227E7 237E7 www.philips.
Table of Contents 1. Important.................................................1 1.1 Safety precautions and maintenance....1 1.2 Notational Descriptions..............................2 1.3 Disposal of product and packing material.................................................................3 2. Setting up the monitor..........................4 2.1 Installation............................................................4 2.2 Operating the monitor................................6 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor.
1. Important • • • Temperature: 0-40°C 32-104°F • Humidity: 20-80% RH 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company. 1.
2. Setting up the monitor Install base stand 2. Setting up the monitor 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2.1 Installation Package contents 227E7 237E7 使用 2. Hold the base stand with both hands and firmly insert the base stand into the base column. (1) G ently attach the base to the base column until the latch locks the base. 前请阅读使用说明 in k l © 20 15 Kon User’s Manual Monitor drivers 保留备用 ijke P h il ip s ll r .A N .
2. Setting up the monitor Connecting to your PC Connect to PC 1. Connect the power cord to the back of the monitor firmly. 227E7QS, 237E7QS: 2. Turn off your computer and unplug its power cable. 3 2 1 3. Connect the monitor signal cable to the video connector on the back of your computer. 4 4. Plug the power cord of your computer and your monitor into a nearby outlet. 2 3 1 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor 2.2 Operating the monitor Front view product description Press more than 3 seconds to switch display power ON or OFF. Access the OSD menu. Confirm the OSD adjustment. 227E7QS/237E7QS: Change display format. 227E7QDS/237E7QDS: Adjust the speaker volume. Adjust the OSD menu. Change the signal input source. Adjust the OSD menu. SmartImage Lite. There are three modes to be selected: Standard, Internet and Game. Return to previous OSD level.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1920×1080@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920×1080@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor Note 2.3 MHL (Mobile High-Definition Link) introduction • The port marked [MHL-HDMI] is the only port on the monitor that supports the MHL function when the MHL cable is used. Note that the MHL certified cable is different than a standard HDMI cable.
3. Image Optimization 1. Toggle to the left to launch the SamrtImage on screen display. 3. Image Optimization 2. Toggle to the up or down to select between Standard, Internet, Game. 3.1 SmartImage Lite 3. The SmartImage on screen display will remain on screen for 5 seconds or you can also toggle to the left to make confirmation. There are three modes to be selected: Standard, Internet, Game.
3. Image Optimization 3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a LCD monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. Why do I need it? You want the very best visual clarity and viewing comfort for every type of content.
4. Technical Specifications 4. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Response Time (typ.) SmartResponse (typ.) Optimum Resolution Viewing Angle Picture Enhancement Display Colors Vertical Refresh Rate Horizontal Frequency MHL sRGB Connectivity Signal Input Audio In/Out Input Signal AH-IPS W-LED system 227E7QS/227E7QDS: 21.5" W (54.6cm) 237E7QS/237E7QDS: 23" W (58.4cm) 16:9 227E7QS/227E7QDS: 0.248 mm x 0.
4.
4. Technical Specifications 3. Smart response time is the optimum value from either GtG or GtG (BW) tests. 4.1 Resolution & Preset Modes Maximum Resolution 1920x1080@60Hz (analog input) 1920x1080@60Hz (digital input) Recommended Resolution 1920x1080@60Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 35.00 640x480 66.67 37.86 640x480 72.81 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.
5. Power Management 237E7QDS: 5. Power Management Power Management Definition If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
6. Regulatory Infomation Corporate Social Responsibility 6. Regulatory Information • The brand owner demonstrates the product is manufactured under working practices that promote good labour relations and working conditions. The Criteria Document can be downloaded from our web site. The criteria included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world.
6. Regulatory Infomation Lead-free Product CE Declaration of Conformity Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle.
6. Regulatory Infomation Energy Star Declaration Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (www.energystar.gov) As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device.
6. Regulatory Infomation EN 55022 Compliance (Czech Republic Only) nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière.
6. Regulatory Infomation North Europe (Nordic Countries) Information Ergonomie Hinweis (nur Deutschland) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften.
6. Regulatory Infomation Information for U.K. only GREEN&YELLOW -“EARTH”(“E”) Important: 1. The GREEN&YELLOW wire must be connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN&YELLOW. This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK. 1.
6. Regulatory Infomation China RoHS VCCI-B The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request.
6. Regulatory Infomation Restriction on Hazardous Substances statement (India) This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
7. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country CSP Hotline Number Price Opening Hours Austria RTS +43 0810 000206 € 0.07 Mon to Fri : 9am - 6pm Belgium Ecare +32 078 250851 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center CSP Consumer care number Belarus N/A IBA +375 17 217 3386 +375 17 217 3389 Bulgaria N/A LAN Service +359 2 960 2360 Croatia N/A MR Service Ltd +385 (01) 640 1111 Czech Rep.
7. Customer care and warranty Contact Information for APMEA region: Country ASP Consumer care number Opening hours Armenia Azerbaijan Georgia Kyrgyzstan Tajikistan Firebird service centre +97 14 8837911 Sun.~Thu. 09:00 - 18:00 Australia AGOS NETWORK PTY LTD 1300 360 386 Mon.~Fri. 9:00am-5:30pm Hong Kong Macau Company: Smart Pixels Technology Ltd. Hong Kong: Tel: +852 2619 9639 Macau: Tel: (853)-0800-987 Mon.~Fri. 9:00am-6:00pm Sat.
7. Customer care and warranty Vietnam FPT Service Informatic Company Ltd. - Ho Chi Minh City Branch +84 8 38248007 Ho Chi Minh City +84 5113.562666 Danang City +84 5113.562666 Can tho Province Japan フィリップスモニター ・サポートセンター 0120-060-530 29 Mon.~Fri. 8:00-12:00, 13:3017:30 Sat. 8:00-12:00 Mon.~Fri.
8. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 8. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
8. Troubleshooting & FAQs • disturbing Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. • You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Image appears blurred, indistinct or too dark • Adjust the contrast and brightness on On-Screen Display.
8. Troubleshooting & FAQs Ans.: These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically. 1.
8. Troubleshooting & FAQs "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. • Please check if your mobile device is MHL certified. • You also need to have a MHL certified cable to connect the devices.
8. Troubleshooting & FAQs Q3. I cannot hear sound from the monitor display. Ans.: • Make sure your monitor display has builtin speakers and the volume is turned on the monitor side, and also on the mobile device side. You may also want to use optional headphones. • If your monitor display does not have in built speakers, then you can connect optional headphones to the output on the monitor. Please ensure that the volume is turned on the monitor side, and also on the mobile device side.
© 2015 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
