221S6 221B6 www.philips.
Table of Contents 1. Important �����������������������������������������������1 1.1 Safety precautions and maintenance �1 1.2 Notational Descriptions ���������������������������2 1.3 Disposal of product and packing material ���������������������������������������������������������������3 2. Setting up the monitor �����������������������4 2.1 Installation ���������������������������������������������������������4 2.2 Operating the monitor ������������������������������8 2.
1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operating of your monitor.
1. Important • Temperature: 0-40°C 32-104°F 1.2 Notational Descriptions • Humidity: 20-80% RH The following subsections describe notational conventions used in this document. Important information for Burn-in/Ghost image • • Notes, Cautions and Warnings Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
1. Important making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company. 1.
2. Setting up the monitor 221S6LC: 2. Setting up the monitor 221S6 2.1 Installation Package contents 221S6LS: 221S6 使用 前请阅读使用说明 i © 2 015 Ko n User’s Manual Monitor drivers 保留备用 e nk lijk .A N.V ips Phil ll r ts ig h er .U na u th si o n s re ve d Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. ori zed d up l ic at io n Mad e is a vi o lati on o f applica ble laws.
2. Setting up the monitor Install base stand 221B6LPC: 221S6LS: 221B6 1. Place the monitor face down on a soft and smooth surface to avoid scratching or damaging the screen. 使用 前请阅读使用说明 i © 2 015 Ko n User’s Manual Monitor drivers 保留备用 e nk lijk .A N.V ips Phil ll r ts ig h er .U na u th si o n s re ve d Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.
2. Setting up the monitor 221S6LC, 221B6LPC: Connecting to your PC 1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen. 221S6LS: 1 3 2 4 1 2. Hold the stand with both hands. (1) G ently attach the stand to the VESA mount area until the latch locks the stand. 3 2 1 AC power input 2 VGA input 3 DVI input (2) Gently attach the base to the stand.
2. Setting up the monitor 221B6LPC: Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 4 1 3 2 3. Connect the monitor signal cable to the video connector on the back of your computer. 6 5 1 4. Plug the power cord of your computer and your monitor into a nearby outlet. 3 2 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.
2. Setting up the monitor 221B6LPC: 2.2 Operating the monitor Front view product description 221S6LS, 221S6LC: 3 3 7 6 7 6 5 4 2 5 4 2 1 Switch monitor’s power ON and OFF. 1 Access the OSD menu. Confirm the OSD adjustment. Switch monitor’s power ON and OFF. Adjust the OSD menu. Access the OSD menu. Confirm the OSD adjustment. SENSOR PowerSensor Adjust the OSD menu. Adjust the speaker volume. Select the SmartPower control level. Return to previous OSD level. SmartImage hot key.
2. Setting up the monitor Description of the On Screen Display The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
2. Setting up the monitor Swivel Resolution notification This monitor is designed for optimal performance at its native resolution, 1920 × 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 × 1080 @ 60 Hz for best results. +75 -75 Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.
2. Setting up the monitor 221S6LS: 2.3 Remove the Base Assembly for VESA Mounting 1. Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen. Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 221S6LC, 221B6LPC: 1. Extend the monitor base to its maximum height. 2. Press the locking clips to detach the base stand away from the base column. 1 2.
3. Image Optimization 2. Keep pressing to toggle among Office, Photo, Movie, Game, Economy and Off. 3. Image Optimization 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press "OK" to make confirmation. There are six modes to select: Office, Photo, Movie, Game, Economy and Off. 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time.
3. Image Optimization • Economy: Under this profile, brightness, contrast are adjusted and backlighting finetuned for just right display of everyday office applications and lower power consumption. • Off: No optimization by SmartImage. 3.
4. PowerSensor™ is within 100 cm or 40 inches of the display, step up signal strength when wearing black or other dark clothes. 4. PowerSensor™ 221B6LPC • • • Hot key How does it work? PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect userpresence. When the user is in front of the monitor, the monitor operates normally, at the predetermined settings that the user has set- i.e.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight Panel Size Aspect Ratio Pixel Pitch SmartContrast Response Time (typ.) Optimum Resolution Viewing Angle (typ.) Display Colors Vertical Refresh Rate Horizontal Frequency sRGB Connectivity Signal Input Input Signal Audio In/Out Convenience Built-in speaker LCD W-LED System 21.5" W (54.6 cm) 16:9 0.248(H) mm x 0.248(V) mm 20,000,000:1 5 ms 1920 x 1080 @ 60 Hz 170° (H) / 160° (V) @ C/R > 10 16.
5. Technical Specifications Sleep (Standby) Off Heat Dissipation* Normal Operation Sleep (Standby) Off On Mode(ECO mode) Power LED indicator Power Supply Power(221B6LPC) Consumption Normal Operation (typ.
5. Technical Specifications Atmospheric pressure (operation) Temperature range (Non-operation) Relative humidity (Non-operation) Atmospheric pressure (Non-operation) Environmental and energy ROHS EPEAT Packaging Specific Substances EnergyStar Compliance and standards Regulatory Approvals Cabinet Color Finish 700 to 1060hPa -20°C to 60°C 10% to 90% 500 to 1060hPa YES Gold (www.epeat.
5. Technical Specifications 5.1 Resolution & Preset Modes Maximum Resolution 1920 x 1080 @ 60 Hz (analog input) 1920 x 1080 @ 60 Hz (digital input) Recommended Resolution 1920 x 1080 @ 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 37.88 800 x 600 60.32 46.88 800 x 600 75.00 48.36 1024 x 768 60.00 60.02 1024 x 768 75.03 44.77 1280 x 720 59.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7. Customer care and warranty black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. 7. Customer care and warranty Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products.
7. Customer care and warranty Proximity of Pixel Defects Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'.
7. Customer care and warranty 7.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
7. Customer care and warranty Spain Mainteq +34 902 888 785 € 0.
7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center CSP Consumer care number Belarus NA IBA +375 17 217 3386 +375 17 217 3389 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA MR Service Ltd +385 (01) 640 1111 Czech Rep.
7. Customer care and warranty Contact Information for APMEA region: Country Australia ASP AGOS NETWORK PTY LTD Consumer care number Opening hours 1300 360 386 Mon.~Fri. 9:00am-5:30pm New Zealand Visual Group Ltd. 0800 657447 Mon.~Fri. 8:30am-5:30pm Hong Kong Macau Company: Smart Pixels Technology Ltd. Hong Kong: Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 Mon.~Fri. 9:00am-6:00pm Sat. 9:00am-1:00pm India REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Mon.~Fri.
8. Troubleshooting & FAQs satisfactory, you can do manual adjustments via the OSD menu. 8. Troubleshooting & FAQs Note The Auto Function is not applicable in DVIDigital mode as it is not necessary. 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
8. Troubleshooting & FAQs • The "power on" light is too strong and is disturbing Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode. • You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. Image appears blurred, indistinct or too dark • Adjust the contrast and brightness on On-Screen Display.
8. Troubleshooting & FAQs Q3: What are the .inf and .icm files on the user manual? How do I install the drivers (.inf and .icm)? Ans.: These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions.
8. Troubleshooting & FAQs Q11: What is Image Sticking, or Image Burnin, or After Image, or Ghost Image in LCD panels? Attention Monitor control unlocked Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology.
© 2015 Koninklijke Philips N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Specifications are subject to change without notice.
