244E5 www.philips.
Table of Contents 1. Important ................................................1 1.1 Safety precautions and maintenance...1 1.2 Notational Descriptions .............................2 1.3 Disposal of product and packing material ................................................................3 2. Setting up the monitor .........................4 2.1 Installation ...........................................................4 2.2 Operating the monitor ...............................6 2.
1. Important Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important Temperature: 0-40°C 32-95°F 1.2 Notational Descriptions Humidity: 20-80% RH The following subsections describe notational conventions used in this document. IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company. 1.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation Package contents 244E5 前请阅读使用说明 ilips e Ph inklijk 2013 Kon User’s Manual Monitor Driver SmartControl Software Ch in rig ht s a. Ve rsi on l Al .V. ,N ics on ctr Ele M5 244 E1T H7 0G 23 C18130 1A 使用 保留备用 2.
2. Setting up the monitor Connecting to your PC 244E5QHSD: 244E5QSD,244E5QSW: 4 3 2 1 MHL 3 2 6 1 4 4 5 2 3 1 2 3 1 AC/DC power input VGA input DVI-D input Kensington anti-theft lock AC/DC power input VGA input HDMI input HDMI or MHL input HDMI audio output Kensington anti-theft lock 244E5QHAD,244E5QHAW: Connect to PC 4 3 2 6 1 1. Connect the power cord to the back of the monitor firmly. MHL 7 4 2. Turn off your computer and unplug its power cable. 5 2 3 1 3.
2. Setting up the monitor 244E5QHAD,244E5QHAW: 2.2 Operating the monitor Front view product description 244E5QSD,244E5QSW,244E5QHSD: 5 5 7 3 7 3 6 4 2 6 4 2 Switch monitor’s power ON and OFF. Switch monitor’s power ON and OFF. Access the OSD menu. Confirm the OSD adjustment. Access the OSD menu. Confirm the OSD adjustment. Return to previous OSD level. Return to previous OSD level. Adjust the OSD menu. Adjust the speaker volume. Change display format. Change the signal input source.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 2.3 MHL (Mobile High-Definition Link) introduction What is it? MHL-HDMI Mobile High Definition Link (MHL) is a mobile audio/video interface for directly connecting mobile phones and other portable devices to high-definition displays. MHL An optional MHL cable allows you to simply connect your MHL capable mobile device to this large Philips MHL display, and watch your HD videos come to life with full digital sound.
3. Image Optimization 3. The SmartImage Lite on screen display will remain on screen for 5 seconds or you can also press OK button to make confirmation. 3. Image Optimization 3.1 SmartImage Lite 4. When SmartImage Lite is enabled, the sRGB scheme is disabled automatically. To use sRGB you need to disable SmartImage Lite with the button at the front bezel of your monitor.
3. Image Optimization Installation 3.2 SmartContrast v Follow the instruction and complete the installation. v You can launch after installation is completed. v If you want to launch later, you can either click the shortcut on desktop or toolbar.
3. Image Optimization Start with Standard pane: Adjust menu: v Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. v You can follow the instruction and do the adjustment. v Cancel prompts user if you want to cancel installation.
3. Image Optimization Color menu: v Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). v You can follow the instruction and do the adjustment. v Refer to below table for sub-menu item base on your input. v Example for Color Calibration: 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4.
3. Image Optimization First color Calibration Screen: v Previous button is disabled until the second color screen. v Next goes to the succeeding target (6-targets). v Displays current preference settings. v Final next goes File>Presets pane. v A checked box enables the feature. The check box is a toggle. v Cancel closes the UI and returns to the plug in page. v Enable Context Menu on desktop is checked (On) by default.
3. Image Optimization Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Lite tabs are not available. Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
3. Image Optimization Context Sensitive menu v Technical Support - displays the tech support page. The Context Sensitive menu is Enabled by default. If Enable Context Menu has been checked in the Options>Preferences pane, then the menu will be visible. v Check for Update - takes the user to PDI Landing and checks the user’s version against the most current available. v About - Displays detailed reference information: product version, release information, and product name.
7HFKQLFDO 6SHFLÀFDWLRQV 4. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Brightness SmartContrast Contrast Ratio (typ.) Response Time (typ.) SmartResponse Optimum Resolution Viewing Angle Picture Enhancement Display Colors Vertical Refresh Rate Horizontal Frequency MHL sRGB Connectivity Signal Input Audio In/Out Input Signal AH-IPS LCD LED 23.8" W (60.5cm) 16:9 0.2745 x 0.
7HFKQLFDO 6SHFLÀFDWLRQV 244E5QSD,244E5QSW: Power On Mode Sleep (typ.) Off (typ.) Power LED indicator Power Supply 24.0W(typ.), 25.5W(max.) 0.5W 0.3W On mode: White, Standby/Sleep mode: White (blinking) External, 100-240VAC, 50-60Hz 244E5QHAD,244E5QHAW: Power On Mode Sleep (typ.) Off (typ.) Power LED indicator Power Supply 25.2W(typ.), 33.8W(max.) 0.5W 0.3W On mode: White, Standby/Sleep mode: White (blinking) External, 100-240VAC, 50-60Hz 244E5QHSD: Power On Mode Sleep (typ.) Off (typ.
7HFKQLFDO 6SHFLÀFDWLRQV Environmental Packaging Specific Substances Energy Star Compliance and standards 100% recyclable 100% PVC BFR free housing YES Regulatory Approvals CE Mark, FCC Class B, CU, SEMKO, TCO Certified, ETL, BSMI, ISO9241-307 Cabinet Color Finish 244E5QSW, 244E5QHAW: White 244E5QSD, 244E5QHSD, 244E5QHAD: Black Cherry, or other color options as applicable in your region Glossy/Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.
7HFKQLFDO 6SHFLÀFDWLRQV 4.1 Resolution & Preset Modes Maximum Resolution 1920x1080@60Hz (analog input) 1920x1080@60Hz (digital input) Recommended Resolution 1920x1080@60Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.02 1024x768 75.03 63.89 1280x1024 60.02 79.98 1280x1024 75.03 55.94 1440x900 59.
5. Power Management 5. Power Management v Color temperature: 6500k with full white pattern If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
6. Regulatory Infomation 6. Regulatory Information Some of the Environmental features of TCO Certified Displays: Lead-free Product v Production facilities have an Environmental Management System (EMAS or ISO 14001) Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.
6. Regulatory Infomation EPEAT CE Declaration of Conformity (www.epeat.net) This product is in conformity with the following standards The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. v EN60950-1:2006+A11:2009+A1: 2010+A12:2011 (Safety requirement of Information Technology Equipment).
6. Regulatory Infomation Energy Star Declaration Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (www.energystar.gov) As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
6. Regulatory Infomation Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière.
6. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
6. Regulatory Infomation EU Energy Label China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request. The European Energy Label informs you on the energy efficiency class of this product.
7. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country CSP Hotline Number Price Opening Hours Austria RTS +43 0810 000206 € 0.07 Mon to Fri : 9am - 6pm Belgium Ecare +32 078 250851 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center CSP Consumer care number Belarus N/A IBA +375 17 217 3386 +375 17 217 3389 Bulgaria N/A LAN Service +359 2 960 2360 Croatia N/A MR Service Ltd +385 (01) 640 1111 Czech Rep.
7. Customer care and warranty Contact Information for APMEA region: Country ASP Consumer care number Opening hours Armenia Azerbaijan Georgia Kyrgyzstan Tajikistan Firebird +97 14 8837911 service centre Sun.~Thu. 09:00 - 18:00 Australia AGOS NETWORK PTY LTD 1300 360 386 Mon.~Fri. 9:00am-5:30pm Hong Kong Macau Company: Smart Pixels Technology Ltd. Hong Kong: Tel: +852 2619 9639 Macau: Tel: (853)-0800-987 Mon.~Fri. 9:00am-6:00pm Sat.
7. Customer care and warranty Taiwan FETEC.CO 0800-231-099 Mon.~Fri. 09:00 - 18:00 Thailand Axis Computer System Co., Ltd. (662) 934-5498 Mon.~Fri. 08:30am~05:30pm Turkmenistan Technostar Service Centre +(99312) 460733, 460957 Mon.~Fri. 09:00 - 18:00 Uzbekistan Soniko Plus Private Enterprise +99871 2784650 Ltd Vietnam FPT Service Informatic Company Ltd. Ho Chi Minh City Branch Japan ࡈࠖࡊࠬࡕ࠾ ࠲ࠨࡐ ࠻ 0120-060-530 ࡦ࠲ +84 8 38248007 Ho Chi Minh City +84 5113.562666 Danang City +84 5113.
8. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 8. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
8. Troubleshooting & FAQs v Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. The "power on" light is too strong and is disturbing v You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Image appears blurred, indistinct or too dark v Adjust the contrast and brightness on On-Screen Display.
8. Troubleshooting & FAQs Ans.: It might be your graphic adaptor is not compatible with the SmartControl Lite. If your graphic adaptor is one of the above mentioned brands, try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove SmartControl Lite, and re-install it once more. If it is still not working, we are sorry that the graphic adaptor is not supported.
8. Troubleshooting & FAQs Monitor drivers (.inf and .icm files) will be installed automatically. 2. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc) Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". 3.
8. Troubleshooting & FAQs Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. then you will see a notification message on the display. Once the mobile device wakes up, the monitor’s display will wake and show the images.
© 2013 Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
