radeon R9 290 AMD Radeon R9 285 AMD Radeon R7 260X AMD Radeon R7 260 ■■ Processor A-Series Desktop and Mobility APUs • • • • • • • • • PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a single image.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Response Time (typ.) SmartResponse (typ.
5. Technical Specifications Tilt -5° / +20° Power (226E8QS) Consumption Normal Operation Sleep(Standby) Off Heat Dissipation* Normal Operation Sleep(Standby) Off Power LED indicator Power Supply AC Input Voltage at 100VAC, 50Hz 15.07 W (typ.) <0.5 W <0.3 W AC Input Voltage at 100VAC, 50Hz 51.42 BTU/hr(typ.) <1.71 BTU/hr <1.02 BTU/hr AC Input Voltage at 115VAC, 50Hz 15.66 W (typ.) <0.5 W <0.3 W AC Input Voltage at 115VAC, 50Hz 53.43 BTU/hr(typ.) <1.71 BTU/hr <1.
5. Technical Specifications Power (246E8QS) Consumption Normal Operation Sleep(Standby) Off Heat Dissipation* Normal Operation Sleep(Standby) Off Power LED indicator Power Supply AC Input Voltage at 100VAC, 50Hz 16.08 W (typ.) <0.5 W <0.3 W AC Input Voltage at 100VAC, 50Hz 54.87 BTU/hr(typ.) <1.71 BTU/hr <1.02 BTU/hr AC Input Voltage at 115VAC, 50Hz 16.04 W (typ.) <0.5 W <0.3 W AC Input Voltage at 115VAC, 50Hz 54.76 BTU/hr(typ.) <1.71 BTU/hr <1.02 BTU/hr AC Input Voltage at 230VAC, 50Hz 16.05 W (typ.
5. Technical Specifications Power (276E8QS) Consumption Normal Operation Sleep(Standby) Off Heat Dissipation* Normal Operation Sleep(Standby) Off Power LED indicator Power Supply AC Input Voltage at 100VAC, 50Hz 19.96 W (typ.) <0.5 W <0.3 W AC Input Voltage at 100VAC, 50Hz 68.12 BTU/hr(typ.) <1.71 BTU/hr <1.02 BTU/hr AC Input Voltage at 115VAC, 50Hz 19.86 W (typ.) <0.5 W <0.3 W AC Input Voltage at 115VAC, 50Hz 67.77 BTU/hr(typ.) <1.71 BTU/hr <1.02 BTU/hr AC Input Voltage at 230VAC, 50Hz 20.32 W (typ.
5.
5. Technical Specifications Environmental Energy Star YES Compliance and standards CE Mark, FCC Class B, RCM, CU, ISO9241-307, EPA, Regulatory Approvals WEEE, TCO Certified, CCC(2X6E8QS, 2X6E8QDS), CECP(2X6E8QS, 2X6E8QDS) Cabinet Black / White, or other color options as applicable in Color your region Finish Glossy Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2.
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920x1080@60Hz (analog input) 1920x1080@60Hz (digital input) Recommended Resolution 1920x1080@60Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 35.16 800x600 56.25 37.88 800x600 60.32 48.08 800x600 72.19 46.88 800x600 75.00 47.73 832x624 74.55 48.36 1024x768 60.00 56.48 1024x768 70.
6. Power Management 246E8QS: 6. Power Management Power Management Definition If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: VESA Mode Yes Yes 16.04 W (typ.) 18.52 W (Max.
6. Power Management 276E8QS: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED Color Active ON Yes Yes 19.70 W (typ.) 22.68 W (Max.) White Sleep OFF No No 0.5 W (typ.) White (blink) Switch Off OFF - - 0.3 W (typ.) OFF 276E8QDS: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED Color Active ON Yes Yes 19.76 W (typ.) 23.43 W (Max.) White Sleep OFF No No 0.5 W (typ.) White (blink) Switch Off OFF - - 0.3 W (typ.
7. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
7. Customer care and warranty 1.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
8. Troubleshooting & FAQs 8. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 8.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
8. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
8. Troubleshooting & FAQs making monitor adjustments via OSD? Ans.: Simply press the button, then select 'Reset' to recall all of the original factory settings. labelled 'desktop area', move the sidebar to 1920x1080 pixels. • Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920x1080@60Hz. • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.
8. Troubleshooting & FAQs (e.g. digital cameras, monitors, printers, scanners, etc) after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. 3. User Define; the user can choose his/her preference color setting by adjusting red, green blue color.
© 2017 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
