Specifications

Remote Control and Receiver-Transceiver Specifications and Requirements
for Windows Media Center in Windows Operating Systems
98
Response
Description
RSP_EQWAKEVERSION
Respond with details about current wake
pattern
Miscellaneous Commands
The miscellaneous commands are sent to the device over the EP1 OUT endpoint. Responses to
these commands are returned to the host over the EP1 IN endpoint.
The following miscellaneous commands are available:
 CMD_NOP – No operation.
 Flush
CMD_NOP – No Operation
Message ID: CMD_NOP
Message length: 2 bytes
Message direction: Host to device
Offset
Name
Value
Description
0
CMD_PORT_SYS
0xFF
System command
1
CMD_NOP
0xFF
Command ID - no operation
Description
Does nothing. This operation is a No-Op. When the firmware receives this command, it should
ignore it and immediately re-enter its receive loop to receive the next command.
There is no response to this command.
Flush
Message ID: Flush
Message length: 1-31 bytes
Message direction: Host to device
Offset
Name
Value
Description
0
PORT_SER +
Length
0xc0 -
0xDF
PORT_SER (0x6) is in the high
3 bits. The length of the data is
in the low 5 bits
1-31
Data
Numbers
Data to send. May be empty.
Description