Specifications

Remote Control and Receiver-Transceiver Specifications and Requirements
for Windows Media Center in Windows Operating Systems
111
The following values are accepted in the EMVER field:
Name
Value
Description
EMVER_EMULATOR_V1
0x01
The device is using the old (Version 1)
emulator interface
EMVER_EMULATOR_V2
0x02
The device is using the newer (Version 2)
emulator interface.
RSP_FLASHLED – Respond Indicating that the Device
Successfully Flashed the LED
EMVER_EMULATOR_V2 ONLY
Message ID: RSP_FLASHLED
Message length: 2 bytes
Message direction: Device to host
Offset
Name
Value
Description
0
RSP_PORT_SYS
0xFF
System response
1
RSP_FLASHLED
0x23
Respond indicating that device
successfully flashed the LED
Description
The device returns this response to the host after successfully flashing the LED in response to a
CMD_FLASHLED command.
Responses to Commands: Error Cases
All responses in this section are returned to the host over the EP1 IN endpoint.
The following responses are available when there is an error:
 RSP_CMD_ILLEGAL – Illegal command.
 RSP_TX_TIMEOUT – Error for transmit time-out.
RSP_CMD_ILLEGAL – Illegal Command
Message ID: RSP_CMD_ILLEGAL
Message length: 2 bytes
Message direction: Device to host