Specifications

Mechanical Instructions
EN 7LC03E MV AA 4.
4.5 Removing Back Cover
Remove back cover, by opening the screws (M4x5) located at
the center back of the cover.
Figure 4-2
Figure 4-3
Remove the screws (M4x5) located at the sides of the metal
frame.
Figure 4-4
4.6 Internal Cabling
Disconnect the cables from the LCD display to back cover. Two
cables must be disconnected when removingthe back cover
(speakersa and STBY switch).
Figure 4-5
4.7 Handling of the Display
Once removed from the mirror TV, the display and LC4.6E
chassis can be accessed and repaired in the normal way (see
LC4.6E service manual). But again, do not remove the display
from the set, unless the fault relates to the LCD panel.
Figure 4-6
Note: The display has a strip of foam attached to it all around
the perimeter of the front face, to allow even contact with the
front part of the mirror TV aluminum frame.
Figure 4-7 Front part
F_15730_001.ep
s
26050
5
F_15730_002.ep
s
26050
5
F_15730_003.ep
s
260505
F_15730_004.ep
s
26050
5
F_15730_005.ep
s
260505
LCD Panel Display Area
Shorte
r
foam
Longer foam
Aluminium Rim of LCD Panel
F 15730 007.e
p
s