243V5 www.philips.
Table of Contents 1. Important.................................................1 1.1 Safety precautions and maintenance....1 1.2 Notational Descriptions..............................2 1.3 Disposal of product and packing material.................................................................3 2. Setting up the monitor..........................4 2.1 Installation............................................................4 2.2 Operating the monitor................................6 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
1. Important • Temperature: 0-40°C 32-95°F • Humidity: 20-80% RH 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Important information for Burn-in/Ghost image • Notes, Cautions and Warnings Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important 1.3 Disposal of product and packing material Taking back/Recycling Information for Customers Waste Electrical and Electronic EquipmentWEEE Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation Package contents Register your product and get support at www.philips.com/welcome Quick Start 使用 2. Attach the base column with the monitor until it clicks into position. 前请阅读使用说明 e Ph i n kl ij k © 2014 Kon User’s Manual Monitor drivers SmartControl software 保留备用 ilips ll r .A N.
2. Setting up the monitor 243V5LHAB/243V5QHAB/243V5QHABA/243V 5QHAWA Connecting to your PC 243V5LSB/243V5QSB/243V5QSBA(Analog only) 5 5 4 1 6 7 7 4 1 1 AC power input 2 HDMI input 243V5LSB/243V5LSW/243V5QSB/243V5QSW/2 43V5QSBA/243V5QSWA 1 3 3 DVI-D input 4 VGA input 5 Audio input 6 Earphone jack 7 Kensington anti-theft lock 4 7 Connect to PC 4 1. Connect the power cord to the back of the monitor firmly. 3 1 2. Turn off your computer and unplug its power cable.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Front view product description On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor The OSD Menu 243V5LAB/243V5QAB/243V5QABA Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
2. Setting up the monitor Resolution notification 2.3 Remove Base Stand and Base This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1080 @ 60 Hz for best results. Remove the Base Stand Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1.
2. Setting up the monitor Note This monitor accepts a 100mm × 100mm mounting interface. 100mm 100mm Caution For use only with UL Listed Wall Mount Bracket with minimum weight/load 3.
3. Image Optimization 3.2 Philips SmartControl Lite 3. Image Optimization The new SmartControl Lite software by Philips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you through finetuning resolution, Color calibration, Clock/Phase adjustments, RGB White point adjustment, etc. 3.
3. Image Optimization Start with Standard pane: Adjust menu: • Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. • You can follow the instruction and do the adjustment. • Cancel prompts user if you want to cancel installation.
3. Image Optimization Color menu: • Color Menu allow you to adjust RGB, Black Level, White Point, and Color Calibration. • You can follow the instruction and do the adjustment. • Refer to below table for sub-menu item base on your input.
3. Image Optimization • Cancel closes the UI and returns to the plug in page. Options>Preferences - Will only be active when selecting Preferences from the dropdown Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5.
3. Image Optimization Options>Audio - Will only be active when selecting Audio from the drop-down Options menu. the program file. Any preset set to run at startup will not load when this box is unchecked (Disabled). • Enable transparency mode (Windows 8,7, Vista, XP). Default is 0% Opaque. Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available.
3. Image Optimization DDC/CI, only the Help and Options tabs are available. preset. Factory Preset can also be called from the drop down menu. • Tune Display - Opens the SmartControl Lite control panel. Task Tray Menu Enabled The task tray menu can be displayed by rightclicking on the SmartControl Lite icon from the task tray. Left Click will launch the application. Context Sensitive menu The task tray has five entries: The Context Sensitive menu is Enabled by default.
3. Image Optimization Task Tray Menu Disabled When the Task Tray is disabled in the preference folder, only the EXIT selection is available. To completely remove SmartControl Lite from the task tray, disable Run at Startup in Options>Preferences. Note All the illustrations in this section are for reference only. SmartControl software version might be changed without notification. Please always check official Portrait website www. portrait.
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch Brightness SmartContrast Contrast Ratio (typ.) Response Time (typ.) SmartResponse Optimum Resolution Viewing Angle Display Colors Vertical Refresh Rate Horizontal Frequency sRGB Connectivity Signal Input Input Signal Audio In/Out TN-LCD(243V5L);MVA LCD(243V5Q) LED 23.6" W (59.9 cm) 16:9 0.272 × 0.
4.
4. Technical Specifications Product with stand Product without stand Product with packaging Operating Condition Temperature range (operation) Temperature range (Non-operation) Relative humidity MTBF 3.66kg 3.22kg 4.70kg 0°C to 40 °C -20°C to 60°C 20% to 80% 30,000hrs Environmental ROHS EPEAT Packaging Specific Substances Energy Star Compliance and standards YES Silver (www.epeat.
4. Technical Specifications 4.1 Resolution & Preset Modes Maximum Resolution 1920 × 1080 @ 60 Hz (analog input) 1920 × 1080 @ 60 Hz (digital input) Recommended Resolution 1920 × 1080 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 × 400 70.09 31.47 640 × 480 59.94 35.00 640 × 480 66.67 37.86 640 × 480 72.81 37.50 640 × 480 75.00 37.88 800 × 600 60.32 46.88 800 × 600 75.00 48.36 1024 × 768 60.00 60.02 1024 × 768 75.03 44.77 1280 × 720 59.86 63.
5. Power Management 243V5LHAB: 5. Power Management Power Management Definition If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: VESA Mode Yes Yes 22.89W (typ.) 31.25W (max.
6. Regulatory Infomation 6.
6. Regulatory Infomation EPEAT CE Declaration of Conformity (www.epeat.net) This product is in conformity with the following standards The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA.
6. Regulatory Infomation Energy Star Declaration Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (www.energystar.gov) As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
6. Regulatory Infomation EN 55022 Compliance (Czech Republic Only) Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes: • Réorienter ou déplacer l’antenne de réception.
6. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
6. Regulatory Infomation EU Energy Label China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request. The European Energy Label informs you on the energy efficiency class of this product.
7. Customer care and warranty 7. Customer care and warrant black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. Types of Pixel Defects Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country CSP Hotline Number Price Opening Hours Austria RTS +43 0810 000206 € 0.07 Mon to Fri : 9am - 6pm Belgium Ecare +32 078 250851 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center CSP Consumer care number Belarus NA IBA +375 17 217 3386 +375 17 217 3389 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA MR Service Ltd +385 (01) 640 1111 Czech Rep.
7. Customer care and warranty Contact Information for APMEA region: Country Australia ASP AGOS NETWORK PTY LTD Consumer care number Opening hours 1300 360 386 Mon.~Fri. 9:00am-5:30pm New Zealand Visual Group Ltd. 0800 657447 Mon.~Fri. 8:30am-5:30pm Hong Kong Macau Company: Smart Pixels Technology Ltd. Hong Kong: Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 Mon.~Fri. 9:00am-6:00pm Sat. 9:00am-1:00pm India REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Mon.~Fri.
8. Troubleshooting & FAQs 8. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 8.1 Troubleshooting Visible signs of smoke or sparks This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
8. Troubleshooting & FAQs Image appears blurred, indistinct or too dark • 8.2 General FAQs Adjust the contrast and brightness on On-Screen Display. Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this monitor: 1920 x 1080 @ 60 Hz. An "after-image", "burn-in" or "ghost image" remains after the power has been turned off.
8. Troubleshooting & FAQs 2. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc) Monitor drivers (.inf and .icm files) will be installed automatically. Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". 3.
8. Troubleshooting & FAQs period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired.
© 2014 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
