Specifications

Remote Control and Receiver-Transceiver Specifications and Requirements
for Windows Media Center in Windows Operating Systems
100
 RSP_GETWAKESOURCE – Respond with wake source.
 RSP_EQIRTXPORTS – Respond with current transmit port mask.
 RSP_EQIRRXPORTEN – Respond with current IR receive port mask.
 RSP_GETPORTSTATUS – Respond with transmit port status.
 RSP_EQIRRXCFCNT – Respond with received carrier count information.
 RSP_EQIRNUMPORTS – Respond with number of ports.
 RSP_EQWAKESUPPORT – Respond with details about device wake capabilities.
 RSP_EQWAKEVERSION – Respond with details about the current wake pattern.
 RSP_EQDEVDETAILS – Respond with details about device capabilities.
 RSP_EQEMVER – Respond with the interface version used by the emulator.
RSP_EQIRCFS – Respond with IR Carrier for Transmission
Message ID: RSP_EQIRCFS
Message length: 4 bytes
Message direction: Device to host
Offset
Name
Value
Description
0
RSP_PORT_IR
0x9F
IR response
1
RSP_EQIRCFS
0x06
Response ID – respond with IR
carrier for transmission
2
CP
Number
Carrier prescalar
3
CC
Number
Carrier period
Description
This is the response used to return the carrier frequency to the host. Specifically, this sends the
carrier frequency used to transmit IR. The RSP_EQIRRXCFCNT response is used to send carrier
information to the host for received IR.
For a description of the prescalar and period values, see the topic CMD_SETIRCFS earlier in this
document.
RSP_EQIRTIMEOUT – Respond with Current IR Time-Out
Message ID: RSP_EQIRTIMEOUT
Message length: 4 bytes
Message direction: Device to host
Offset
Name
Value
Description
0
RSP_PORT_IR
0x9F
IR response