Register your product and get support at www.philips.
1. 2. 3. 4. 5. 6. 7. Lea estas instrucciones. Guarde estas instrucciones. Preste atención a todas las advertencias. Siga todas las instrucciones. No use este aparato cerca del agua. Límpielo solamente con un paño seco. No bloquee ninguno de los orificios de ventilación. Instálelo de acuerdo con las instrucciones de los fabricantes. 8.
6 1 Notice 4 2 Important 6 3 Your TV TV controls Remote control Remote control usage 4 Use your TV Switch your TV on Switch your TV to standby Switch your TV off Switch channels Watch connected devices Adjust TV volume 5 Use more of your TV Access TV menus Add device to the home menu Rename devices from the home menu Remove devices from the home menu Change picture and sound settings Create and use list of favorite channels Display the TV clock Use timers Lock unsuitable content View Scenea Chan
Notice 2011 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
English Copyright Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. HDMI, and HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries. All other registered and unregistered trademarks are the property of their respective owners.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.
Screen care • • • • • Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Unplug the TV before cleaning. Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products.
TV controls English 3 Your TV Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at www.philips.com/welcome. 1 2 3 4 a b +/-: Change volume. (Home): Access the home menu. c P/CH +/-: Change channels. d (Power): Switch the TV on or off.
Remote control a c 2 17 d 3 4 16 15 14 e 5 13 f 12 8 g • • • • • FIND Access the menu to select a TV channel list. (Home) Access the home menu. CH - / CH + (Previous/Next) Switch channels or navigate through menu pages, tracks, albums, or folders. SOURCE Select connected devices. Mute or restore audio. h +/• Adjust volume. 9 10 (Standby-On) Switch the TV on or to standby. b Play buttons • Control video or music. 1 6 7 • 11 i 0-9 (Numeric buttons) • Select channels.
English Remote control usage When you use the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects.
4 Use your TV Switch your TV to standby • This section helps you perform basic TV operations. Switch your TV on • Press the power switch on the TV. »» There is a short delay before the TV responds. Press (Standby-On) on the remote control again. »» The remote control sensor on the TV switches to red. Switch your TV off • Press the power switch on the TV again. »» The remote control sensor on the TV switches off.
• Press CH+ or CH- on the remote control. View channel grid You can view an overview of all available channels with the channel grid. 1 2 English Switch channels Press FIND. »» The channel grid appears. To watch a channel, select it, then press OK. Watch connected devices • Press P/CH +/-on the TV. Note •• Before you select a device as a source, switch the device on. Select a device from the source list 1 Press SOURCE.
Adjust TV volume • Press +/- on the remote control. • Press +/- on the TV. To mute or unmute sound • • Press Press 14 EN to mute the sound. again to restore the sound.
Add device to the home menu Access TV menus 1 2 3 Menus help you to install channels, change picture and sound settings and access other features. 1 Press . »» The menu screen appears. After you connect a device, add it to the home menu. 4 5 1 2 Press . Select [Add new device]. Follow the onscreen instructions to add the device to the home menu. »» The device is displayed in the home menu. To watch the device, switch it on, then select it in the home menu.
Rename devices from the home menu Remove devices from the home menu After you add a new device to the home menu, you can rename it to your preference. If a device is no longer connected to the TV, remove it from the home menu. Note •• The device name can be up to 16 characters long. 1 2 3 4 5 6 7 8 Press . 1 2 3 4 5 Select a device to rename. Press OPTIONS. »» The options menu appears. Select [Rename device], then press OK. To display the text input box, press OK.
• Use smart picture to apply pre-defined picture settings. 1 2 3 ADJUST. Press Select [Smart picture], then press OK. Select one of the following settings, then press OK. • [Personal]: Apply your customized picture settings. • [Vivid]: Rich and dynamic settings, ideal for daytime viewing. • [Football]: Ideal settings for football matches. • [Cinema]: Ideal settings for movies. • [Energy saving]: Settings that conserve the most energy.
Change picture format 1 2 3 Press ADJUST. Select [Picture format], then press OK. Select a picture format, then press OK. Summary of picture formats The following picture settings can be configured. Note •• Depending on the format of the picture source, some picture settings are not available. [Super zoom]: (Not for HD and PC mode.) Remove the black bars on the side of 4:3 broadcasts. There is minimal distortion. [4:3]: Show the classic 4:3 format.
Use smart sound to apply pre-defined sound settings. 1 2 3 ADJUST. Press Select [Smart sound], then press OK. Select one of the following settings, then press OK. • [Standard]: Settings that suit most environments and types of audio. • [News]: Ideal settings for spoken audio, such as news. • [Cinema]: Ideal settings for movies. • [Sports]: Ideal settings for sports programs.
Manage the favorites list 1 2 3 4 5 While you watch TV, press FIND. »» The channel matrix menu appears. Press OPTIONS. Select [Select list] > [All], then press OK. Press OPTIONS. Select [Mark as favorite] or [Unmark as favorite], then press OK. »» The channel is added or removed from the favorite list. Note •• All favorite channels are marked by an asterisk in the channel grid. Display the TV clock You can display a clock on the TV screen. Set the TV clock manually 1 2 3 4 5 6 Press .
Lock unsuitable content You can set timers to switch the TV to standby at a specified time. You can prevent your children from watching certain programs or channels by locking the TV controls. Tip •• Set the TV clock before you use timers. Automatically switch the TV to standby (sleep timer) Sleep timer switches the TV to standby after a pre-defined duration. Tip •• You can switch off your TV earlier or reset the sleep Set or change code 1 2 3 4 Press .
Lock or unlock one or more channels 1 2 3 4 5 6 Press . Select [Setup] > [Channel settings] > [Child lock] > [Channel lock]. 1 2 The first time you lock or unlock a channel, you are prompted to enter your PIN code. »» A list of channels is displayed. Select the channel that you want to lock or unlock, then press OK. »» Locked channels are marked. Repeat the process to lock or unlock more channels. To activate the locks, switch the TV on and off.
Change language Depending on your broadcaster, you can change the closed captions, audio language, or both, for a TV channel. 1 2 3 Change menu language 1 2 3 Press . Select [Setup] > [TV settings] > [Preferences] > [Menu language], then press OK. Select a language, then press OK. Change audio language You can change the audio language if it is available from your broadcaster. 1 2 While you watch TV, press OPTIONS. Select [SAP], select the language, then press OK.
View a slide show of your photos 1 • • When a full screen image of a photo is displayed, press OK. »» A slide show begins from the selected photo. Press the following buttons to control play: • to play. • to pause. • or to play the previous or next photo. • to stop. To return, press . Change slide show settings 1 2 3 While you view a slide show, press OPTIONS. »» The slide show options menu is displayed. Select one of the following, then press OK. • [Start/stop slideshow]: If available, stop music.
1 While you play video, press OPTIONS to access one of the following settings, then press OK. • [Stop playback] / [Start playback]: Stop or start video play. • [Repeat] / [Play once]: Play repeatedly or once. • [Shuffle on] / [Shuffle off]: Play at random or sequentially. • [Small Screen] / [Full Screen]: If available, show video in its original (native) size, or expand it to fit the full screen. • [Show info]: Display the file name.
Step 2: Download and update the latest software version 1 2 3 4 5 6 7 Connect a USB storage device. Press . Select [Setup] > [Update software]. Follow the instructions to load a file onto your USB storage device. Connect the USB storage device to your computer, then double-click the file. »» A Web page is launched. Change TV preferences Use the preferences menu to customize your TV settings. 1 2 3 Follow the instructions in the Web page.
English Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list. 1 2 3 4 While you watch TV, press . Select [Setup] > [Watch demo], OK. Select a demo and press OK to view it. To exit, press . Reset the TV to factory settings You can restore the default picture and sound settings of your TV. The channel installation settings remain the same. 1 2 3 4 Press .
6 Install channels The first time you setup your TV, you are prompted to select a menu language and to install TV channels. Afterward, you can re-install channels and customize channels in other ways. Automatically install channels You can search and store channels automatically. 1 2 3 4 5 28 Press . Rename channels You can rename channels. The name appears when you select the channel. 1 2 3 4 5 6 Select [Setup] > [Search for channels], then press OK. Select [Start], then press OK.
English Hide channels To prevent unauthorized access to channels, hide them from the channel list. 1 2 3 4 While you watch TV, press FIND. »» The channel matrix menu is displayed. Select the channel to hide. Press OPTIONS. »» The channel options menu is displayed. Select [Hide channel], then press OK. »» The channel is marked as hidden. Unhide channels To prevent unauthorized access to channels, hide them from the channel list. 1 2 3 4 5 6 While you watch TV, press FIND.
7 Connect devices This section describes how to connect devices with different connectors. For the location of these connectors on your TV, see the quick start guide. More examples of connections with other devices are provided in the quick start guide. Back connectors a HDMI 1 Digital audio and video input from highdefinition digital devices such as Blu-ray players. Note •• You can use different types of connectors to connect a device to your TV.
TV ANTENNA d CVI 1 (Y Pb Pr and AUDIO L/R) / CVI 2 (Y/Video Pb Pr and AUDIO L/R) Analog audio and video input from analog or digital devices such as DVD players or game consoles. e AV out Digital audio output to home theaters and other digital audio systems. AUDIO IN f SERV. U For use by service personnel only. EN 31 English c ANTENNA Signal input from an antenna or cable.
Side connector a USB Data input from USB storage devices. d HDMI Digital audio and video input from highdefinition digital devices such as Blu-ray players. Connections via DVI or VGA require an additional audio cable (see ‘Connect a computer’ on page 32). b (Headphone) Stereo audio output to headphones or earphones. c AV IN (VIDEO and AUDIO L/R) Analog audio and video input from analog or digital devices such as DVD players, satellite receivers and VCRs.
PC IN AUDIO DVI HDMI cable and HDMI-DVI adaptor • Get the most out of your HDMI-Consumer Electronic Control (CEC) compliant devices with Philips EasyLink enhanced control features. If your HDMI-CEC compliant devices are connected through HDMI, you can control them at the same time with your TV remote control.
Use one-touch play 1 2 The first time you use one-touch play: Press , then select [Setup] > [TV settings] > [EasyLink] > [On]. Press play on your device. »» The TV automatically switches to the correct source. Use one-touch standby When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode. 1 2 34 The first time you use one-touch standby: Press , then select [Setup] > [TV settings] > [EasyLink] > [On].
Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Supported display resolutions Computer formats • Resolution - refresh rate: • 640 x 480 - 60Hz • 800 x 600 - 60Hz • 1024 x 768 - 60Hz • 1280 x 1024 - 60 Hz • 1360 x 768 - 60Hz Video formats • Resolution - refresh rate: • 480i - 60Hz • 480p - 60Hz • 576i - 50Hz • 576p - 50Hz • 720p - 50Hz, 60Hz • 1080i - 50Hz, 60Hz • 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz.
Supported TV mounts Product specification To mount the TV, purchase a Philips TV mount or a compatible TV mount. Design and specifications are subject to change without notice. Warning •• Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. Before you mount, perform these steps: 1 2 3 To prevent damage to cables and connectors, leave a clearance of at least 2.
This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: •• Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. •• Check that the power cable is securely connected. The remote control is not working properly: •• Check that the remote control batteries are correctly inserted according to the +/- orientation. •• Replace the remote control batteries if they are flat or weak.
There is poor picture quality from connected devices: •• Check that the devices are connected properly. •• Check that the picture settings are correctly set. The TV did not save your picture settings: • Check that the TV location is set to the home setting. This mode offers you the flexibility to change and save settings. The picture does not fit the screen; it is too big or too small: •• Try using a different picture format.
English Contact us If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in this user manual. Warning •• Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV or void your warranty. Note •• Make a note of your TV model and serial number before you contact Philips.
10 Index A age rating analog channels closed captions C care channels channel list favourites hide or unhide install (automatic) rename switch child lock clock closed captions computer, see PC connect connect, PC connect, USB controls D demo devices add watch digital channels closed captions dimensions display, wallpaper F factory settings favorites list, add 21, 22 23 7 13 19 19 28 28 13 21, 22 20 23 32 32 23 9 27 15 13 23 36 22 E EasyLink enable environmental care end of use recycle while you w
S T troubleshoot V volume W wall mount 22 22 7 22 English Scenea, see screen saver Scenea, switch on screen care screen saver settings assistant picture sound shop mode sleeptimer smart picture smart sound software USB update version sound settings specifications standby switch switch TV on or off 16 17 19 26 21 17 19 17 25 25 19 35 12 12 12 12 37 14 36 EN 41
EN
EN English
EN
© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
