Flat Panel Television User Manual

6
2. Setting up the monitor
 Connecting to your PC
4
4
5
6
1
 ACpowerinput
2
 VGAinput
3
 HDMIinputs(HDMI1andHDMI2)
4
 HDMIaudiooutput
5
 Kensingtonanti-theftlock
6
 3Dglasses
Connect to PC
1. Connectthepowercordtothebackof
themonitorfirmly.
2. Turnoffyourcomputerandunplugits
powercable.
3. Connectthemonitorsignalcabletothe
videoconnectoronthebackofyour
computer.
4. Plugthepowercordofyourcomputerand
yourmonitorintoanearbyoutlet.
5. Turnonyourcomputerandmonitor.Ifthe
monitordisplaysanimage,installationis
complete.
6. Putyour“Snap-on3Dglasses”or“3D
glasses”on,andpressthe3Dhotkeyon
thefrontbezel.Youarereadytoview3D
images.
 Note
The3Dglassesaredesignedfor3Dviewing
only.Itisveryimportantthatyouusethe3D
glassesbundledwiththemonitor.
Ifyousitoutsideofthespecified3Dviewing
angleordistancewhenviewing3Dimages,the
3Dimagesmaylookoverlappedornotshown
properly.