MSDS

MATERIAL SAFETY DATA SHEET Page 1 of 3

PRODUCT: PL-T 4 Pin compact Fluorescent ALTO Lamps 18,26,32,42 WATTS

SECTION 1: MANUFACTURER

Manufacturer’s Name and Address: Philips Lighting Company

A Division of Philips Electronics

North America Corporation

200 Franklin Square Drive

P.O. Box 6800

Somerset, NJ 08875

Emergency Telephone Number: (800) 424-9300 CHEMTREC

(732) 563-3197 Safety and Compliance

Other Information Calls: (732) 563-3089

SECTION 2: HAZARDOUS INGREDIENTS

OSHA PEL ACGIH APPROX. WT. %

mg/m

Phosphor Powder 15 10 less than 2

Yttrium Oxide: EU(1314-36-9) 1 1

Cerium Magnesium

Aluminate:Tb (67542-72-7) N/A N/A

Bismuth (7440-69-9) none est none est less than .15

Indium (7440-74-6) .1 .1 less than .15

Copper/ Zinc

(7440-50-8/7440-66-6) As metal none As metal none less than 1

A division of

Philips Electronics North America Corporation

200 Franklin Square Drive

P.O. Box 6800

Somerset, NJ 08875-6800

Tel: 732.563.3000

PAGE 1
Page 1 of 3 MATERIAL SAFETY DATA SHEET PRODUCT: PL-T 4 Pin compact Fluorescent ALTO Lamps 18,26,32,42 WATTS SECTION 1: MANUFACTURER Manufacturer’s Name and Address: Philips Lighting Company A Division of Philips Electronics North America Corporation 200 Franklin Square Drive P.O.
PAGE 2
PL-T 4 Pin compact Fluorescent ALTO Lamps Page 2 of 3 SECTION 2: HAZARDOUS INGREDIENTS(cont’d) OSHA PEL Mercury (7439-97-6) .1 Inert ingredients (glass, plastic, etc.) ACGIH .025 APPROX. WT. % <50ppm 97 SECTION 3: CHEMICAL/PHYSICAL DATA Not applicable. This item is a light bulb. The bulb is glass, the base is a coated aluminum. The coating is inert. SECTION 4: FIRE AND EXPLOSION DATA FIRE AND EXPLOSION DATA NOT APPLICABLE -- under extreme heat, glass envelope might melt or crack.
PAGE 3
PL-T 4 Pin compact Fluorescent ALTO Lamps Page 3 of 3 SECTION 7: PRECAUTIONS FOR SAFE HANDLING AND USE High light output under widely varying conditions:>90% of rated lumens in ambient temperatures from 23oF to 130oF. Normal precautions should be taken for the collection of broken glass. Waste Disposal Method: At the end of rated life, when this lamp is removed from service, it will be subjected to the current Toxic Characteristic Leaching Procedure (TCLP) prescribed by the Environmental Protection Agency.