21PT3962 L92000 3139 125 28641
INSTALLATION 2 Positioning of the TV set • 5 cm • 5 cm 5 cm • • Place TV set on a solid base (e.g. a TV/ Video cabinet) Leave at least 5 cm around each side of TV set for ventilation to avoid over-heating. Do not place TV set near a radiator or other sources of heat. Do not place TV set where it can be exposed to rain or excessive moisture. Mains Connection • • For correct mains voltage, refer to type sticker at the rear of the TV set. Consult your dealer if mains supply is different.
USEFUL TIPS 3 • Avoid heat and direct sunlight. • Avoid direct exposure to rain or water. • • • DO NOT leave your TV on standby for a prolonged period. Switch off your TV if not in use. This will allow the TV to be demagnetised, giving good picture. • Never repair the TV yourself – get a skilled personnel! • Clean the TV’s screen with a slightly damp soft cloth ONLY WHEN NECESSARY. Note : Do not use abrasive solvent as it can damage the screen’s coating.
CONNECTING PERIPHERAL EQUIPMENT 4 Equipment such as VCR, Laser disc player, VCD, DVD etc. can be connected to the video and audio (AV) sockets at the rear of the TV. Switch off mains power of the TV and equipment before making any connection. Connection for playback AV 2 in AV 1 in Monitor out VIDEO L S-VIDEO AUDIO R VCR VCR OR OR Laser disc player VCD/DVD AV 2 in AV 1 in Monitor out VIDEO L S-VIDEO AUDIO R VCR 1.
CONNECTING PERIPHERAL EQUIPMENT 5 Connection for recording AV 2 in AV 1 in Monitor out 1. From the TV channel you are watching • Connect the corresponding sockets of the VCR to the Monitor “out” sockets at the rear of the TV. VIDEO L S-VIDEO AUDIO R VCR AV 2 in AV 1 in Monitor out VIDEO S-VIDEO L AUDIO R VCR 1 VCR 2 2. From one VCR to another VCR • Connect the sockets of the VCR which you wish to record from to the corresponding sockets at either AV1 or AV2.
FUNCTIONS OF TV CONTROLS/SOCKETS 6 6 P V 7 V P In VIDEO L AUDIO R L 5 4 1 23 1 Mains Power button Switch mains power on or off. 2 Standby light indicator Indicate red light when standby mode is activated. 3 Remote sensor Aim remote control handset at remote sensor when operating the TV. 4 Headphone socket Connect headphone jack to socket for personal listening. 5 AV “in” sockets Connect to Video “out” and Audio “out” sockets of VCR, laser disc player, etc.
FUNCTIONS OF REMOTE CONTROL 1. STANDBY Switch off set temporarily to standby mode. (The red light indicator lights up when set is on standby mode). To switch on set, press STANDBY or any DIGIT button. 7 3 3. OSD (On-Screen Display) – Displays channel number and sound transmission mode. – Allows you to exit menu from screen. 4 4. DIGIT (0 - 9) Allows you select a channel. For a 2-digit channel number, the second digit must be entered before the “ – “ sign disappears. 5 6.
FUNCTIONS OF REMOTE CONTROL 2 AV OSD SLEEP 12 1 2 3 4 5 6 7 8 SMART 0 ± 13 ` 14 INC. SURR. MENU 15 16 17 A b CH H h SURF A/CH 4 f e 12. SLEEPTIMER Allows you to select a time period after which the set will switch to standby mode automatically. You can set the timer from OFF mode up to a maximum of 240 minutes. 13. SMART PICTURE Allows you to access 4 different types of picture settings. 9 SMART 8 14.
AUTOMATIC TUNING OF THE TV CHANNELS 9 Selecting the language and Automatic Tuning Press button MENU Result on TV Screen 1. Enter main menu. BLUE MUTE INSTALLATION BRIGHTNESS IIIII COLOUR IIII IIIIIIII CONTRAST 2 AV OSD SLEEP ❙ ❙ ❙ ❙ ❙ ❙ ❙ OFF É 28 18 38 ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ 1 2 3 4 5 6 7 8 9 SMART ❙ ❙ ❙ ❙ ❙ ❙ 2. Select INSTALLATION. SMART 0 ± SURF BLUE MUTE INSTALLATION BRIGHTNESS IIIII IIII COLOUR ` INC. SURR.
SELECTION OF TV SYSTEM 10 (Applicable to certain versions only) This feature allows you to select your desired TV system. If AUTO is selected, the respective colour system will be automatically selected according to the transmission system. Note : Select another system if reception is poor at AUTO mode. INC. SURR. MENU ➠ 1. Enter main menu. MENU INC. SURR. ➠ MENU INC. SURR. ➠ LANGUAGE ENGLISH AUTO STORE B SWAP B 2. Select 3. Enter INSTALLATION. installation mode.
MANUAL TUNING OF TV CHANNELS 11 Manual tuning of channels allows you to select your preferred channel number for every available programme. INC. SURR. MENU MENU ➠ 1. Enter main menu. INC. SURR. 2. Select INSTALLATION. ➠ MENU INC. SURR. ➠ LANGUAGE ENGLISH AUTO STORE B SWAP B 3. Enter installation mode. Press button Result on TV Screen 4. Select MANUAL. SWAP SKIP MANUAL 2 AV OSD SLEEP 1 2 3 4 5 6 7 8 SMART 0 ` 6. Select SEARCH. A h 7.
SWAPPING OF CHANNELS 12 This feature allows you to change the channel number to your choice for a particular TV station. INC. SURR. MENU ➠ 1. Enter main menu. INC. SURR. MENU 2. Select INSTALLATION. ➠ MENU INC. SURR. ➠ LANGUAGE ENGLISH B AUTO STORE SWAP B 3. Enter installation mode. Press button Result on TV Screen 4. Select SWAP. 2 AV OSD SLEEP 1 2 3 4 5 6 8 7 5. Enter SWAP menu.
SKIPPING OF CHANNELS 13 This feature allows you to skip channels which have bad or weak TV signal or channels that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by the CH (Channel) + or – button. you can only have access to the channel by the DIGIT (0 - 9) buttons. INC. SURR. MENU ➠ 1. Enter main menu INC. SURR. MENU MENU ➠ 2. Select INSTALLATION. INC. SURR. ➠ LANGUAGE ENGLISH B AUTO STORE SWAP B 3. Enter installation mode.
FINE TUNING OF TV CHANNELS 14 This feature allows you to adjust the picture reception in area of weak reception. 1 2 3 4 5 6 7 8 9 SMART ± ➠ MENU INC. SURR. ➠ MENU INC. SURR. ➠ SMART 0 SURF A/CH BLUE MUTE OFF É INSTALLATION 28 BRIGHTNESS IIIII IIII 18 COLOUR ❙ ❙ ❙ ❙ ❙ ❙ ❙ ` ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ 1. Select the channel you want to finetune. 2. Enter main menu. 3. Select INSTALLATION. Press button Result on TV Screen 4. Enter installation mode.
SELECTING / ADJUSTING PICTURE AND SOUND SETTING 15 The picture and sound menu allow you to make adjustments to the picture and volume level. How to do picture and sound adjustments 1. Press MENU button to enter main menu. or button to select the items in the menu. 2. Use the 3. Do the adjustments or activation by the or button. 4. Press OSD button to exit menu from screen.
...
ACTIVATING THE CHILD LOCK 17 Lock feature allows you to lock channels which you want to prevent others or your children from watching programmes you deem undesirable. You can choose to lock up all the channels (inclusive of the 2 AV channels) or individual channel (up to a maximum of 5 channels). How to lock channels Press button Result on TV Screen 1. Enter main menu.
... ACTIVATING THE CHILD LOCK Press button 2 AV OSD SLEEP 1 2 3 4 5 6 7 8 Result on TV Screen CHANGE CODE CHANNEL LOCK CLEAR ALL XXXX ALL NO B CHANGE CODE CHANNEL LOCK CLEAR ALL XXXX ALL NO B CHANGE CODE CHANNEL LOCK CLEAR ALL XXXX ALL YES B 9 SMART SMART 0 ± ` 8. Select LOCK. INC. SURR. MENU A b OR 7. Select ALL if you choose to lock all the channels. You can also choose to lock individual channel (up to a maximum of 5). 18 CH H h SURF A/CH 4 f e 9.
ACTIVATING THE CLOCK 19 (Applicable to certain versions only) The Clock feature allows you to set the clock to switch to another channel at a specified time while you are watching another channel or when the TV is on standby mode. Note : For the clock to function, the set must not be switched off. Once the set is switched off, the clock is disabled. Press button 1. Enter main menu. MENU 2 AV OSD 1 2 3 5 6 8 7 2. Select CLOCK. SLEEP 4 SMART 0 ± ` INC. SURR.
ACTIVATING THE SLEEPTIMER / BLUE MUTE 20 Sleeptimer feature This feature allows you to select a time period after which the set will switch to standby mode automatically. You can set the timer from OFF up to a maximum of 240 minutes. How to activate the Sleeptimer feature Press button 2 AV OSD SLEEP 1 2 3 4 5 6 8 7 1. Enter main menu. 2. Select SLEEPTIMER.
USING THE SURF FEATURE 21 This feature allows you to create a surf list. You can select up to a maximum of 8 channels and view quickly the selected channels by the control handset. How to add a channel to the surf list Press button Result on TV Screen 1. Enter main menu. MENU 2. Select SURF. CHILD LOCK CLOCK SURF BLUE MUTE INSTALLATION É B A/CH OFF B 3. Select SURF option. After selection of surf option, exit menu from OSD button.
USING THE ALTERNATE CHANNEL FEATURE 22 When you are viewing a channel and decide to view the previous channel, use this feature to alternate between the two channels. How to activate the Alternate Channel feature Press button MENU Result on TV Screen 1. Enter main menu. BLUE MUTE INSTALLATION BRIGHTNESS IIIII IIII COLOUR IIIIIIII CONTRAST 2 AV OSD SLEEP ❙ ❙ ❙ ❙ ❙ ❙ ❙ OFF É 28 18 38 ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ 1 2 3 4 5 6 7 8 9 SMART SMART 0 ± 2. Select SURF. ` INC. SURR.
SMART PICTURE AND SOUND 23 Smart Picture Smart Picture offers you a choice of 4 settings – RICH, NATURAL, SOFT and PERSONAL. SMART • 2 AV OSD SLEEP 1 2 3 4 5 6 7 8 SMART ± Press ` button repeatedly to cycle through the 4 settings to select your desired picture setting. 9 NATURAL SMART 0 RICH ` Definition of Picture Settings : Emphasizes very vibrant colours. (Suitable for AV mode in brightly-lit condition) NATURAL : Emphasizes natural and original colours.
T ELETEXT 24 If TV channel broadcast contains teletext information, each channel that broadcasts teletext transmits a page (index page) with information on how to use the teletext system - usually on page 100. The system transmitted is indicated in the option line at the bottom of the screen. 1 On/Off teletext b Press button once to switch on or off teletext display (A channel in which teletext is being transmitted must be selected). 2 2 AV OSD SLEEP 1 2 3 4 5 6 7 8 2 SMART 0 ` INC.
GENERAL INFORMATION / BEFORE CALLING SERVICE 25 Safety Disconnect mains plug when : – the red light below the TV screen is flashing continuously. – a bright white line is displayed across the screen. – cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth. – there is a lightning storm. – the set is left unattended for a prolonged period of time. Before calling Service Make these simple checks before calling for service.
SPECIFICATIONS 26 Picture tube size 54 cm Picture tube visible area 51 cm Audio Output 2x5W Set dimensions Width Height Depth 600 mm 487 mm 454 mm Nett weight of set 26 kg TV System PAL B/G Versions 56 57 69 x x x PAL B/H 79 x PAL D/K x x x x PAL I x x x x SECAM B/G x x x x SECAM D/K x x x x SECAM K1 x x x x NTSC M x x x x NTSC Playback x x x x PAL 60 Playback x x x x Note For Operating Voltage, Frequency, Power Consumption and Version Number, r
