21PT3952 L92000 3139 125 28591
INSTALLATION 2 Positioning of the TV set • 5 cm • 5 cm 5 cm • • Place TV set on a solid base (e.g. a TV/ Video cabinet) Leave at least 5 cm around each side of TV set for ventilation to avoid over-heating. Do not place TV set near a radiator or other sources of heat. Do not place TV set where it can be exposed to rain or excessive moisture. Mains Connection • • For correct mains voltage, refer to type sticker at the rear of the TV set. Consult your dealer if mains supply is different.
USEFUL TIPS 3 • Avoid heat and direct sunlight. • Avoid direct exposure to rain or water. • • • DO NOT leave your TV on standby for a prolonged period. Switch off your TV if not in use. This will allow the TV to be demagnetised, giving good picture. • Never repair the TV yourself – get a skilled personnel! • Clean the TV’s screen with a slightly damp soft cloth ONLY WHEN NECESSARY. Note : Do not use abrasive solvent as it can damage the screen’s coating.
CONNECTING PERIPHERAL EQUIPMENT 4 Equipment such as VCR, Laser disc player, VCD, DVD etc. can be connected to the video and audio (AV) sockets at the rear of the TV. Switch off mains power of the TV and equipment before making any connection. Connection for playback AV 2 in AV 1 in Monitor out VIDEO L S-VIDEO AUDIO R VCR VCR OR OR Laser disc player VCD/DVD AV 2 in AV 1 in Monitor out VIDEO L S-VIDEO AUDIO R VCR 1.
CONNECTING PERIPHERAL EQUIPMENT 5 Connection for recording AV 2 in AV 1 in Monitor out 1. From the TV channel you are watching • Connect the corresponding sockets of the VCR to the Monitor “out” sockets at the rear of the TV. VIDEO L S-VIDEO AUDIO R VCR AV 2 in AV 1 in Monitor out VIDEO S-VIDEO L AUDIO R VCR 1 VCR 2 2. From one VCR to another VCR • Connect the sockets of the VCR which you wish to record from to the corresponding sockets at either AV1 or AV2.
FUNCTIONS OF TV CONTROLS/SOCKETS 6 6 P V 7 V P In VIDEO L AUDIO R L 5 4 1 23 1 Mains Power button Switch mains power on or off. 2 Standby light indicator Indicate red light when standby mode is activated. 3 Remote sensor Aim remote control handset at remote sensor when operating the TV. 4 Headphone socket Connect headphone jack to socket for personal listening. 5 AV “in” sockets Connect to Video “out” and Audio “out” sockets of VCR, laser disc player, etc.
FUNCTIONS OF REMOTE CONTROL 1. STANDBY Switch off set temporarily to standby mode. (The red light indicator lights up when set is on standby mode). To switch on set, press STANDBY or any DIGIT button. 2. AV Selects the AV channels. 3. OSD (On-Screen Display) – Displays channel number and sound transmission mode. – Allows you to exit menu from screen. 7 2 1 5.
FUNCTIONS OF REMOTE CONTROL 2 AV OSD SLEEP 11 1 2 3 4 5 6 7 8 9 0 SAP 12 INC. SURR. 13 SURF A/CH MENU 14 15 A CH H SMART SMART ± ` 8 11. SLEEPTIMER Allows you to select a time period after which the set will switch to standby mode automatically. You can set the timer from OFF mode up to a maximum of 240 minutes. 12. SAP Allows you to switch to stereo, SAP (Second Audio programme) or mono sound.
INSTALLATION OF THE TV CHANNELS 9 Selecting the language, tuner type and automatic tuning of the channels Press button MENU Result on TV Screen 1. Enter main menu. BLUE MUTE INSTALLATION BRIGHTNESS IIIII COLOUR IIII IIIIIIII CONTRAST ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ OFF É 28 18 38 2 AV OSD SLEEP 1 2 3 4 5 6 7 8 9 2. Select INSTALLATION.
SKIPPING OF CHANNELS 10 This feature allows you to skip channels which have bad or weak TV signal or channels that you do not watch often. Note : Once a channel is skipped, you cannot have access to it by the CH (Channel) + or – button. you can only have access to the channel by the DIGIT (0 - 9) buttons. INC. SURR. MENU INC. SURR. MENU ➠ 1. Enter main menu. ➠ MENU INC. SURR. ➠ 2. Select 3. Enter INSTALLATION. installation mode. Press button OSD Result on TV Screen 4.
FINE TUNING OF TV CHANNELS 11 This feature allows you to adjust the picture reception in area of weak reception. 1 2 3 4 5 6 7 8 INC. SURR. MENU ➠ MENU INC. SURR. ➠ 9 SMART ± ➠ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ SMART 0 SURF A/CH BLUE MUTE OFF INSTALLATION É 28 BRIGHTNESS IIIII IIII 18 COLOUR ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ` 1. Select the 2. Enter main channel you menu. want to fine-tune. 3. Select INSTALLATION. Press button Result on TV Screen 4. Enter installation mode.
NAMING OF AV CHANNELS 12 This feature allows you to name your AV channels according to a pre-set name list : AV, EXT, GAM, DVD, VCD, VCR or LD. INC. SURR. MENU 1. Enter main menu. ➠ MENU INC. SURR. ➠ 2. Select INSTALLATION. MENU INC. SURR. ➠ LANGUAGE ENGLISH TUNER ANTENNA É AUTO INSTALL 3. Enter installation mode. Press button Result on TV Screen 4. Press button repeatedly until EXTERNAL is selected. SKIP MANUAL EXTERNAL É É É 2 AV OSD SLEEP 1 2 3 4 5 6 7 8 9 5.
SELECTING/ADJUSTING PICTURE AND SOUND SETTING 13 The picture and sound menu allow you to make adjustments to the picture and volume level. How to do picture and sound adjustments 1. Press MENU button to enter main menu. 2. Use the or button to select the items in the menu. or button. 3. Do the adjustments or activation by the 4. Press button to exit menu from screen.
...
ACTIVATING THE CHILD LOCK 15 Lock feature allows you to lock channels which you want to prevent others or your children from watching programmes you deem undesirable. You can choose to lock up all the channels (inclusive of the 2 AV channels) or individual channel (up to a maximum of 5 channels). How to lock channels Press button Result on TV Screen 1. Enter main menu.
... ACTIVATING THE CHILD LOCK Press button 2 AV OSD 1 2 3 4 5 6 8 7 OR SLEEP 7. Select ALL if you choose to lock all the channels. You can also choose to lock individual channel (up to a maximum of 5). 16 Result on TV Screen CHANGE CODE CHANNEL LOCK CLEAR ALL XXXX ALL NO B CHANGE CODE CHANNEL LOCK CLEAR ALL XXXX ALL NO B CHANGE CODE CHANNEL LOCK CLEAR ALL XXXX ALL YES B 9 SURF 0 A/CH SAP 8. Select LOCK. INC. SURR. MENU A CH H SMART SMART ± ` 9.
ACTIVATING THE CLOCK 17 The Clock feature allows you to set the clock to switch to another channel at a specified time while you are watching another channel or when the TV is on standby mode. Note : For the clock to function, the set must not be switched off. Once the set is switched off, the clock is disabled. Press button 1. Enter main menu. MENU 2. Select CLOCK.
ACTIVATING THE SLEEPTIMER / BLUE MUTE 18 Sleeptimer feature This feature allows you to select a time period after which the set will switch to standby mode automatically. You can set the timer from OFF up to a maximum of 240 minutes. How to activate the Sleeptimer feature Press button Result on TV Screen 2 AV OSD SLEEP 1 2 3 4 5 6 7 8 9 MENU 1. Enter main menu. 2. Select SLEEPTIMER.
USING THE SURF FEATURE 19 This feature allows you to create a surf list. You can select up to a maximum of 8 channels and view quickly the selected channels by the control handset. How to add a channel to the surf list Press button Result on TV Screen 1. Enter main menu. MENU 2. Select SURF. CHILD LOCK CLOCK SURF BLUE MUTE INSTALLATION É B A/CH OFF B 3. Select SURF option. After selection of surf option, exit menu from OSD button.
USING THE ALTERNATE CHANNEL FEATURE 20 When you are viewing a channel and decide to view the previous channel, use this feature to alternate between the two channels. How to activate the Alternate Channel feature Press button MENU Result on TV Screen 1. Enter main menu. BLUE MUTE INSTALLATION BRIGHTNESS IIIII IIII COLOUR IIIIIIII CONTRAST ❙ ❙ ❙ ❙ ❙ ❙ ❙ OFF É 28 18 38 ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ 2 AV OSD SLEEP 1 2 3 4 5 6 7 8 9 ❙ ❙ ❙ ❙ ❙ ❙ 2. Select SURF.
SMART PICTURE AND SOUND 21 Smart Picture Smart Picture offers you a choice of 4 settings – RICH, NATURAL, SOFT and PERSONAL. SMART • INC. SURR. MENU A CH H SMART SMART ± ` Press ` button repeatedly to cycle through the 4 settings to select your desired picture setting. RICH NATURAL SOFT Definition of Picture Settings RICH : Emphasizes very vibrant colours. (Suitable for AV mode in brightly-lit condition) NATURAL : Emphasizes natural and original colours. SOFT : Emphasizes warm colours.
GENERAL INFORMATION / BEFORE CALLING SERVICE 22 Safety Disconnect mains plug when : – the red light below the TV screen is flashing continuously. – a bright white line is displayed across the TV screen. – cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth. – there is a lightning storm. – the set is left unattended for a prolonged period of time. Before calling Service Make these simple checks before calling for service.
SPECIFICATIONS 23 Picture tube size 54 cm Picture tube visible area 51 cm Audio Output 2x5W Tuning System PLL TV System NTSC M Operating voltage 110V ~, 60 Hz Nominal Power Consumption 55 W Maximum power Consumption 104 W Set dimensions Width Height Depth 600 mm 487 mm 454 mm Nett weight of set 26 kg