Specifications

Remote Control and Receiver-Transceiver Specifications and Requirements
for Windows Media Center in Windows Operating Systems
122
Offset
Name
Value
Description
0
CMD_BOOT_EXIT
0xF4
Command: Exit the bootloader
Description
When the device receives this command, it should exit the bootloader, reset the device, and
resume normal operation.
CMD_BOOT_GETVERSION – Get Bootloader Version
EMVER_EMULATOR_V2 ONLY
Message ID: CMD_BOOT_GETVERSION
Message length: 1 byte
Message direction: Host to device
Offset
Name
Valu
e
Description
0
CMD_BOOT_GETVERSI
ON
0xF5
Command: Return the firmware
version of the bootloader code
Description
Return the firmware version of the bootloader code. The actual version that is returned is
inconsequential. The host uses the RSP_BOOT_VERSION response as an indication that the
device has successfully entered the bootloader.
Response
Description
RSP_BOOT_VERSION
Return the bootloader version
CMD_BOOT_SETWAKEPATTERN – Set Wake Pattern
EMVER_EMULATOR_V2 ONLY
Message ID: CMD_BOOT_SETWAKEPATTERN
Message length: 4 bytes
Message direction: Host to device
Offs
et
Name
Value
Description
0
CMD_BOOT_SETWAKEPATTE
RN
0xef
Command: Set the wake pattern
1
Protocol
Numb
er
Protocol for the Wake button