240B4/240P4 www.philips.
Table of Contents 1. Important �����������������������������������������������1 1.1 Safety precautions and maintenance �1 1.2 Notational Descriptions ���������������������������2 1.3 Disposal of product and packing material ���������������������������������������������������������������3 2. Setting up the monitor �����������������������4 2.1 Installation ���������������������������������������������������������4 2.2 Operating the monitor ������������������������������7 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important • Temperature: 0-40°C 32-104°F 1.2 Notational Descriptions • Humidity: 20-80% RH The following subsections describe notational conventions used in this document. Important information for Burn-in/Ghost image • • Notes, Cautions and Warnings Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important Taking back/Recycling Information for Customers 1.3 Disposal of product and packing material Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. Waste Electrical and Electronic EquipmentWEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
2. Setting up the monitor 240B4QPYC/240B4LPYC 2. Setting up the monitor 240B4 2.1 Installation Package contents 240B4QPYE/240P4QPYE 240B4 Monitor 使用 前请阅读使用说明 e Ph inklijk © 2016 Kon User’s Manual Monitor drivers 保留备用 ili p s .A N.V ll r ig h ts er na u th sio n s re ve d. U Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
2. Setting up the monitor Install the base 2. Snap in the base in the VESA mount area. 240B4QPYE/240P4QPYE 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 3. Hold the base with both hands. (1) G ently attach the base to the column until the three guiding pins rest into the position holes. 2. Snap in the base in the VESA mount area.
2. Setting up the monitor Connecting to your PC Connect to PC 1. Connect the power cord to the back of the monitor firmly. 240B4QPYE 6 4 3 2 9 5 2. Turn off your computer and unplug its power cable. USB 7 8 3. Connect the monitor signal cable to the video connector on the back of your computer. 1 10 4. Plug the power cord of your computer and your monitor into a nearby outlet. 3 2 4 9 5 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu Power Sensor This monitor is designed for optimal performance at its native resolution, 1920 × 1200 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1200 @ 60 Hz for best results.
2.
2. Setting up the monitor 240B4QPYC/240B4LPYC 2.3 Remove the Base Assembly for VESA Mounting 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 240B4QPYE/240P4QPYE 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 2. Remove the screws from hinge cover. 1 2.
2. Setting up the monitor 3. While keeping the release button pressed, tilt the base and slide it out. 2 1 Note This monitor accepts a 100mm x 100mm mounting interface.
3. Image Optimization 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. There are six modes to select: Office, Photo, Movie, Game, Economy and Off. 3. Image Optimization 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time.
3. Image Optimization office applications and lower power consumption. • Off: No optimization by SmartImage. 3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds.
4. PowerSensor™ 4. PowerSensor™ • • • is within 100 cm or 40 inches of the display, step up signal strength when wearing black or other dark clothes. 4. How does it work? PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect userpresence. When the user is in front of the monitor the monitor operates normally, at the predetermined settings that the user has set- i.e.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Response time SmartResponse time Optimum Resolution Viewing Angle (typ.
5.
5. Technical Specifications Packaging Specific Substances EnergyStar Compliance and standards Regulatory Approvals Cabinet Color Finish 100% recyclable 100% PVC BFR free housing YES CE, FCC Class B, SEMKO, UL/cUL, CU-EAC, TCO Certified Edge, TUV-GS, TUV-ERGO, RCM Black/Silver/Grey Texture Note 1. EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www.epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920 x 1200 @ 60 Hz (analog input) 1920 x 1200 @ 60 Hz (digital input) Recommended Resolution 1920 x 1200 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.02 1024x768 75.03 44.77 1280x720 59.86 63.89 1280x1024 60.02 79.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
7. Customer care and warranty Poland MSI +48 0223491505 Local call tariff Mon to Fri : 9am - 6pm Portugal Mainteq 800 780 902 Free of charge Mon to Fri : 8am - 5pm Spain Mainteq +34 902 888 785 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center CSP Consumer care number Belarus NA IBA +375 17 217 3386 +375 17 217 3389 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA MR Service Ltd +385 (01) 640 1111 Czech Rep.
7. Customer care and warranty Contact Information for APMEA region: Country Australia ASP AGOS NETWORK PTY LTD Consumer care number Opening hours 1300 360 386 Mon.~Fri. 9:00am-5:30pm New Zealand Visual Group Ltd. 0800 657447 Mon.~Fri. 8:30am-5:30pm Hong Kong Macau Company: Smart Pixels Technology Ltd. Hong Kong: Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 Mon.~Fri. 9:00am-6:00pm Sat. 9:00am-1:00pm India REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Mon.~Fri.
8. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 8. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
8. Troubleshooting & FAQs • The "power on" light is too strong and is disturbing Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. • You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Image appears blurred, indistinct or too dark • Adjust the contrast and brightness on On-Screen Display.
8. Troubleshooting & FAQs Q3: What are the .inf and .icm files on the user manual? How do I install the drivers (.inf and .icm)? Ans.: These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions.
8. Troubleshooting & FAQs Q11: What is Image Sticking, or Image Burnin, or After Image, or Ghost Image in LCD panels? Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology.
© 2016 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
