e-Manual Philips LCD Monitor Electronic User’s Manual file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/INDEX.
Safety and Troubleshooting Information Safety Precautions and Maintenance FAQs Troubleshooting Regulatory Information Safety and Troubleshooting Information Safety precautions and maintenance Other Related Information WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Safety and Troubleshooting Information ● ● Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or extreme cold. In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges. ❍ Temperature: 0-40°C 32-95°F ❍ Humidity: 20-80% RH IMPORTANT: Always activate a moving screen saver program when you leave your monitor unattended.
About This Manual About This Guide About This Manual Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD monitor's features, setup, operation and other important information. Its contents are identical to the information in our printed version.
About This Manual Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
Product Information Your LCD Monitor Smartimage Product Information SmartContrast SmartSaturate SmartSharpness Lead-free Product Your LCD monitor Congratulations on your purchase and welcome to Philips. To fully benefit from the support that Philips offers, register your product at. www.philips.
Product Information 1. Press to launch the SmartImage on screen display; 2. Keep press 3. The SmartImage on screen display will remain on screen for 5 seconds or you can also press”OK” to make confirmation. 4. When SmartImage is enabled, the sRGB scheme is disabled automatically. To use sRGB you need to disable SmartImage with the button at the front bezel of your monitor.
Product Information 1. Office Work: Enhances text and dampens brightness to increase readability and reduce eye strain. This mode 2. 3. 4. 5. significantly enhances readability and productivity when you're working with spreadsheets, PDF files, scanned articles or other general office applications.
Product Information How does it work? When you active SmartContrast which will analysis the content you are displaying in real time to adjust colors and control backlight intensity. This function can obviously enhance contrast in dynamic for more entertainment fun when viewing videos or playing games.
Product Information Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.Philips complies with the European Community stringent RoHS Directive mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips, you can be confident that your display device does not harm the environment.
Product Information - Video - Sync 75 ohm 2.2K ohm Input signal levels 0.7 Vpp Sync input signal Separate sync Composite sync Sync on green Sync polarities Positive and negative * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes A. Maximum Resolution - For 220SW9 1680 x 1050 at 60 Hz (analog input) 1680 x 1050 at 60 Hz (digital input) B.
Product Information H. freq (kHz) Resolution V. freq (Hz) 31.469 640*350 70.086 31.469 720*400 70.087 31.469 640*480 59.940 35.000 640*480 67.000 37.500 640*480 75.000 35.156 800*600 56.250 37.879 800*600 60.317 46.875 800*600 75.000 48.363 1024*768 60.004 60.023 1024*768 75.029 63.981 1280*1024 60.020 79.976 1280*1024 75.025 55.469 1440*900 59.901 55.935 1440*900 59.887 70.635 1440*900 74.984 65.290 1680*1050 60.000 64.674 1680*1050 60.000 82.
Product Information Switch Off OFF - - < 0.8 W Off This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications Tilt -5°+2/-0 ~+ 20°+3/-0 Power supply 100 ~ 240 VAC, 50/60 Hz Power consumption 45W* (typ.
Product Information 6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield 7 DDC Data 8 No connect 15 Ground (for +5V) 23 T.M.D.S. Clock+ 16 Hot Plug Detect 24 T.M.D.S. Clock- 2.The 15-pin D-sub connector (male) of the signal cable: Pin No. Assignment Pin No. Assignment 1 Red video input 9 DDC + 5 V 2 Green video input/SOG 10 Logic ground 3 Blue video input 11 Ground 4 Sense (GND) 12 Serial data line (SDA) 5 Cable detect (GND) 13 H. Sync / H+V.
Product Information Follow the links to see various views of the monitor and its components.
Installing Your LCD Monitor Installing Your LCD Monitor Front View Produt Description Connecting to Your PC Front View Product Description The Base Getting Started Optimizing Performance 1 To switch monitor's power On and Off 2 To access OSD menu 3 To adjust the OSD menu 4 To adjust brightness of the display 5 鶉佌 Input To change the signal input source. 6 Automatically adjust the horizontal position, vertical position, phase and clock settings / Return to previous OSD level. 7 SmartImage.
Installing Your LCD Monitor RETURN TO TOP OF THE PAGE Rear View 1 VGA input 2 DVI-D input (available for selective models) 3 AC power input 4 Kensington anti-thief lock RETURN TO TOP OF THE PAGE Optimizing Performance ● 鶉佌 For best performance, ensure that your display settings are set at 1680x1050, 60Hz.
Installing Your LCD Monitor Note: You can check the current display settings by pressing the 'OK' button once. The current display mode is shown in OSD main controls called RESOLUTION.
On-Screen Display Description of the On-Screen Display The OSD Tree On-Screen Display Description of the On Screen Display What is the On-Screen Display? On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below : Basic and simple instruction on the control keys.
On-Screen Display The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.
On-Screen Display Resolution notification This monitor is designed for optimal performance at its native resolution, 1680X1050@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1680x1050@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. RETURN TO TOP OF THE PAGE file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/osd/osddesc.
Customer Care & Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria Belgium Denmark France Germany Greece Finland Ireland Italy Luxembourg the Netherlands Norway Portugal Sweden Switzerland Spain United Kingdom EASTERN EUROPE: Czech Republic Hungary Poland Russia Slovakia Slovenia Turkey LATIN AMERICA: Antilles Argentina Brasil Chile Colombia Mexico Paraguay Peru Uruguay Venezuela NORTH AMERICA: Canada USA PACIFIC: Australia
Glossary Glossary ABCDEFGHIJKLMNOPQRSTUVWXYZ A Active matrix This is a kind of liquid crystal display structure in which switching transistors are attached to each pixel to control the on/off voltage. It produces a brighter and sharper display with a broader viewing angle than a passive matrix display. Also refer to TFT (thin film transistor). Amorphous silicon (a-Si) A semiconductor material that is used to make the thin film transistors (TFTs) layer of an active matrix LCD.
Glossary The light source for a transmissive LCD. There are two techniques used in nowaday LCD designs. Most TFT LCD panels use CCFLs (cold cathode fluorescent light) and a diffuser panel directly behind the liquid crystal layer. New technology using Light Emitting Diodes (LED) are still under development. Brightness The dimension of color that is referred to an achromatic scale, ranging from black to white, also called lightness or luminous reflectance.
Glossary Contrast ratio The ratio of luminance between the brightest white pattern and the darkest black pattern. RETURN TO TOP OF THE PAGE D D-SUB A VGA Analog input connector. Your monitor comes with a D-Sub cable. Digital Visual Interface (DVI) (available for selective models) The Digital Visual Interface (DVI) specification provides a high-speed digital connection for visual data types that is display technology independent.
Glossary An energy conservation program launched by the US Environmental Protection Agency (EPA), promotes the manufacture and marketing of energy-efficient office automation equipment. Companies joining this program, must be willing to commit themselves to manufacture one or more products capable of going into a low -power state (< 30 W) either after a period of inactivity, or after a predetermined time selected by the user.
Glossary IPS (In Plane Switching) A technique of improving the viewing angle of an LCD where the liquid crystal molecules are switched in the plane of the LCD layer rather than vertical to it. L LCD (liquid crystal display) A display composed of liquid crystal suspended between two transparent sheets. The display is composed thousands of pixels which can be turned on or off with electrical stimulation. Thus, colorful images/texts can be generated.
Glossary P Pixel PICture Element; the smallest element on a computerized CRT or LCD image, and hence a display. Polarizer A light filter which only allows light waves of a certain rotation through. Polarized material with perpendicular filtering is used in LCDs to enclose the liquid crystal. The liquid crystal is then used as the medium which twists the light waves 90° in order to allow the light to pass through or not. R Refresh rate The number of times per second the screen is refreshed or redrawn.
Glossary SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized LCD display performance.
Glossary TFT(thin film transistor) Usually made from amorphous silicon (a-Si) and used as a switch to a charge storage device located below each sub-pixel on an active matrix LCD.
Glossary Hubs are a key element in the plug-and-play architecture of USB. The Figure shows a typical hub. Hubs serve to simplify USB connectivity from the user's perspective providing low cost and complexity. Hubs are wiring concentrators and enable the multiple attachment characteristics of USB. Attachment points are referred to as ports. Each hub converts a single attachment point into multiple attachment points. The architecture supports concatenation of multiple hubs.
Glossary Downstream The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic from the hub. Downstream ports receive upstream data traffic. Upstream The direction of data flow towards the host. An upstream port is the port on a device electrically closest to the host that generates upstream data traffic from the hub. Upstream ports receive downstream data traffic.
Download and Print Download and Print Installing your LCD monitor driver Download and Printing Instructions Installing Your LCD monitor driver System requirements: ● ● PC running Windows 95, Windows® 98, Windows® 2000 , Windows® Me, Windows® XP, Windows® Vista or later Find your driver ".inf/.icm/.cat" at : /PC/drivers/ Read the "Readme.txt" file before installing. This page provides an option to read the manual in .pdf format.
Download and Print Printing instructions: To print the manual: With the manual file open, follow your printer's instructions and print the pages you need. RETURN TO TOP OF THE PAGE file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/download/download.
FAQs (Frequently Asked Questions) Safety and Troubleshooting FAQs (Frequently Asked Questions) General FAQs Screen Adjustments Compatibility with Other Peripherals LCD Panel Technology Ergonomics, Ecology and Safety Standards Troubleshooting Regulatory Information Other Related Information General FAQs Q: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? A: Recommended video mode for Philips 22": 1680x1050 @60Hz. 1.
FAQs (Frequently Asked Questions) Q: How do I adjust the resolution? A: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q: What if I get lost when I am making monitor adjustments? A: Simply press the OK button, then select 'Reset' to recall all of the original factory settings.
FAQs (Frequently Asked Questions) from the top to the bottom of the screen determines flicker, an active matrix display uses an active element (TFT) to control each individual pixel and the refresh rate is therefore not really applicable to LCD technology. Q: Will the LCD screen be resistant to scratches? A: A protective coating is applied to the surface of the LCD, which is durable to a certain extent (approximately up to the hardness of a 2H pencil).
FAQs (Frequently Asked Questions) *A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K. Q: Can the Philips LCD Monitor be mounted on the wall? A: Yes. Philips LCD monitors have this optional feature.
FAQs (Frequently Asked Questions) Q: Can I connect my LCD monitor to any PC, workstation or Mac? A: Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your Philips sales representative for more information. Q: Are Philips LCD monitors Plug-and-Play? A: Yes, the monitors are Plug-and-Play compatible with Windows® 95, 98, 2000, XP and Vista.
FAQs (Frequently Asked Questions) LCD Panel Technology Q: What is a Liquid Crystal Display? A: A Liquid Crystal Display (LCD) is an optical device that is commonly used to display ASCII characters and images on digital items such as watches, calculators, portable game consoles, etc. LCD is the technology used for displays in notebooks and other small computers. Like light-emitting diode and gas-plasma technologies, LCD allows displays to be much thinner than cathode ray tube (CRT) technology.
FAQs (Frequently Asked Questions) vertical/horizontal frequency for this dot clock is 60Hz/48kHz, the optimum frequency for this monitor is 60Hz. Q: What kind of wide-angle technology is available? How does it work? A: The TFT LCD panel is an element that controls/displays the inlet of a backlight using the dual-refraction of a liquid crystal.
FAQs (Frequently Asked Questions) A: The CE (Conformité Européenne) mark is required to be displayed on all regulated products offered for sale on the European market. This 'CE' mark means that a product complies with the relevant European Directive. A European Directive is a European 'Law' that relates to health, safety, environment and consumer protection, much the same as the U.S. National Electrical Code and UL Standards. Q: Does the LCD monitor conform to general safety standards? A: Yes.
Troubleshooting •Safety and Troubleshooting •FAQs •Common Problems •Imaging Problems •Regulatory Information •Other Related Information Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
Troubleshooting ● Display position is incorrect ● ● Image vibrates on the screen Press the Auto button. Adjust the image position using the Phase/Clock of Setup in OSD Main Controls. Check that the signal cable is properly connected to the graphics board or PC. Vertical flicker appears ● ● Press the Auto button. Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls.
Troubleshooting Green, red, blue, dark, and white dots remains ● ● Adjust blue "power on" light The remaining dots are normal characteristic of the liquid crystal used in todays technology. Adjust blue "power on" light using the power LED of Setup in OSD Main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.
Regulatory Information TCO'03 Information Regulatory Information Recycling Information for Customers Model ID: Model No: Waste Electrical and Electronic Equipment-WEEE 220SW9 HWS9220I CE Declaration of Conformity Energy Star Declaration TCO'03 Information Federal Communications Commission (FCC) Notice (U.S. Only) Congratulations! The display you have just purchased carries the TCO'03 Displays label.
Regulatory Information www.tcodevelopment.com RETURN TO TOP OF THE PAGE Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
Regulatory Information This marking on the product or on its packaging illustrates that, under European Directive 2002/96/EG governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection.
Regulatory Information This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS. Time settings are adjusted from the system unit by software. VESA State LED Indicator Power Consumption Normal operation ON (Active) Blue < 45W (typ.) Power Saving Alternative 2 One step Sleep Blue Blinking <1W Switch Off Off < 0.
Regulatory Information THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCECAUSING EQUIPMENT REGULATIONS. RETURN TO TOP OF THE PAGE FCC Declaration of Conformity Trade Name: Philips Responsible Party: Philips Consumer Electronics North America P.O. Box 671539 Marietta , GA 30006-0026 1-888-PHILIPS (744-5477) Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules.
Regulatory Information Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.
Regulatory Information The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible.
Regulatory Information Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.
Regulatory Information ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND. RETURN TO TOP OF THE PAGE End-of-Life Disposal Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer.
Regulatory Information The wires in the mains lead are coloured in accordance with the following code: BLUE - "NEUTRAL" ("N") BROWN - "LIVE" ("L") GREEN & YELLOW - "GROUND" ("G") 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter "G" or by the Ground symbol AND YELLOW. or coloured GREEN or GREEN 2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK. 3.
Regulatory Information RETURN TO TOP OF THE PAGE Safety Information: Electric, Magnetic and Electromagnetic Fields ("EMF") 1. Philips Royal Electronics manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electro magnetic signals. 2.
Other Related Information Safety and Troubleshooting Other Related Information FAQs Troubleshooting Regulatory Information Information for Users in the U.S Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.
Philips Pixel Defect Policy Product Features Philips Pixel Defect Policy Technical Specifications Resolution & Preset Modes Automatic Power Saving Physical Specification Pin Assignment Product Views Philips' Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control.
Philips Pixel Defect Policy defects and several types of sub pixel defects within each category. Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. That is, a bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern.
Philips Pixel Defect Policy Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.
Philips Pixel Defect Policy Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect RETURN TO TOP OF THE PAGE file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/product/pixel.
SmartManage Product Information SmartManage & SmartControl II (Selective Models) Philips Pixel Defect Policy SmartManage Features and Benefits Philips SmartControl ll System support and requirement Installation Start to use Q&A Introduction Philips SmartManage is an advanced solution for users, corporate/institution IT administrator in particular, to manage their Philips monitors as part of the asset management environment.
SmartManage SmartManage Features and Benefits The Philips SmartManage is a working console for IT management to gather monitors assets information, run asset report, control assets security, monitor assets security, and issue instant messages to monitor users. Philips SmartManage includes the following major features: 1. 2. 3. 4. Provides an additional security measure that helps corporate users safeguard their investment.
SmartManage 2. Installer – Install Shield Legal ● ● Choose "I accept" for installation process. Cancel prompts user if you want to cancel installation. file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/product/SMART.
SmartManage 3. Installer – Install Shield Program Files ● Check the box if you wants to install SmartManage Lite Asset Management services. Personal user usually not need to active this function.Read SmartManage section in this manual before you choose SmartManage Lite function. file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/product/SMART.
SmartManage 4. Installer – Installation Process ● ● ● Follow the instruction and complete the installation. You can launch after installation complete. If you want to launch later, you can either click the shortcut on desktop or toolbar. file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/product/SMART.
SmartManage file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/product/SMART.
SmartManage file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/product/SMART.
SmartManage Start to use: 1. First launch –Wizard ● ● ● ● The first time after installation of SmartControl II, it will automatically go to Wizard for first time launch. The wizard will guide you through adjustment your monitor performance step by step. You can go to Plug-in menu to launch wizard later on as well. You can adjust more options without wizard by Standard pane.
SmartManage 2. Start with Standard pane: Adjust menu: ● ● ● Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation.
SmartManage Color menu: ● ● ● Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage (Please refer to SmartImage section). You can follow the instruction and do the adjustment. Refer to below table for sub-menu item base on your input.
SmartManage Optional Menu ● ● ● Option Menu let you to activate some features like AutoPivot, Preference, Input Selection and Audio Function. You can follow the instruction and do the adjustment. Refer to below table for sub-menu item base on your input.
SmartManage ● ● ● Help Menu will give you some information of Manual, Update, ID, System ID and version. If you ask for technical support. It will automatically generate a report for Philips supporting to understand your enviorment by click "Tech. Support". Refer to below table for sub-menu item base on your input.
SmartManage ● ● ● ● ● ● Plug Ins Menu will allow you to have more add on features if applicable. PIP and Zoning functions will only support for the models with Video inputs. SmartManage Lite for Asset Management will only be supported if you activate it when installation. Personal user usually will not need this function. Please follow the screen instruction for Theft deterrence function. You need to have Internet access to register your PIN. We also suggest you to have at least 10 to 15 mins.
SmartManage Example for on line register Theft Deterrence PIN file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/product/SMART.
SmartManage Q&A Q1. What is the difference between SmartManage, SmartControl? A. SmartManage is a remote management/control software for IT managers to manage monitors across the network SmartControl is a control panel extension, which helps users to adjust monitor performances and settings by a software interface, instead of the hardware buttons at the front bezel of the monitors. Q2. I change the monitor on a PC to a different one and the SmartControl becomes un-usable, what do I do? A.
SmartManage Q7. In a monitor with the Smartlmage feature, the sRGB scheme of color temperature function in SmartControl is not responding, why? A. When Smartlmage is enabled, the sRGB scheme is disabled automatically. To use sRGB, you need to disable Smartlmage with the button at the front bezel of your monitor. RETURN TO TOP OF THE PAGE file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/product/SMART.
Connecting to Your PC Connecting to Your PC Front View Product Description Accessory Pack Connecting to Your PC Accessory Pack Unpack all the parts. Getting Started Optimizing Performance The base Power cord DVI cable (Optional) EDFU pack VGA cable RETURN TO TOP OF THE PAGE Connecting to Your PC file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/install/connect.
Connecting to Your PC 1) Connect the power cord to the back of the monitor firmly. (Philips has pre-connected VGA cable for the first installation. *available for selective models *available for selective models file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/install/connect.
Connecting to Your PC 2) Connect to PC (a) Turn off your computer and unplug its power cable. (b) Connect the monitor signal cable to the video connector on the back of your computer. (c) Plug the power cord of your computer and your monitor into a nearby outlet. (d) Turn on your computer and monitor. If the monitor displays an image, installation is complete. RETURN TO TOP OF THE PAGE file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/install/connect.
The Base The Base Front View Product Description Accessory Pack Attach the Base Stand Connecting to your PC 1) Place the monitor face down on a smooth surface taking care to avoid scratching or damaging the screen. Getting Started Optimizing Performance Attach the Base Stand Detach the Base Stand Remove the Base 2) Hold the monitor base with both hands and firmly insert the base stand into the base column. file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/install/base.
The Base RETURN TO TOP OF THE PAGE Detach the Base Stand Place the monitor face on a safe surface, push down on the release button and pull the base stand away from the monitor body. RETURN TO TOP OF THE PAGE Remove the Base Condition: ● for VESA standard mounting applications Remove the 4 screws and then remove the base from the LCD monitor. file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/install/base.
The Base Note: This monitor accepts a 100mmx100mm VESA-Compliant mounting interface. file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/220SW9/install/base.
The Base RETURN TO TOP OF THE PAGE
Getting Started Your LCD Monitor : Front View Product Description Setting Up and Connecting Your Monitor Getting Started Optimizing Performance Getting Started Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP/Vista or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 95/98/2000/Me/XP/Vista. This information file ( .
Getting Started 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' 6. 7. 8. 9. 10. 11. - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.
Getting Started appropriate drive F: (CD-ROM Drive). 11. Click on the 'Open' button, then click the 'OK' button. 12. Select your monitor model and click on the 'Next' button. - If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP' message, please click on the 'Continue Anyway' button. 13. Click on the 'Finish' button then the 'Close' button. 14. Click on the 'OK' button and then the 'OK' button again to close the Display_Properties dialog box.
Your Philips F1rst Choice Warranty Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact the Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty.
Your Philips F1rst Choice Warranty ● ● ● ● Reception problems caused by signal conditions or cable or antenna systems outside the unit; Defects caused by abuse or misuse of the monitor; Product requires modification or adaptation to enable it to comply with local or national technical standards, which apply in countries for which the product was not originally designed, manufactured, approved and/or authorized. Therefore always check whether a product can be used in a specific country.
Your Philips F1rst Choice Warranty file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/warranty/war_1st.
Your Guarantee in Central and Eastern Europe Your Guarantee in Central and Eastern Europe Dear Customer, Thank you for purchasing this Philips product, which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 36 months from date of purchase.
Your Guarantee in Central and Eastern Europe become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured. Therefore always check whether a product can be used in a specific country. Just a click away In case of any problems, we advise you to read the operating instructions carefully or go to the www. philips.com/support website for additional support.
International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase.
International Guarantee file:///C|/Documents%20and%20Settings/Fang.Lee/%AE%E0%AD%B1/ENGLISH/warranty/war_intl.
United States Guarantee Your Philips F1rst Choice Warranty(USA) Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty.
United States Guarantee Your warranty does not cover: ● ● ● ● ● ● labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics. reception problems caused by signal conditions or cable or antenna systems outside the unit.
United States Guarantee (877) 835-1838 or (919) 573-7855 (In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.) TO GET WARRANTY SERVICE IN CANADA...
United States Guarantee ❍ ● ● ● Fax/Modem/Internet program? Other cards installed Having the following information available will also help speed up the process: Your proof of purchase indicating: date of purchase, dealer name, model and product serial number. The full address to which the swap model should be delivered. Just a phone call away Philips customer help desks are located worldwide. Within the U.S.
Consumer Information Centers Consumer Information Centers Antilles Argentina Australia Bangladesh Brasil Canada Chile China Colombia Belarus Bulgaria Croatia Czech Republic Estonia Dubai Hong Kong Hungary India Indonesia Korea Latvia Lithuania Malaysia Mexico Morocco New Zealand Pakistan Paraguay Peru Philippines Romania Russia Serbia & Montenegro Singapore Slovakia Slovenia South Africa Taiwan Thailand Turkey Ukraine Uruguay Venezuela Eastern Europe BELARUS Technical Center of JV IBA M. Bogdanovich str.
Consumer Information Centers ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY General Consumer Information Center 0680018544 (Local call tariff) Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: inbox@serware.hu www.serware.hu HUNGARY General Consumer Information Center 0680018544 (Local call tariff) Profi Service Center Ltd. 123 Kulso-Vaci Street , H-1044 Budapest ( Europe Center ) Hungary Tel: +36 1 814 8080 m.
Consumer Information Centers LITHUANIA ServiceNet LT Gaiziunu G. 3 LT - 3009 KAUNAS Tel: +370 7400088 Email: servisas@servicenet.lt www.servicenet.lt ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel: +40 21 2101969 SERBIA & MONTENEGRO Tehnicom Service d.o.o. Viline vode bb Slobodna zona Beograd , L12/4 Belgrade 11000 Tel.
Consumer Information Centers RUSSIA Tel: +7 095 961-1111 Tel: 8-800-200-0880 Website: www.philips.ru TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com Latin America ANTILLES Philips Antillana N.V. Kaminda A.J.E. Kusters 4 Zeelandia, P.O.
Consumer Information Centers BRASIL Philips da Amazônia Ind. Elet. Ltda. Rua Verbo Divino, 1400-São Paulo-SP CEP-04719-002 Phones: 11 21210203 -São Paulo & 0800-701-0203-Other Regions without São Paulo City CHILE Philips Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile Phone: (02)-730 2000 Fax : (02)-777 6730 COLOMBIA Industrias Philips de Colombia S.A.-Division de Servicio CARRERA 15 Nr.
Consumer Information Centers PERU Philips Peruana S.A. Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone: (01)-2136200 Fax : (01)-2136276 URUGUAY Rambla O'Higgins 5303 Montevideo Uruguay Phone: (598) 619 66 66 Fax: (598) 619 77 77 Customer Desk: Phone: 0004054176 VENEZUELA Industrias Venezolanas Philips S.A. Apartado Postal 1167 Caracas 1010-A Phone: (02) 2377575 Fax : (02) 2376420 Canada CANADA Philips Electronics Ltd.
Consumer Information Centers AUSTRALIA Philips Consumer Electronics Consumer Care Center Level 1, 65 Epping Rd North Ryde NSW 2113 Phone: 1300 363 391 Fax : +61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (toll free) Fax : 0800 288 588 Asia BANGLADESH Philips Service Centre 100 Kazi Nazrul Islam Avenue Kawran Bazar C/A Dhaka-1215 Phone: (02)-812909 Fax : (02)-813062 CHINA SHANGHAI Rm 1007, Hongyun Building, No.
Consumer Information Centers HONG KONG Philips Electronics Hong Kong Limited Consumer Service Unit A, 10/F. Park Sun Building 103-107 Wo Yi Hop Road Kwai Chung, N.T. Hong Kong Phone: (852)26199663 Fax: (852)24815847 INDIA Phone: 91-20-712 2048 ext: 2765 Fax: 91-20-712 1558 BOMBAY Philips India Customer Relation Centre Bandbox House 254-D Dr.
Consumer Information Centers INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040 ext: 2100 Fax : (021)-794 7511 / 794 7539 KOREA Philips Consumer Service Jeong An Bldg.
Consumer Information Centers PHILIPPINES PHILIPS ELECTRONICS & LIGHTING, INC. Consumer Electronics 48F PBCOM tower 6795 Ayala Avenue cor VA Rufino St. Salcedo Village 1227 Makati City, PHILS Phone: (02)-888 0572, Domestic Toll Free: 1-800-10-PHILIPS or 1-800-10-744 5477 Fax: (02)-888 0571 SINGAPORE Accord Customer Care Solutions Ltd Authorized Philips Service Center Consumer Service 620A Lorong 1 Toa Rayoh Singapore 319762 Tel: +65 6882 3999 Fax: +65 6250 8037 TAIWAN Philips Taiwan Ltd.
Consumer Information Centers MOROCCO Philips Electronique Maroc 304,BD Mohamed V Casablanca Phone: (02)-302992 Fax : (02)-303446 SOUTH AFRICA PHILIPS SA (PTY) LTD Customer Care Center 195 Main Road Martindale, Johannesburg P.O. box 58088 Newville 2114 Telephone: +27 (0) 11 471 5194 Fax: +27 (0) 11 471 5123 E-mail: customercare.za@philips.com Middle East DUBAI Philips Middle East B.V. Consumer Information Centre P.O.
F1rst Choice Contact Information F1rst Choice Contact Information Country Code Telephone number Tariff Austria +43 0810 000206 € 0.07 Belgium +32 078 250851 € 0.06 Denmark +45 3525 8761 Local call tariff Finland +358 09 2290 1908 Local call tariff France +33 082161 1658 € 0.09 Germany +49 01803 386 853 € 0.09 Greece +30 00800 3122 1223 Free of charge Ireland +353 01 601 1161 Local call tariff Italy +39 840 320 041 € 0.
