245C7 275C7 325C7 www.philips.
Table of Contents 1. Important........................................ 1 1.1 Safety precautions and maintenance................................... 1 1.2 Notational Descriptions.............. 3 1.3 Disposal of product and packing material............................................ 3 2. Setting up the monitor................ 5 2.1 Installation...................................... 5 2.2 Operating the monitor................. 6 3. Image Optimization..................... 8 3.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center. • Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold. • In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
1. Important 1.3 Disposal of product and packing material 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Waste Electrical and Electronic Equipment-WEEE Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings.
2. Setting up the monitor Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor Connecting to your PC 2. Setting up the monitor 2.1 Installation 5 4 3 2 1 6 Package contents 2 5 4 3 245C7 275C7 325C7 1 使用 AC/DC power input Earphone output VGA input HDMI input Display port input Kensington anti-theft lock 前请阅读使用说明 in k l © 20 16 Kon User’s Manual Monitor drivers 保留备用 ijke P h il ip s ll r .A N .V ig h se na er s re io n ts rv ed .U Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Front view product description On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor The OSD Menu Resolution notification Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu LowBlue Mode This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080@60Hz for best results.
3. Image Optimization 1. 3. Image Optimization Toggle to the left to launch the SamrtImage on screen display. 2. Toggle to the up or down to select among Text, Office, Photo, Movie, Game, Economy, LowBlue Mode and Off. 3.1 SmartImage What is it? 3. The SmartImage on screen display will remain on screen for 5 seconds or you can also toggle to the left to make confirmation. There are multiple selections: Text, Office, Photo, Movie, Game, Economy, LowBlue Mode and Off.
3. Image Optimization outstanding clarity in vibrant colors - all without artifacts and faded colors. • • Movie: Ramped up luminance, deepened color saturation, dynamic contrast and razor sharpness displays every details in darker areas of your videos without color washout in brighter areas maintaining a dynamic natural values for the ultimate video display.
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Response Time (typ.) SmartResponse (typ.) Optimum Resolution Viewing Angle Picture Enhancement Color gamut Display Colors Flicker Free Vertical Refresh Rate Horizontal Frequency sRGB LowBlue Mode Connectivity Signal Input Audio In/Out Input Signal IPS Technology W-LED system 245C7: 23.8" W (60.5 cm) 275C7: 27" W (68.6 cm) 325C7: 31.5" W (80.
4. Technical Specifications Power (245C7) Consumption Normal Operation Sleep(Standby) Off Heat Dissipation* Normal Operation Sleep(Standby) Off Power LED indicator Power Supply AC Input Voltage at 100VAC, 50Hz 16.40 W (typ.) <0.3 W <0.3 W AC Input Voltage at 100VAC, 50Hz 55.98 BTU/hr(typ.) <1.02 BTU/hr <1.02 BTU/hr AC Input Voltage at 115VAC, 50Hz 16.36 W (typ.) <0.3 W <0.3 W AC Input Voltage at 115VAC, 50Hz 55.83 BTU/hr(typ.) <1.02 BTU/hr <1.02 BTU/hr AC Input Voltage at 230VAC, 50Hz 16.87 W (typ.) <0.
4.
4. Technical Specifications Note 1. 4.1 Resolution & Preset Modes EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. Maximum Resolution 1920x1080@60Hz (analog input) 1920x1080@60Hz (digital input) Recommended Resolution 2. This data is subject to change without notice. Go to www.philips. com/support to download the latest version of leaflet. 1920x1080@60Hz (digital input) 3.
5. Power Management 5. Power Management The following setup is used to measure power consumption on this monitor. If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
6. Customer care and warranty together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 6. Customer care and warranty 6.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
6. Customer care and warranty Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.
6. Customer care and warranty 1.
6. Customer care and warranty 6.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
6. Customer care and warranty Netherlands Ecare +31 0900 0400 063 € 0.10 Norway Infocare +47 2270 8250 Local call tariff Mon to Fri : 9am - 6pm Poland MSI +48 0223491505 Local call tariff Mon to Fri : 9am - 6pm Portugal Mainteq 800 780 902 Free of charge Mon to Fri : 8am - 5pm Spain Mainteq +34 902 888 785 € 0.
6. Customer care and warranty Moldova N/A Comel +37322224035 Romania N/A Skin +40 21 2101969 Russia N/A CPS +7 (495) 645 6746 Serbia&Montenegro N/A Kim Tec d.o.o. +381 11 20 70 684 Slovakia N/A Datalan Service +421 2 49207155 Slovenia N/A PC H.
6. Customer care and warranty Korea Alphascan Displays, Inc 1661-5003 Mon.~Fri. 9:00am5:30pm Sat. 9:00am-1:00pm Malaysia R-Logic Sdn Bhd +603 5102 3336 Mon.~Fri. 8:15am5:00pm Sat. 8:30am-12:30am New Zealand Visual Group Ltd. 0800 657447 Mon.~Fri. 8:30am5:30pm Pakistan TVONICS Pakistan +92-213-6030100 Sun.~Thu. 10:00am6:00pm Philippines EA Global Supply Chain Solutions ,Inc. (02) 655-7777; 6359456 Mon.~Fri.
7. Troubleshooting & FAQs 7. Troubleshooting & FAQs • Check to see if the monitor cable has bent pins. • Make sure the computer is turned on. 7.1 Troubleshooting AUTO button doesn't function • This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. The auto function is applicable only in VGA-Analog mode.
7. Troubleshooting & FAQs Main Controls. It is valid only in VGA mode. and cannot be repaired. The damage mentioned above is not covered under your warranty. Horizontal flicker appears Image appears distorted. Text is fuzzy or blurred. • • Adjust the image using the “Auto” function in OSD Main Controls. • Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
7. Troubleshooting & FAQs making monitor adjustments via OSD? Ans.: Simply press the button, then select 'Reset' to recall all of the original factory settings. labelled 'desktop area', move the sidebar to 1920x1080 pixels. • Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK. • Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1920x1080@60Hz. • Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.
7. Troubleshooting & FAQs (e.g. digital cameras, monitors, printers, scanners, etc) after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. 3. User Define; the user can choose his/her preference color setting by adjusting red, green blue color.
© 2016 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
