Specifications

Remote Control and Receiver-Transceiver Specifications and Requirements
for Windows Media Center in Windows Operating Systems
53
Design Variation: Green Start Button with Custom Keycap
If the Green Start button subassembly does not meet your device design requirements because
of incompatibility with device depth, switch type, or general device housing and design, a custom
keycap and subassembly can be constructed using the requirements that are shown in Figure 20.
While the ridge and dome dimensions shown in Figure 20 are required, the remaining attributes
of your custom keycap are up to you.
All custom keycap designs for the Green Start button subassembly must be manufactured and
obtained through a certified supplier. The supplier that is certified to manufacture and distribute
the Green Start button subassembly is listed in the ―Resources‖ section under "Certified Supplier
for Green Start Button Subassembly‖, later in this document.
Figure 20: Illustration showing an example custom keycap with a ridge and poured dome
lens
Design Variation: Glowing Translucent Chamfer Insert
Optional design variations can be implemented on the device housing to add emphasis to the
Green Start button. For example, adding a transparent chamfer piece with a backlight around the
Green Start button can create a glowing chamfer effect. The recommended color for backlighting
the transparent chamfer is green.