Register your product and get support at www.philips.
Model Serial www.philips.com/support Österreich 0810 000205 €0.07 pro Minute België/Belgique 078250145 €0.06 Per minuut/Par minute България +3592 489 99 96 Местен разговор Hrvatska 01 6403 776 Lokalni poziv Česká republika 800142840 Bezplatný hovor Danmark 3525 8759 Lokalt opkald Estonia 6008600 local Suomi 09 2311 3415 paikallispuhelu France 0821 611655 €0.09 Par minute Deutschland 01803 386 852 €0.
1 Notice 2 2 Important 4 3 TV overview 6 6 6 Side controls and indicators Remote control 4 Use your product Switch your TV on/off or to standby Switch channels Watch connected devices Adjust TV volume Use teletext 5 Use more of your product Access TV menus Remove devices from the home menu Change picture and sound settings Use advanced teletext features Create and use lists of favourite channels Use timers Use TV lock Use the TV clock Use Scenea Watch TV in dual view View photos and play music from
bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.
English In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord cable. Copyright VESA, FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association. ® Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world.
• 2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety • Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
• • • Screen care • • • • • Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Unplug the TV before cleaning. Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
3 TV overview Remote control This section gives you an overview of commonly used TV controls and functions. Side controls and indicators 1 28 2 27 3 4 5 26 25 6 4 24 3 8 9 2 1 a 23 POWER: Switches the product on or off. The product is not powered off completely unless it is physically unplugged. b P/CH +/-: Switches to the next or previous channel. c 7 22 SOURCE: Selects connected devices. 10 11 12 13 14 15 16 17 18 d VOLUME +/-: Increases or decreases volume.
• • (Standby-On) Switches the TV to standby if it is on. Switches on the TV if it is in standby. b MHEG/TELETEXT Toggles teletext on or off. c SOURCE Selects connected devices. d Colour buttons Selects tasks or options. e AD (Audio Descriptor) (For RF Digital TV only) UK only: Enables audio commentary for the visually handicapped. f (Home) Toggles the home menu on or off. g OPTIONS Accesses options relating to the current activity or selection.
4 Use your product This section helps you perform basic operations (see ‘Use more of your product’ on page 10). Note • If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- or SOURCE at the side of the TV. Switch channels Switch your TV on/off or to standby To switch on • If the standby indicator is off, press POWER at the side of the TV. • If the standby indicator is red, press (Standby-On) on the remote control.
English Adjust TV volume 1 Press OK. » The channel grid appears. 2 Press to browse the channel grid and preview a channel. » The channel content is displayed after a lapse of approximately two seconds. 3 When you find a channel of your choice, press OK to watch. » The selected channel appears. Watch connected devices To increase or decrease volume • Press +/-. • Press VOLUME +/- on the side of the TV. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound.
5 Use more of your product Remove devices from the home menu Access TV menus 1 2 3 If a device is no longer connected to the TV, remove it from the home menu. Menus help you to install channels, change picture and sound settings and access other features. 1 Press (Home). » The menu screen appears. Add new device 4 Press Press (Home). to select a device to remove. Press OPTIONS. » The [Remove device] list appears. Press OK and select [Remove] to remove the device.
• • • • • 3 [Personal]Lists customised personal picture settings. [Vivid]Maximises picture settings. [Standard]Adjusts picture settings to suit most environments and types of video. [Movie]Applies picture settings ideally suited for movie viewing. [Game]Applies picture settings maximised for fast-moving games. [Energy saving]Applies low-energy picture settings. Press OK to confirm your choice. » The selected smart picture setting is applied.
[Auto format](Not for HDMI, YPbPr - EXT2/ EXT3 or PC mode.) Enlarges the picture automatically to best fit the screen. The subtitles remain visible. [Super zoom](Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion. [4:3]Shows the classic 4:3 format. [Subtitle zoom]Displays 4:3 pictures over the full area of the screen, with sub-titles visible. Part of the top of the picture is clipped off. [Movie exp.14:9](Not for HD and PC mode.
• • Use advanced teletext features Access the teletext options menu Most of the advanced teletext features are accessed via the teletext options menu. • 4 5 [Language]Switches to a different language group to display a language correctly when that language uses a different character set. Press OK to confirm your choice. Press MHEG/TELETEXT to exit the teletext options menu. Select teletext subpages A teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number.
» The channel options menu appears. Tip • You can create and store up to four favourite lists on your TV. Select a favourite list 1 When watching TV, press OK to display the channel grid. 2 Press OPTIONS. » The channel options menu appears. 3 Press OK to select [Show favourite ch.]. » The favourite lists appear. 4 5 Press 4 5 Press OK. » The favourite lists appear. Press to select a favourite list to add the channel to. 7 Press OK. » The channel is added to the favourite list.
Use timers 8 You can set timers to switch the TV on or switch to standby at a specified time. 9 Press OK to confirm. 10 Press (Home) to exit. Automatically switch the TV to standby (sleeptimer) Sleeptimer switches the TV to standby after a pre-defined period of time. English Press to select [Programme no.] and set the channel. Tip • Select [On timer] > [Activate] > [Off] to disable [On timer]. • When [On timer] is [Off], only [Activate] can be selected.
8 Enter the new code using the Numeric buttons. » A message appears prompting you to enter the new code again for confirmation. 5 For each selection, press OK to lock or unlock the channel. Note • Restart the TV for the change to take effect. Tip • If you forget your code, enter ‘8888’ to override any existing codes. Lock or unlock the TV Locking the TV prevents your child from accessing all channels and connected devices. 1 2 3 Press (Home). Press to select [Setup] > [Features] > [TV lock].
Press any key except (Standby-On) or PICTURE to return to normal TV viewing. 3 Press any key except (Standby-On) or PICTURE to return to normal TV viewing. English 2 Personalize the Scenea picture Use sleeptimer with Scenea wallpaper 1 While the TV is on, connect the USB storage device containing your pictures (JPEG format only) to the USB connector at the side of your TV. » The home menu appears. If the home menu does not appear, press (Home).
View photos Note • [Dual View] is available only when the TV is connected to a device, such as a PC, via VGA or DVI connection. • When in Dual view mode, press +/- to adjust volume in the main screen and press P +/- or Numeric buttons to switch between the TV channels in the auxiliary screen. View photos and play music from a USB storage device 1 In the USB content browser, select [Picture] and press to enter. 2 Press GUIDE to switch between thumbnail and file browsing views. 3 Press album.
3 [Show info]Displays the picture name, date, size and next picture in the slide show. Press OK to confirm your setting. Note Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/support for availability. • [Rotate image] and [Show info] appear only when you press OK or slideshow. to pause the Listen to music 1 In the USB thumbnail browser view, select [MUSIC] and press to enter.
Access decoder channel You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV. The decoder or a descrambler must be connected to EXT1. Set decoder channel Reset the TV to factory settings You can restore the default picture and sound settings of your TV. Channel installation settings remain the same. 1 2 Press 3 Press OK or to enter the [Factory settings] menu. » [Reset] is highlighted.
6 Install channels Step 2 Install Channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and fine tune channels. 1 2 Press (Home). Press to select [Setup] > [Installation] > [Channel install.] > [Channel assistant]. Picture Automatically install channels Sound Channel assistant Channel install.
6 7 8 Press to select [Stop] or [Continue]. When done, press This section describes how to search and store analogue TV channels manually. Press 3 4 Press 5 6 Press OK to confirm. Press to select [Setup] > [Installation] > [Channel install.] > [Analogue: Manual]. » The [Analogue: Manual] menu appears. Sound Menu language Channel assistant Channel install. Analogue: Manual Decoder Factory setting Current software Installation Software update Press to select the item you want to adjust.
Press tune]. 4 5 6 Press 7 8 9 to select and enter [Fineto adjust frequency. 3 Press OPTIONS. » The channel options menu appears. 4 Press to select and enter [Rename chan.]. » A text input box appears. 5 6 Press Press OK when done. Press to select [Store cur. chan.] to store channel number. Press to enter [Store cur. chan.]. Press to select [Yes] and press OK to store current channel. Press to select characters. Press OK to confirm each of the characters. Tip (Home) to exit.
7 Connect devices This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. a PC IN (VGA and AUDIO IN) Audio and video input from a computer. PC IN(AUDIO) Note VGA • Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. VGA Back connectors for 19-22 inch TV b HDMI 1 Digital audio and video input from highdefinition digital devices such as Blu-ray players. SERV.
h EXT 2 (Y Pb Pr and AUDIO L/R) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. TV ANTENNA f AV OUT (VIDEO OUT and AUDIO OUT L/R) Audio and video output to analogue devices such as another TV or a recording device. AUDIO IN Back connectors for 26 inch and larger TV g EXT 1 (RGB and CVBS) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. HDMI 2/ DVI VGA SERV.
a PC IN (VGA and AUDIO IN) Audio and video input from a computer. d SPDIF OUT Digital audio output to home theatres and other digital audio systems. PC IN(AUDIO) VGA VGA b HDMI 1/2 Digital audio and video input from highdefinition digital devices such as Blu-ray players. e EXT 1 (RGB and CVBS) / CVBS (EXT 2) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. EXT2 supports S-Video.
English a USB Data input from USB storage devices. b Stereo audio output to headphones or earphones. c AUDIO L/R Audio input from analogue devices connected to VIDEO. g SERV. U For use by service personnel only. Side connectors 1 2 d VIDEO Composite video input from analogue devices such as VCRs.
e S-VIDEO S-Video (side) to be used with Audio L/R connectors for camcorder, game console, etc. When you use the S-Video (side) for video signals, do not use the Composite video (side) input for video signals. • HDMI cable • DVI-HDMI cable For TV of size 22 inch and smaller PC IN(AUDIO) For TV of size 26 inch and larger AUDIO IN : LEFT / RIGHT HDMI 1/ DVI HDMI 2/ DVI VGA f HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players.
VGA cable Use one-touch standby 1 For TV of size 22 inch and smaller PC IN(AUDIO) For TV of size 26 inch and larger AUDIO IN : LEFT / RIGHT HDMI 1/ DVI HDMI 2/ DVI VGA VGA Press and hold Standby on the TV’s or device’s remote control for at least three seconds. » The TV and all connected HDMI devices switch to standby. Use a Kensington lock There is a Kensington security slot at the back of the TV.
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support.
Required mounting bolts 4 x M4 4 x M4 6 x M4 4 x M6 4 x M6 English TV screen Required size (inches) pitch (mm) 19 75 x 75 22 100 x 100 26 200 x 100 32 200 x 200 42 400 x 400 EN 31
9 Troubleshooting This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Check that the power cable is securely connected. The remote control is not working properly: • Check that the remote control batteries are correctly inserted according to the +/- orientation. • Replace the remote control batteries if they are flat or weak.
Sound issues There is a picture but sound quality is poor: • If a HDMI-to-DVI adaptor or HDMI to DVI cable is used, check that an additional audio cable is connected to AUDIO L/R or AUDIO IN (mini-jack only). Computer connection issues The computer display on the TV is not stable: • Check that a supported resolution and refresh rate is selected on the computer. • Set the TV picture format to unscaled.
E 10 Index A analogue channel fine-tune 22 B 29 29 29 29 5 F bracket 30 C Channel list favourite troubleshooting Channels favourite list install automatic manual rename reorder Clock computer format technical specifications Connections HDMI troubleshooting mains cord overview technical specifications troubleshooting connectors overview factory settings favourite list select set up 13 32 H 13 HDMI cable troubleshooting 21 22 23 23 16 30 33 24 24 30 33 20 14 13 33 I install channels automatic m
One-touch play One-touch standby 29 29 P PC pc connection picture format picture format change troubleshooting Picture settings PIN code 28 11 32 10 15 R reception remote control overview technical specifications 32 6 30 S settings sound settings assistant Smart settings software version sound settings 28 19 5 19 8 8 8 8 32 30 30 16 16 15 U USB listen to music view photos 19 18 V 12 10 10, 12 19 12 Video format video format technical specifications volume adjust 30 9 W Wallpaper T Table of Pages
36 EN
EN 37 English
Q41G4201813 5C © 2009 Koninklijke Philips Electronics N.V. All rights reserved.
